Skip to content
  • On order
Reinforced inlet valves BMW 135i 335i 1M Z4 N54B30 Reinforced inlet valves BMW 135i 335i 1M Z4 N54B30

Reinforced inlet valves BMW N54B30

€388.68 (tax incl.)
€485.86 (tax incl.) -20%

Set of 12 reinforced inlet valves for BMW N54B30.

  • Brands: SUPERTECH, FERREA
  • Engine: N54B30
  • Dimensions: 31.4 mm, 31.5 mm, 31.9 mm or 32.0 mm head, 5 mm stem
  • Material: black nitride stainless steel, single groove (SUPERTECH); FERREA 3 grooves
F2367P*12
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines covered

The N54B30 is the 3.0 litre twin-turbo direct-injection inline six that BMW fitted from 2006 to 2016: 135i and 1 M, 335i, 535i, 740i, X6 xDrive35i and Z4 sDrive35i. Its double VANOS valvetrain works the valves through roller rocker arms with hydraulic lash adjustment.

Each engine takes 12 BMW inlet valves 11 34 7 553 775 with a 5 mm stem: 31.4 mm head, 5.0 mm stem, 106.6 mm length, held by collets 11 34 1 438 142. With a remap and raised boost, they take more heat and harder impacts than in standard form.

SUPERTECH and FERREA reinforced inlet valves

On the N54B30, twelve inlet valves, a pair per cylinder, govern the path for the air squeezed by the twin turbos. Under load each one rises from its seat and drops back onto it dozens of times in a single second, while its 5 mm stem runs through the guide without pause. They work at 400 to 550 °C, where stock chrome-silicon steel falters: 500 MPa at 500 °C, then only 250 MPa at 600 °C, just outside that window, so 50 % less. On the N54, every increase in boost, revs, lift or spring rate brings more impacts, friction and heat.

The reinforced valves rely on a chrome-nickel racing stainless of the EV8 family (21-4N): 650 MPa held at 500 °C, 30 % better than stock, and 550 MPa at 600 °C, 120 % better. On the SUPERTECH side, black nitriding gives the stem a harder, slipperier surface that cuts friction and wear against the guide. FERREA's parts are drawn from its Competition Plus series, which the maker credits with 20 % gains in hot strength and endurance plus 25 % longer seat life, along with a chromed stem.

Both brands also offer a +0.5 mm size: the head moves to 31.9 mm at SUPERTECH and 32.0 mm at FERREA, against 31.4 mm stock, the stem staying at 5 mm. The seat opening grows, the N54 cylinders fill better and power climbs, as long as every one of the twelve inlet seats is machined accordingly.

Inlet valve technical specification

Part numberBrandSizeHead Ø
OEM 31.4 mm
Stem Ø
OEM 5 mm
Length
OEM 106.6 mm
GroovesMaterial
BMIVN-1054S-12 SUPERTECH Standard 31.4 mm 5 mm 106.7 mm 1 Black nitride stainless steel
BMIVN-1054S-1-12 SUPERTECH +0.5 mm 31.9 mm 5 mm 106.7 mm 1 Black nitride stainless steel
F2367P*12 FERREA Standard 31.5 mm 5 mm 106.8 mm 3 Stainless, chrome stem
F2368P*12 FERREA +0.5 mm 32.0 mm 5 mm 106.8 mm 3 Stainless, chrome stem

BMIVN-1054S-12 and BMIVN-1054S-1-12: to be fitted with KPR-5.0-7S collets.

Fitting details

PartBMW originalReinforced
Valve collets 11 34 1 438 142 KPR-5.0-7S (1 groove)
Valve stem seals Kit 11 34 0 034 068 VSI-BM50-I-12 (inlet)
Valve guide Inner Ø 5.0 mm

The SUPERTECH valves have a single groove: they are fitted only with KPR-5.0-7S collets, never with the original ones. The FERREA valves have 3 grooves and are fitted with 5 mm 3-groove collets.

The +0.5 mm size needs inlet seats cut to the new dimension. Clearance is taken up hydraulically: no adjustment is needed after replacing the valves.

Oversized-head valves are not recommended on VANOS engines: depending on camshaft timing, a larger head may touch the piston.

Technical guide

Our brands

SUPERTECH Operating from San Jose, California, SUPERTECH has worked on competition engine valvetrains for more than 30 years. Each valve is thought out for its head, examined piece after piece by laser, radiography and ultrasound before approval with tuners on circuits and drag strips.
FERREA Two Argentine tuners created FERREA Racing Components in 1978 in Fort Lauderdale, Florida, where all production still happens today. Cut from bar and forged as one piece, its valves are fully finished on CNC machines and line up in NASCAR, at drag meets and on circuits.

How to choose

Collets seat in the groove under the upper retainer and lock the valve. The number of grooves changes how the stem is gripped, and so how it copes with revs.

CriterionOption 1Option 2
Size Standard size, 31.4 mm
For an N54 head with its 12 inlet seats still untouched: direct fit, no machining. SUPERTECH at 31.4 mm or FERREA at 31.5 mm, for a rebuild that stays faithful to stock.
+0.5 mm, 31.9 or 32.0 mm
With a slightly wider seat, more air gets in, some 10 to 12 cfm gained per millimetre of head, and power benefits. Seats recut to the new size; enlarged head not advised on this VANOS engine, depending on cam timing.
Grooves 3 grooves (FERREA)
Close to the original BMW design, the stem keeps the freedom to rotate. For a road N54 with springs and revs barely changed; 5 mm three-groove collets, preferably new. Limit: at high revs, impacts move onto the bottom groove, the thinnest point of the stem.
Single groove (SUPERTECH)
KPR-5.0-7S collets clamp the stem, leaving the groove almost unloaded and the wider contact limits friction. The valve copes better with reinforced springs, high lift and big boost, on circuit, in rally or drag racing. Original collets excluded, new parts advised.

When reinforced valves become necessary

  • More aggressive cam profiles or firmer springs
  • Redline pushed further up
  • Raised boost or bigger turbos on the N54
  • Head prepared for circuit or rally use
  • Damaged, tired or already repaired BMW valves

Compatible vehicles

ModelEngine codePowerYears
135i (E82 / E88) N54B30 306-326 hp 2007-2013
1 M Coupé (E82) N54B30 340 hp 2011-2012
335i / 335xi / 335i xDrive (E90 / E91 / E92 / E93) N54B30 306-326 hp 2006-2013
535i / 535xi / 535i xDrive (E60 / E61) N54B30 306 hp 2006-2010
740i / 740Li (F01 / F02) N54B30 306-326 hp 2008-2015
X6 xDrive35i (E71) N54B30 306-326 hp 2008-2014
Z4 sDrive35i (E89) N54B30 306 hp 2009-2016
Z4 sDrive35is (E89) N54B30 340 hp 2010-2016

OEM part number (inlet valve): 11 34 7 553 775

Important: these valves are specific to the N54B30; the N53B30, whose original inlet valve 11 34 7 552 952 has a 32.0 mm head, is not covered.

Related products

For an N54B30 head going back together, plan the exhaust valves and a fresh set of valve stem seals in the same order. The matching parts are here:

BMW N54B30 exhaust valves →
5 mm inlet valve stem seals →

11 other products in the same category

Viewed products

Loading...