Skip to content
  • On order
134.40 x 21.00 x 48.00 x 23.75mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19 134.40 x 21.00 x 48.00 x 23.75mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19

Forged connecting rods Honda - 1.6L 16V - D16 / ZC for forged pistons

€573.12 (tax incl.)
€716.40 (tax incl.) -20%

Set of 4 forged 4340 steel connecting rods for Honda D16 / ZC 1.6 16V (19 mm pin).

  • Brands: Manley
  • Compatibility: Civic, CRX, Integra, Accord
  • Engine codes: D16A, D16Y, D16Z, ZC
  • Bolts included: ARP 2000
14013-4
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

The Honda D16 / ZC 1.6 16V engine

The Honda D16 family, together with its Japanese ZC counterpart, covers the 1.6-litre (1590 cc) inline-four engines that powered the Civic, CRX, Integra and Accord from 1987 to 2005. With a 75 mm bore and a 90 mm stroke, this naturally aspirated engine came in SOHC and DOHC versions, including the VTEC variants (D16Z6, D16Y8) prized for their top-end pull and high-rpm smoothness.

Light, sturdy and easy to build, the D16/ZC is a favourite base for street builds and amateur competition alike. An efficient head and free-revving character naturally invite more power: intake, exhaust, camshafts, VTEC swap, even forced induction. As soon as load exceeds the factory envelope, the sintered stock rod becomes the weak link of the bottom end.

Forged connecting rods

Machined from high-strength 4340 steel, forged connecting rods reinforce the D16/ZC bottom end as soon as power climbs. They become essential when switching to forged pistons, running an aggressive VTEC build, holding sustained high rpm or adding forced induction (turbo or supercharger), all cases where the original rod reaches its limits.

Designed to withstand the heavy loads of built engines, these forged rods suit every discipline (track and roll racing, drift, drag, rally, hillclimb, time attack) and support Stage 2, Stage 3 and Stage 4+ builds, up to a full competition engine.

Technical specifications of the Honda D16 / ZC forged connecting rods

ReferenceBrandProfileBoltsPin diameter
OEM 19 mm
Small-end widthBig-end diameter
OEM n.p.
Big-end widthCenter-to-center
OEM 137,01 mm
Weight
per rod
14013-4 Manley H ARP 2000-3/8"-41mm 19 mm 48,01 mm 22,81 mm 137,01 mm 525 g

Torque and bolt stretch

RodBoltsTorqueRecommended stretch
Manley (14013-4) ARP 2000 88,1 N·m 0,147 – 0,157 mm

On a D16 or a ZC that spends time at high revs, the rod bolt is the link that decides everything: it must stay permanently in tension so that the cap never moves relative to the rod. Too little tightening brings that tension below the inertia load; the cap lifts imperceptibly, the contact face degrades, the shell is hammered, its clearance opens and it ends up driven out of its bore. Too much tightening leaves no more margin: the 3/8" ARP 2000 bolt moves into its plastic domain, keeps a residual elongation, loses its preload and fatigues faster, while the big end goes oval under the overload and the bearing bore stops being cylindrical. The values in the table below, published by the fastener manufacturer for the Manley rod offered here, frame exactly that compromise: they apply with no deviation, including at every reassembly. Stretch measurement with a dial gauge remains the reference method for checking the tension actually obtained; assemble with ARP lubricant, the kit instructions taking priority.

Technical guide

4340 forged steel: what is it?

4340 steel is a nickel-chromium-molybdenum alloy steel used in aerospace and motorsport alike. Forged then heat-treated (quench and temper), it offers excellent tensile strength, high fatigue resistance and real ductility. Compared with an original rod (often sintered/powder metal, optimised for series-production cost), a 4340 forged rod shows roughly +19% higher yield strength, +8% higher tensile strength and above all +19% to +37% higher fatigue strength, i.e. a fatigue life under cyclic loading several times longer. This is what makes forged 4340 the reference material as soon as boost and rpm climb.

Connecting rod profiles

H profile. With its “H” section, made up of two wide flat flanks joined by a central web, the rod has a solid, even shape from one end to the other. On built naturally aspirated engines that rev high, such as the D16 / ZC, it is the preferred profile, giving the bottom end a high level of strength.

How to choose your rod bolts?Logo ARP

This page offers a single bolt option, ARP 2000 in 3/8"-41 mm supplied with the Manley H-profile rod, so the choice is not about the grade but about the quality of the assembly. A rod bolt is tensioned, not simply nipped up by feel: the preload obtained depends directly on the cleanliness of the threads, on the presence of assembly lubricant and on the consistency of the tightening passes. On this 1.6 with a 19 mm pin and a 137.01 mm centre-to-centre, clean and blow out the threads, lubricate, tighten in three passes, then check preload through stretch measured with a dial gauge, bolt after bolt. The eight bolts can be reused as long as their free length has not grown; the table below recalls the characteristics of the grade and the values to respect.

Vis de bielle forgée ARP2000 ARP 2000 (tensile strength ~220,000 psi, i.e. ~1,517 MPa) is the high-performance standard. In 3/8" diameter it covers builds up to around 200 hp per cylinder and up to 8,500 rpm, the vast majority of built D16/ZC engines. Supplied with the rod set, it combines strength, reliability and versatility, with no storage constraints.

Measuring bolt stretch

Mesure de l'allongement d'une vis de bielle forgée à la jauge ARP

In addition to torque tightening, measuring rod-bolt stretch is the most reliable check for optimal preload. The check is done with the bolt fitted: place the gauge (dial indicator) on the two ends of the bolt and read its actual stretch, which must match the recommended value (see the torque & stretch table above). This method removes the friction variations inherent in torque tightening and secures the assembly on heavily stressed engines.

Buy the ARP stretch gauge →

The brands offered

MANLEY, an American forged connecting rod manufacturer since 1966. Machined from vacuum-degassed aerospace-grade 4340 steel, shot-peened and inspected one by one, its "Turbo Tuff" rods are offered here in H-beam profile with ARP 2000 bolts. A major name in engine building, from street to competition.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the Honda D16 / ZC engine

These forged connecting rods are compatible with all vehicles fitted with the Honda D16 / ZC engine (1.6L 16V naturally aspirated):

BrandModel (chassis)Engine codePowerYears
HONDA Civic IV (ED, EF) D16A1 / D16A6 / D16A7 / D16A9 / D16Z2 / D16Z5 107–130 hp 1987–1993
HONDA CRX II (ED, EE) D16A6 / D16A8 / D16A9 / D16Z5 110–130 hp 1987–1992
HONDA Civic V (EG, EH) D16A7 / D16A8 / D16A9 / D16Y1 / D16Z2 / D16Z6 107–131 hp 1991–1996
HONDA Civic VI (EJ, EK, EM1) D16B2 / D16Y4 / D16Y5 / D16Y7 / D16Y8 107–129 hp 1996–2001
HONDA CRX III / del Sol (EG, EH) D16Y7 / D16Y8 / D16Z6 107–129 hp 1992–1998
HONDA Integra (DA) D16A3 / ZC 118–130 hp 1989–1993
HONDA Accord VI (CG, CH) D16B6 / D16B7 107–116 hp 1997–2003

OEM reference: 13210-PM6-000 (set of 4 rods).

Why it’s the most cost-effective solution?

When a D16/ZC stock bottom end fails (broken, bent or scored rod), returning to the factory configuration means replacing rods and pistons, often damaged at the same time. The bill climbs quickly, for a mere restoration to stock.

For an equivalent budget, or even less, fitting 4340 forged rods paired with forged pistons brings far greater reliability and safety margin, plus real headroom for more power. It is the solution engine builders have trusted for over fifteen years.

For the same budget: more reliability, more potential, more longevity, rather than replacing one fragile part with another fragile part.

16 other products in the same category

Viewed products

Loading...