- On order
Reinforced exhaust valves BMW N54B30
Set of 12 reinforced exhaust valves for BMW N54B30.
- Brands: SUPERTECH, FERREA
- Engines: N54B30
- Dimensions: 28.0 mm or 28.5 mm head, 6 mm stem
- Material: Inconel, sodium filled Inconel or Super Alloy, 1 or 3 grooves
BMW engines covered
The N54B30 is the 3.0 litre twin turbo inline six with double VANOS that BMW fitted from 2006 to 2016 to the 135i and 1 M Coupé, 335i, 535i, 740i, X6 xDrive35i and Z4 sDrive35i. Its valves are operated by roller finger followers with hydraulic lash adjustment.
The engine has 12 exhaust valves, BMW part number 11 34 7 573 840: 28.0 mm head, 6.0 mm stem, 114.7 mm length, held by 3-groove 11 34 1 461 405 collets. They already run hot as standard; more boost pressure or revs takes them beyond what they were designed for.
SUPERTECH and FERREA reinforced exhaust valves
When open, the exhaust valve of the N54B30 routes the gases left by combustion towards the two turbos, at the hottest point of the engine. In the metal, its head goes past 1,000 °C on this twin-turbo six-cylinder, whereas a naturally aspirated engine keeps it near 760 to 870 °C. The seat carries away about 75 % of that heat and the guide close to 20 %. An exhaust steel of the EV8 family, chosen as a basis for comparison, offers 550 MPa at 600 °C and then just 300 MPa at 800 °C. Once boost, revs or load go up, the head overheats, fatigues, distorts and lets gas through.
The reinforced versions switch to materials made for these heat levels. At SUPERTECH, every valve listed here is in chromed Inconel, a nickel superalloy holding 860 MPa at 730 °C and 554 MPa around 815 °C, roughly 85 % better than EV8 steel near 800 °C; the HS versions add a hollowed stem in which sodium, liquid from 97.8 °C, draws heat from the head down the shank. The FERREA valves of the Competition Plus range, here in nickel-rich Super Alloy, are credited with 20 % extra hot strength and 25 % longer seat life.
A +0.5 mm oversize is offered as well: stem and length do not move compared with the standard part, only the head goes from 28.0 to 28.5 mm. The cylinder gets rid of its spent gases sooner, fresh air finds more room and power climbs. The 12 exhaust seats then have to be cut to this dimension.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø OEM 28.0 mm | Stem Ø OEM 6 mm | Length OEM 114.7 mm | Grooves | Material |
|---|---|---|---|---|---|---|---|
| BMEVI-1054S-12 | SUPERTECH | Standard | 28.0 mm | 6 mm | 114.9 mm | 1 | Chrome coated Inconel |
| BMEVI-1054S-HS-12 | SUPERTECH | Standard | 28.0 mm | 6 mm | 114.9 mm | 1 | Sodium filled Inconel, chrome coated |
| BMEVI-1054S-HS-1-12 | SUPERTECH | +0.5 mm | 28.5 mm | 6 mm | 114.9 mm | 1 | Sodium filled Inconel, chrome coated |
| F2365P*12 | FERREA | Standard | 28.0 mm | 6 mm | 114.8 mm | 3 | Super Alloy (nickel base) |
| F2366P*12 | FERREA | +0.5 mm | 28.5 mm | 6 mm | 114.8 mm | 3 | Super Alloy (nickel base) |
F2366P*12: FERREA reduces the stem by 1 mm near the tip to allow the use of the original rocker arm.
Valve fitting
| Part | BMW original | Reinforced |
|---|---|---|
| Collets | 11 34 1 461 405 (3 grooves) | KPR-VW6-T (3 grooves) / KPR-6S-7 (single groove) |
| Valve stem seals | Kit 11 34 0 035 853 | VSI-BM60-E-12 (exhaust) |
| Valve guide | Inner Ø 6.0 mm |
The SUPERTECH valves have a single groove and are fitted with KPR-6S-7 collets; the 3-groove FERREA valves take 3-groove collets, original or KPR-VW6-T, preferably new.
A +0.5 mm oversize head requires exhaust seats recut to this dimension during the cylinder head rebuild.
On this double VANOS engine, SUPERTECH advises against oversized valves: depending on camshaft timing, a larger head can touch the piston.
Technical guide
Our brands
| SUPERTECH, a Silicon Valley outfit, has spent three decades making, for motorsport, valves, valve guides, springs and titanium retainers. The metal of every valve, stainless, titanium or Inconel, is settled for a given engine, then proven by tuners active in rallying, on circuits and in drag racing. | |
| FERREA Racing Components dates back to 1978 and two partners, Horacio Ferrea and Daniel Urrutia. In Florida and Argentina the firm turns out stainless, titanium and nickel superalloy valves, fitted by engine builders the world over, on NASCAR ovals and drag strips alike. |
How to choose
Gripped beneath the spring retainer, the two collets settle into either one groove or three grooves cut on the stem. That number changes the way the valve is held, and so the kind of use it suits best.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size 28.0 mm head, for an N54 whose exhaust seats are intact and have never been recut: fitted without machining, in SUPERTECH as in FERREA. |
+0.5 mm oversize 28.5 mm head: spent gases quit the cylinder sooner for the turbos and fresh charge enters more easily, so power rises (around 10 to 12 cfm per millimetre of head); seats recut to suit, which also recovers worn seats. Not advised by SUPERTECH with the double VANOS of this engine. |
| Grooves | 3 grooves The BMW arrangement stays in place, stem free to turn in its collets. Mildly modified road N54: nothing to add; new collets recommended (original or KPR-VW6-T). Downside: every harsh closing hits the bottom groove, the least thick one. Only FERREA version on this engine. |
Single groove Locked by the collets, the stem spares its groove and broader seating lowers friction: firm springs, high lift and high revs pass better. It is the version of every SUPERTECH valve, in Inconel with or without sodium, to favour on a heavily boosted N54. KPR-6S-7 collets required, preferably new. |
When reinforced valves become necessary
- Boost pressure raised by a remap (Inconel version advised)
- Turbos upsized, hybrid or swapped for a big single turbo
- More aggressive springs or camshafts
- Engine built for track, drift circuit or drag strip
- Factory valves burnt, pitted or already reworked
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| 135i (E82 / E88) | N54B30 | 306-326 hp | 2007-2013 |
| 1 M Coupé (E82) | N54B30 | 340 hp | 2011-2012 |
| 335i / 335xi / 335i xDrive (E90 / E91 / E92 / E93) | N54B30 | 306-326 hp | 2006-2013 |
| 535i / 535xi / 535i xDrive (E60 / E61) | N54B30 | 306 hp | 2006-2010 |
| 740i / 740Li (F01 / F02) | N54B30 | 306-326 hp | 2008-2015 |
| X6 xDrive35i (E71) | N54B30 | 306-326 hp | 2008-2014 |
| Z4 sDrive35i (E89) | N54B30 | 306 hp | 2009-2016 |
| Z4 sDrive35is (E89) | N54B30 | 340 hp | 2010-2016 |
OEM part number (exhaust valve): 11 34 7 573 840
Don't forget the inlet valves
Cylinder head of the N54 off? Now is the time to change the inlet side and, on the exhaust side, the valve stem seals, for a fresh assembly. The matching pages:
| BMW N53B30 N54B30 inlet valves → |
| 6 mm exhaust valve stem seals → |
-
Brand
-
ReferenceF2365P*12