Skip to content
  • In stock
ACL and King trimetal connecting rod bearings Ford Cosworth YB ACL and King trimetal connecting rod bearings Ford Cosworth YB ACL and King trimetal connecting rod bearings Ford Cosworth YB ACL and King trimetal connecting rod bearings Ford Cosworth YB

ACL and King trimetal connecting rod bearings Ford Cosworth YB

€68.19 (tax incl.)
€75.77 (tax incl.) -10%

Set of 8 trimetal connecting rod half-bearings for Ford Cosworth YB 2.0 16V.

  • Brands and treatment: ACL Race, King XP
  • Compatibility: Sierra RS Cosworth, Escort RS Cosworth
  • Engine codes: YBB, YBD, N5B, N5C, N5D, N5F
  • Available sizes: standard to +0.50 mm, increased-clearance version (HX / STDX)
4B2166H-STD
88 in stock in Europe (72h lead time)
Pay in installments

The Ford Cosworth YB four-cylinder engine

The Cosworth YB (2.0 litres) is a Ford 16-valve twin overhead camshaft four-cylinder engine, turbocharged, fitted to the Sierra RS Cosworth and the Escort RS Cosworth. ACL and King list the same bearing set for this engine: a single set covers the family.

From the factory, these engines are fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

Three layers make up a trimetal bearing: the steel back for stiffness, the copper-lead intermediate layer for load capacity, then the anti-friction running layer that protects the crankpin. This set includes 8 half shells, that is 4 pairs.

Where an aluminium bi-metal bearing, designed for low to medium loads, withstands about 8,000 psi, a performance trimetal bearing goes up to 12,000 psi: 50% extra margin. That is what keeps it durable on an engine boosted by a turbo or supercharger, or pushed to high rpm.

Technical specifications

Fitment dimensions common to all references
ACL / King bearings
Crankpin Ø 51.990 / 52.000 mm (King : 51.989 / 51.999 mm)
Housing bore Ø 55.000 / 55.020 mm (King : 54.999 / 55.019 mm)
Width 20.12 mm (King: 20 mm)
ReferenceBrand and treatmentSizeWall thickness (mm)
4B2166H-STD ACL Race - Untreated Standard 1.496
4B2166HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.483
4B2166H-.25 ACL Race - Untreated +0.25 1.621
4B2166H-.50 ACL Race - Untreated +0.50 1.746
CR4440XP King Racing - Untreated Standard 1.491
CR4440XP STDX King Racing - Untreated Std, increased clearance (STDX) 1.478
CR4440XP0.25 King Racing - Untreated +0.25 1.618
CR4440XP0.5 King Racing - Untreated +0.50 1.745

Running clearance

Between the crankpin and the bearing there is a small gap, the running clearance, in which the oil film circulates.

In operation there is no metal-to-metal contact: the crankpin turns on this oil film, which supports the whole load. The clearance determines its thickness. A clearance that is too tight hinders oil flow, heats the assembly and promotes seizure; one that is too wide lets oil leak away, weakens the film and makes oil pressure drop. The correct clearance balances oil flow and film strength.

Size / gradeWhen to choose itACL Race SeriesKing XP
Standard (STD) Standard journal, not reground 0.055 to 0.065 mm
Increased clearance (HX / STDX) Wider clearance: high oil flow, high rpm 0.080 to 0.090 mm
+0.25 mm Journal reground to 0.25 mm 0.055 to 0.065 mm
+0.50 mm Journal reground to 0.50 mm 0.055 to 0.065 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

Designed for engine building and motorsport, these ACL and King trimetal connecting rod bearings carry much more load than an original bearing, whether the engine gains power, revs higher or receives a turbo or supercharger. They are available in several sizes: the standard size, +0.25 and +0.50 mm regrind sizes and the HX / STDX version with increased clearance for high-revving engines or engines needing a high oil flow. That makes it possible to put a reground crankshaft back into service without changing range and to set the clearance for the oil and use.

The two brands

ACL ACL Bearing Company has been making high-performance engine bearings in Australia since 1949. Its Race Series offers precise trimetal bearings, available in many sizes and proven in tuned and racing engines worldwide.
King Racing King Engine Bearings, an Israeli manufacturer active since the 1960s, produces high-performance engine bearings. Its pMax Black trimetal alloy is designed to withstand heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No No
Available sizes Standard to +0.50 mm (+ increased clearance HX) Standard to +0.50 mm (+ increased clearance STDX)

Vehicle compatibility

This connecting rod bearing set fits the Cosworth YB four-cylinder engine of the following Ford models:

BrandModel (chassis)Engine codePowerYears
FORD SIERRA I Hatchback 2.0 4x4 N5B, YBB 204 hp 1985–1987
FORD SIERRA II Hatchback 2.0 RS Cosworth / 2.0 RS500 Cosworth / 2.0 16V Cosworth / 2.0 16V Cosworth Cat 4x4 N5B, N5C, N5D, YBB, YBD 204–227 hp 1987–1993
FORD ESCORT V (AAL, ABL) RS Cosworth 4x4 N5F 220 hp 1991–1995
FORD ESCORT VI (GAL, AAL, ABL) RS Cosworth 4x4 N5F 220 hp 1995–1998

Why replace the bearings

When a connecting rod bearing gives way, the damage quickly spreads beyond the part itself: a scored crankpin, debris carried through the whole oil circuit, a crankshaft to regrind at the very least, sometimes a rod and block lost. A bearing set costs far less than a regrind and is nothing compared with a complete engine rebuild. It is the cheapest part of the rotating assembly, yet the one whose failure is most expensive.

14 other products in the same category

Viewed products

Loading...