Gasket Cylinder head reinforced PSA Xsara VTS ZX 306 S16 XU10J4RS

We offer you here several reinforced Cylinder head Gaskets for XU10J4RS engine from Brand COMETICthe technical characteristics of which you will find below.

Technical characteristics of the OEM Gasket

• Motor bore: 86mm
• Thickness: 1.10mm

Features techniques

• Motor bore: up to 86.5mm orup to 88mm
  
• Gasket Type: MLS
• Number of sheets: 4 then 5 for Gaskets from 1.52mm thick
• Thickness(es) to choose from: 0.69, 0.76, 0.91, 1.02, 1.14, 1.30, 1.42, 1.52, 1.68, 1.78, 1.91, 2.03, 2.13, 2.18, 2.34, 2.49, 3.05, 3.56mm
• References: C4520, C4520-027,C4520-030, C4520-036, C4520-040, C4520-045, C4520-051, C4520-056, C4520-060, C4520-066, C4520-070, C4520-075, C4520-080, C4520-084, C4520-086, C4520-092, C4520-098, C4520-120, C4520-140, C4521,C4521-027,C4521-030, C4521-036, C4521-040, C4521-045, C4521-051, C4521-056, C4521-060, C4521-066, C4521-070, C4521-075, C4521-080, C4521-084, C4521-086, C4521-092, C4521-098, C4521-120, C4521-140
  

Founded by Bob Gorman in 1989, Brand Cometic is recognized worldwide as a leader in the design and manufacturing of reinforced cylinder head gaskets. These latter, like all of the Brand's Products, are made in the United States. The Cometic reinforced Cylinder head Gaskets consist of several stamped stainless steel sheets held together by rivets. There are three types of Cometic Cylinder head Gaskets:

This technology requires less tightening of the cylinder head screws, thus reducing bore distortion and obtaining better load distribution across the entire gasket.

• MLS:Equivalent to MLS Athena Gaskets, these multi-layer Gaskets (between 3 and 5 stainless steel sheets depending on the thickness of the Gasket) have stampings around the cylinders and fluid passages.

• MLX:This Gasket has an identical base to the MLS Gasket but a reinforcement (folded sheet) at the level of the cylinders and a special high temperature Coating are added.

• HP:This is a Gasket MLX on whichan extra layer was addedwhose aim is to reinforce the sealing of the cylinders (see below)