Sort and filter
- 1.2L 8v - XZ7R
- 1.3L 8v - TU2J2
- 1.3L 8v - TU24
- 1.4L 8v - TU3J2 TU3JP
- 1.6L 8v - TU5J2 TU5JP
- 1.6L 8v - XU5JA
- 1.6L 16v - EP6C/F THP Gen2 2010-2025 (with Valvetronic)
- 1.6L 16v - EP6D THP Gen1 2006-2010 (without valvetronic)
- 1.6L 16v - TU5J4 TU5JP4
- 1.9L 8v - XU9JA
- 1.9L 16v - XU9J4
- 2.0L 8v - XU10J2CTE
- 2.0L 16v - EW10J4S
- 2.0L 16v - XU10J4
- 2.0L 16v - XU10J4RS
- 2.0L 16v - XU10J4RS-K
- 2.0L 16v - XU10J4TE
- 3.0L 24v - ES9J4S
- TALBOT Samba 1.4 8V 72hp XY8 1981-1986
- TALBOT Samba Rallye 79cv XY8 1983-1986
Sort by:
Filter By
2.0L 16v - XU10J4TE
Turbocharging is what sets the XU10J4TE apart from the naturally aspirated 2.0 16-valve: boost pressure raises cylinder loads long before it raises the rev limit, and the bottom end has to answer for…Turbocharging is what sets the XU10J4TE apart from the naturally aspirated 2.0 16-valve: boost pressure raises cylinder loads long before it raises the rev limit, and the bottom end has to answer for it. Two active references are listed, and that is the honest measure of this page. The WOSSNER forged pistons are the ones made for the XU10J4TE, forged so that the crown and the ring lands hold under sustained boost. They are backed by trimetal big end bearings covering the PSA XU9 and XU10 family, the layer that takes the extra pressure at every combustion cycle. Cylinder head, gasket and fastener references sit on the other XU10 engine pages.