Skip to content
  • In stock
Tri-metal crankshaft main bearings ACL King Ford Cosworth YB Tri-metal crankshaft main bearings ACL King Ford Cosworth YB

Tri-metal crankshaft main bearings ACL King Ford Cosworth YB

€114.88 (tax incl.)
€127.64 (tax incl.) -10%

Set of 10 tri-metal crankshaft half bearings for the five main journals of Ford Cosworth YB engines (Ø 56.99 mm).

  • Brands: ACL Race and King Racing
  • Compatibility: Ford Sierra and Escort Cosworth, 2.0 L turbo petrol four-cylinder
  • Engine codes: N5B, N5C, N5D, N5F, YBB, YBD
  • Sizes available: standard to +0.50 mm (ACL) or +0.25 mm (King), increased clearance version (HX)
5M2167H-STD
87 in stock in Europe (72h lead time)
Pay in installments

The Ford Cosworth YB engine

The Cosworth YB is Ford's turbocharged 2.0 litre 16-valve four-cylinder petrol engine, fitted to the Sierra RS Cosworth (rear-wheel drive and 4x4) and the Escort RS Cosworth (engine codes N5B, N5C, N5D, N5F, YBB and YBD). ACL lists main bearing set 5M2167H for the Ford Cosworth 2.0L: a single set covers these engines.

The crankshaft of these engines runs on five main bearings. Each journal turns between two half shells, one seated in the block and the other in the main bearing cap: they carry the crankshaft. The ACL Race Series and King Racing tri-metal sets shown here replace them on built engines.

Tri-metal main bearings

A trimetal bearing combines three layers with complementary roles: a steel back that provides structural strength, a copper-lead intermediate layer that takes the heavy loads and an anti-friction running layer that protects the main journal. The complete set contains 10 half shells, i.e. 5 pairs.

An aluminium bi-metal bearing, intended for low to medium loads, tops out at around 8,000 psi; a performance trimetal bearing holds up to 12,000 psi, 50% more load capacity. It therefore gains strength and service life on turbocharged, supercharged or high-revving engines.

Technical specifications

Fitment dimensions common to all references
ACL bearings
Crankshaft journal Ø 56.990 / 57.000 mm
Housing bore Ø 60.620 / 60.640 mm
Width 23.75 mm
King bearings
Crankshaft journal Ø 56.99 / 57.00 mm
Housing bore Ø 60.62 / 60.64 mm
Width 23.7 mm
ReferenceBrand and treatmentSizeWall thickness (mm)
5M2167H-STD ACL Race - Untreated Standard 1.803
5M2167HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.79
5M2167H-.25 ACL Race - Untreated +0.25 1.928
5M2167H-.50 ACL Race - Untreated +0.50 2.053
MB5672XP King Racing - Untreated Standard 1.801
MB5672XP0.25 King Racing - Untreated +0.25 1.928

Running clearance

Running clearance is the space left between the bearing and the main journal, permanently filled by the oil film.

With the engine running, the main journal does not touch the bearing: it rides on this oil film, which takes the load. The clearance sets the film thickness. Too small, it restricts oil flow, raises the temperature and invites seizure; too large, it lets the oil escape, the film loses its load capacity and oil pressure falls. The right clearance combines sufficient lubrication with an oil film that keeps carrying the load.

Size / gradeWhen to choose itACL Race SeriesKing XP
Standard (STD) Standard journal, not reground 0.059 to 0.070 mm 0.057 mm - 0.070 mm
Increased clearance (HX) Wider clearance: high oil flow, high rpm 0.084 to 0.095 mm
+0.25 mm Journal reground to 0.25 mm 0.059 to 0.070 mm 0.057 mm - 0.070 mm
+0.50 mm Journal reground to 0.50 mm 0.059 to 0.070 mm

Check at assembly: lay a calibrated strip (Plastigauge) on the journal, tighten the main cap following the manufacturer's procedure, then compare the width of the crushed strip with the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

The ACL and King main bearings shown here are trimetal bearings built for engine tuning and racing. They withstand far higher loads than a standard bearing and come in several sizes: the standard size, +0.25 and +0.50 mm regrind sizes and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. This range lets you refit a reground crankshaft without changing product line and match the clearance to the oil and use chosen.

The two brands

ACL Founded in Australia in 1949, ACL Bearing Company designs high-performance engine bearings. Its Race Series brings together precision trimetal bearings, offered in a wide choice of sizes and fitted to built engines around the world.
King Racing An Israeli maker of high-performance engine bearings since the 1960s, King Engine Bearings developed the pMax Black trimetal alloy for heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No No
Available sizes Standard to +0.50 mm (+ increased clearance HX) Standard to +0.25 mm

Vehicle compatibility

This main bearing set fits the following vehicles, according to the engine code:

BrandModel (chassis)Engine codePowerYears
FORD SIERRA I Hatchback 2.0 4x4 N5B, YBB 204 hp 1985–1987
FORD SIERRA II Hatchback 2.0 RS Cosworth / 2.0 RS500 Cosworth / 2.0 16V Cosworth / 2.0 16V Cosworth Cat 4x4 N5B, N5C, N5D, YBB, YBD 204–227 hp 1987–1993
FORD ESCORT V (AAL, ABL) RS Cosworth 4x4 N5F 220 hp 1991–1995
FORD ESCORT VI (GAL, AAL, ABL) RS Cosworth 4x4 N5F 220 hp 1995–1998

Why replace the bearings

A failing main bearing does not fail alone: it scores the main journal, sends debris through the oil circuit and calls at least for a crankshaft regrind, when it does not damage the block as well. On a built engine, a bearing set costs only a fraction of a regrind, and even less of a full rebuild: it is the cheapest part of the crankshaft assembly and the one whose failure costs the most.

14 other products in the same category

Viewed products

Loading...