Skip to content
  • New
  • In stock
Coussinets de bielles trimetal ACL Races Series 4B1060H-001, Cote 001 Coussinets de bielles trimetal ACL Races Series 4B1060H-001, Cote 001

SUPERTECH exhaust valve stem seals BMW S38 S50B30

€15.22 (tax incl.)
€19.02 (tax incl.) -20%

Set of 12 exhaust valve stem seals for BMW S38 and European S50B30, 7 mm stem.

  • Brand: SUPERTECH
  • Engines: S38B35, S38B36, S38B38, S50B30 (306S1)
  • Material: Viton (FKM)
VS-VW7E-12
2 in stock in France
On order, 15 to 30 days lead time
Available in stock in France
Pay in installments

BMW engines concerned

This set goes on the exhaust side of two 24-valve BMW M six-cylinders with 7 mm stems: the S38 of the M 635 CSi (E24) and M5 (E28 and E34), in B35, B36 and B38 form, from 1984 to 1995, and the European S50B30 (306S1) of the E36 M3 3.0, coupé, saloon and convertible, M3-R included, from 1992 to 1995.

There are twelve exhaust valves, two per cylinder. From the factory BMW supplies seal set 11 34 9 059 172; each seal grips the top of the guide and keeps oil to stem lubrication only.

SUPERTECH exhaust valve stem seals

In the S38 as in the S50, the exhaust valve bathes in burnt gases and passes its heat to the seal capping it. Over time the lip stiffens and then splits; oil then runs unchecked to the chamber, turns into blue smoke, forces top-ups between services and fouls valve heads and ports alike. The seal must still leave a film of oil, which protects the stem and guide pair.

For this exposed position SUPERTECH picks Viton (FKM), a high-temperature elastomer valued for its long life beside very hot exhaust valves: according to SUPERTECH it copes with higher temperatures this way, with 204 °C (400 °F) continuous. This seal fits a 9.8 mm guide and a 7 mm stem. Its 12 pieces serve the whole S38 or S50 exhaust; for the inlet, SUPERTECH supplies a separate polyacrylate (ACM) set.

Stem seal technical specifications

Part numberBrandPositionMaterialStem ØGuide ØSeal outside Ø
VS-VW7E-12 SUPERTECH Exhaust Viton (FKM) 7 mm 9.8 mm 13.2 mm

Stem seal installation

PartOriginalReinforced
Exhaust stem seal 11 34 9 059 172 Replaced by this set
Inlet stem seal 11 34 9 059 172 VS-VW7I-12
Valves 7 mm stem Inlet: S38 / S50B30
Exhaust: S38 / S50B30

Technical guide

The brand offered

SUPERTECH SUPERTECH, from San Jose on the American west coast, has engineered complete valvetrains for racing engines for more than 30 years. Every new design is modelled digitally before tests entrusted to renowned tuners, from drag strips to rally stages and race tracks.

Why two different materials?

Both seals on these six-cylinders share twin dimensions; only the heat they face sets them apart, far higher on the exhaust. SUPERTECH consequently reserves Viton (FKM) for the exhaust side (VS-VW7-E) and gives polyacrylate (ACM) to the inlet (VS-VW7-I). Twelve seals per side.

When valve stem seals must be replaced

  • Blue smoke, frequent oil top-ups
  • Head renovated or valves removed
  • Valve guides renewed
  • Uprated valves or springs fitted

Vehicle compatibility

BMW

ModelEngine codePowerYears
M 635 CSi (E24) S38 B35 286 hp 1984-1988
M 635 CSi (E24) S38 B35 260 hp 1986-1989
M5 (E28) S38 B35 286 hp 1985-1987
M5 (E28) S38 B35 260 hp 1986-1987
M5 (E34) S38 B36 315 hp 1988-1992
M5 (E34) S38 B38 340 hp 1992-1995
M5 Touring (E34) S38 B38 340 hp 1992-1995
M3 Coupé (E36) 3.0 S50 B30 (306S1) 286 hp 1992-1995
M3 Coupé (E36) 3.0 S50 B30 (306S1) 295 hp 1993-1995
M3 (E36) 3.0 S50 B30 (306S1) 286 hp 1994-1995
M3 Cabriolet (E36) 3.0 S50 B30 (306S1) 286 hp 1994-1995
M3-R Coupé (E36) 3.0 S50 B30 (306S1) 329 hp 1994-1995

OEM part number (BMW stem seal set): 11 34 9 059 172

Important: the S50B30 of the North American E36 M3 (306S2), with 6 mm stems, is not covered by this set.

Remember the inlet valve stem seals

Renew the inlet seals in that same job, with the head already off. For the S38 and S50B30 SUPERTECH offers this set:

BMW S38 S50B30 inlet stem seals →

11 other products in the same category

Loading...