- In stock
SUPERTECH exhaust valve stem seals BMW M50TU M52 M54
Set of 12 exhaust valve stem seals for BMW 24V six-cylinders.
- Brand: SUPERTECH
- Engines: M50TU, M52, M52TU, M54, S50B32, S54B32, S50B30US, S52B32US
- Material: Viton (FKM)
BMW engines concerned
BMW 24-valve inline six-cylinder petrol engines with a 6 mm stem take these seals on the exhaust side: the M50 in its VANOS versions (M50B20TU and M50B25TU, from September 1992), the M52 in 2.0, 2.5 and 2.8 litre form, the M52TU, the M54 in 2.2, 2.5 and 3.0 litre form, the S50B32 and S54B32 M3 engines, as well as the S50B30US and S52B32US of the North American M3. They are found in the 3 Series E36 and E46, the 5 Series E34, E39 and E60, the 7 Series E38 and E65, the Z3, Z4, X3 and X5.
Each cylinder head has 12 exhaust valves, two per cylinder. Their original seal caps the guide and meters the oil that lubricates the stem; BMW supplies it in seal set 11 34 9 064 457 for the M50 VANOS, M52, M52TU, M54, S50B32, S54B32, S50B30US and S52B32US.
SUPERTECH exhaust valve stem seals
On the exhaust side, the stem seal works right next to the hottest valve in the engine. Once it hardens or cracks, it no longer holds back the oil, which runs down the stem and burns in the chamber: oil consumption, blue smoke, carbon on the valves and in the exhaust port. It must still let a little oil through: without it, the stem and guide wear.
SUPERTECH exhaust seals are moulded from Viton (FKM), a high-temperature compound chosen for its service life against the heat of the exhaust valves: SUPERTECH states they are designed for higher temperatures thanks to this material, and rates it at 204 °C (400 °F) continuous. They fit an 8.8 mm outside diameter guide for a 6 mm stem. The set of 12 covers every exhaust valve of one cylinder head; the polyacrylate (ACM) inlet seals are sold separately.
Stem seal technical specifications
| Part number | Brand | Position | Material | Stem Ø | Guide Ø | Seal outside Ø |
|---|---|---|---|---|---|---|
| VS-VBM6E-12 | SUPERTECH | Exhaust | Viton (FKM) | 6 mm | 8.8 mm | 12.2 mm |
Stem seal installation
| Part | Original | Reinforced |
|---|---|---|
| Exhaust stem seal | BMW set 11 34 9 064 457 | Replaced by this set |
| Inlet stem seal | 6 mm stem | VS-VBM6I-12 |
| Valve guides | Inside Ø 6.0 mm | GDE-BMW-M50-EI-12*2 |
| Valves | 6 mm stem | Inlet / Exhaust |
Technical guide
The brand offered
| Based in San Jose, California, SUPERTECH has been making valves, springs, guides and stem seals for racing for more than 30 years. Each new product is validated by finite element simulation, then with renowned engine builders, from drag racing to rally and circuit racing. |
Why two different materials?
Inlet and exhaust seals share the same dimensions, but the exhaust valve runs much hotter. SUPERTECH therefore keeps Viton (FKM), more resistant to temperature, for the exhaust (VS-VBM6-E) and polyacrylate (ACM) for the inlet (VS-VBM6-I). A BMW six-cylinder head needs 12 of each.
When valve stem seals must be replaced
- Oil consumption and blue smoke
- Valve removal or cylinder head rebuild
- Valve guide replacement
- Fitting reinforced valves or springs
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| 320i (E36) | M50B20TU | 150 hp | 1992-1995 |
| 520i 24V (E34) | M50B20TU | 150 hp | 1992-1996 |
| 325i / 325is (E36) | M50B25TU | 192 hp | 1992-1995 |
| 525i / 525iX (E34) | M50B25TU | 192 hp | 1992-1996 |
| 320i (E36) | M52B20 | 150 hp | 1995-1999 |
| 520i (E39) | M52B20 / M52TU B20 | 136-150 hp | 1996-2003 |
| 320i / 320Ci (E46) | M52TU B20 | 150 hp | 1998-2001 |
| Z3 2.0 (E36) | M52TU B20 | 150 hp | 1999-2003 |
| 323i / 323ti Compact (E36) | M52B25 | 163-170 hp | 1995-2000 |
| 523i (E39) | M52B25 / M52TU B25 | 163-170 hp | 1995-2000 |
| 323i / 323Ci (E46) | M52TU B25 | 163-170 hp | 1998-2000 |
| Z3 2.3 (E36) | M52TU B25 | 170 hp | 1998-2000 |
| 328i (E36) | M52B28 | 193 hp | 1995-1999 |
| 528i (E39) | M52B28 / M52TU B28 | 193 hp | 1995-2000 |
| 728i / 728iL (E38) | M52B28 / M52TU B28 | 193 hp | 1995-2001 |
| Z3 2.8 (E36) | M52B28 / M52TU B28 | 193 hp | 1996-2000 |
| 328i / 328Ci (E46) | M52TU B28 | 193-196 hp | 1998-2000 |
| 320i / 320Ci (E46) | M54B22 | 163-170 hp | 2000-2006 |
| 520i (E39 / E60) | M54B22 | 163-170 hp | 2000-2005 |
| Z3 2.2i (E36) / Z4 2.2i (E85) | M54B22 | 163-170 hp | 2000-2005 |
| 325i / 325xi / 325Ci / 325ti (E46) | M54B25 | 186-192 hp | 2000-2006 |
| 525i (E39 / E60 / E61) | M54B25 | 186-192 hp | 2000-2005 |
| Z3 2.5i / Z4 2.5i / X3 2.5i | M54B25 | 186-192 hp | 2000-2006 |
| 330i / 330xi / 330Ci (E46) | M54B30 | 228-231 hp | 2000-2006 |
| 530i (E39 / E60) | M54B30 | 228-231 hp | 2000-2005 |
| 730i / 730Li (E65 / E66) | M54B30 | 231 hp | 2003-2008 |
| Z3 3.0i / Z4 3.0i | M54B30 | 228-231 hp | 2000-2005 |
| X3 3.0i (E83) / X5 3.0i (E53) | M54B30 | 228-231 hp | 2000-2006 |
| M3 (E36) 3.2 | S50B32 | 321 hp | 1995-1998 |
| Z3 M 3.2 (E36) | S50B32 | 321 hp | 1997-2001 |
| M3 (E46) | S54B32 | 343 hp | 2000-2006 |
| M3 CSL (E46) | S54B32 | 360 hp | 2003 |
| Z3 M 3.2 (E36) | S54B32 | 325 hp | 2001-2003 |
| Z4 M (E85) | S54B32 | 343 hp | 2006-2008 |
| M3 (E36) 3.0 US | S50B30US | 239 hp | 1994-1995 |
| M3 (E36) 3.2 US | S52B32US | 243 hp | 1996-1999 |
| Z3 M 3.2 US | S52B32US | 239-243 hp | 1998-2000 |
OEM part number (BMW stem seal set): 11 34 9 064 457 (M50 VANOS, M52, M52TU, M54, S50B32, S54B32, S50B30US, S52B32US)
Remember the inlet valve stem seals
Exhaust valve stem seals are replaced together with the inlet valve stem seals. We offer the SUPERTECH seals for these engines:
| BMW M50TU M52 M54 inlet stem seals → |
-
Brand
-
ReferenceVS-VBM6E-12
-
In stock3 Items