Skip to content
  • On order
Reinforced head gasket Honda K20Z3 2.0 - C4561 Reinforced head gasket Honda K20Z3 2.0 - C4561

Reinforced head gasket Honda Civic VIII Acura CSX 2.0 K20Z3

€113.59 (tax incl.)
€151.45 (tax incl.) -25%

Reinforced Cometic head gasket in MLS. One gasket per engine: choose the bore and thickness you want.

  • Brand: Cometic
  • Engine: 2.0 L K20Z3
  • Bore: 86 mm or 87 mm
  • Thickness: 0.69 to 3.56 mm
  • Replaces: 12251-RAC-003 ; 12251-RAC-004 ; 12251-RBB-004 ; 12251-RBC-004
C4561-027
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Honda engines covered

The K20Z3 is a 2.0 litre (1998 cc) petrol engine with four in-line cylinders and 16 valves. It powers the Acura CSX and the Honda Civic VIII (FD, FA) saloon listed below.

The original gaskets carry the part numbers 12251-RAC-003, 12251-RAC-004, 12251-RBB-004 and 12251-RBC-004. Honda publishes neither their bore, their thickness nor their construction. This in-line four takes a single head gasket. Meant for the standard combustion pressure, it gives out once that pressure rises: the head loses clamping load, lifts and coolant reaches a cylinder.

Reinforced cylinder head gaskets

Sealing does not depend on the gasket alone but also on the fasteners that press the head onto the block. A composite gasket settles for good beyond 100 N/mm²; the 301 stainless steel of MLS gaskets takes 517 N/mm², 5 times more, and recovers its shape at every combustion.

This page brings together 36 part numbers from Cometic, the American competition gasket maker, for a single construction: MLS, a multilayer steel design. Eighteen gaskets (C4561) have an 86 mm bore and eighteen (C4562) an 87 mm bore; thicknesses run from 0.69 to 3.56 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
OEM 12251-RAC-003 ; 12251-RAC-004 ; 12251-RBB-004 ; 12251-RBC-004
86 mm 0.69 mm 4.01 MLS Cometic C4561-027
86 mm 0.76 mm 4.41 MLS Cometic C4561-030
86 mm 0.91 mm 5.29 MLS Cometic C4561-036
86 mm 1.02 mm 5.92 MLS Cometic C4561-040
86 mm 1.14 mm 6.62 MLS Cometic C4561-045
86 mm 1.30 mm 7.55 MLS Cometic C4561-051
86 mm 1.42 mm 8.25 MLS Cometic C4561-056
86 mm 1.52 mm 8.83 MLS Cometic C4561-060
86 mm 1.68 mm 9.76 MLS Cometic C4561-066
86 mm 1.78 mm 10.34 MLS Cometic C4561-070
86 mm 1.91 mm 11.09 MLS Cometic C4561-075
86 mm 2.03 mm 11.79 MLS Cometic C4561-080
86 mm 2.13 mm 12.37 MLS Cometic C4561-084
86 mm 2.18 mm 12.66 MLS Cometic C4561-086
86 mm 2.34 mm 13.59 MLS Cometic C4561-092
86 mm 2.49 mm 14.46 MLS Cometic C4561-098
86 mm 3.05 mm 17.72 MLS Cometic C4561-120
86 mm 3.56 mm 20.68 MLS Cometic C4561-140
87 mm 0.69 mm 4.10 MLS Cometic C4562-027
87 mm 0.76 mm 4.52 MLS Cometic C4562-030
87 mm 0.91 mm 5.41 MLS Cometic C4562-036
87 mm 1.02 mm 6.06 MLS Cometic C4562-040
87 mm 1.14 mm 6.78 MLS Cometic C4562-045
87 mm 1.30 mm 7.73 MLS Cometic C4562-051
87 mm 1.42 mm 8.44 MLS Cometic C4562-056
87 mm 1.52 mm 9.04 MLS Cometic C4562-060
87 mm 1.68 mm 9.99 MLS Cometic C4562-066
87 mm 1.78 mm 10.58 MLS Cometic C4562-070
87 mm 1.91 mm 11.35 MLS Cometic C4562-075
87 mm 2.03 mm 12.07 MLS Cometic C4562-080
87 mm 2.13 mm 12.66 MLS Cometic C4562-084
87 mm 2.18 mm 12.96 MLS Cometic C4562-086
87 mm 2.34 mm 13.91 MLS Cometic C4562-092
87 mm 2.49 mm 14.80 MLS Cometic C4562-098
87 mm 3.05 mm 18.13 MLS Cometic C4562-120
87 mm 3.56 mm 21.16 MLS Cometic C4562-140

The volume of a gasket is the free space it leaves above each cylinder; it adds to the combustion chamber and reduces the compression ratio. Compare it only at equal bore, here 86 mm for the C4561 and 87 mm for the C4562.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts K20Z3 not published by the manufacturer

Before fitting, check the flatness of the head and the block with a straight edge and have them resurfaced if necessary. Cometic supplies these gaskets already coated: apply no sealant.

Technical guide

The construction offered

Cometic MLS cylinder head gasket Cometic MLS
Several stainless steel sheets, embossed and assembled by rivets. The outer sheets show active beads that surround each cylinder and each fluid passage. Moderate clamping is enough to seal and the bore distorts little: a versatile construction, from the tuned naturally aspirated engine to moderate boost.

Choosing bore and thickness

Gasket bore. The Cometic MLS is offered in 86 mm (C4561) and in 87 mm (C4562).

Thickness. No thickness is published for the original gaskets 12251-RAC-003, 12251-RAC-004, 12251-RBB-004 and 12251-RBC-004. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published: take the dimension of the removed gasket and pick the offered value that comes closest
Skimmed cylinder head, make up the lost height The offered value closest to the dimension of the removed gasket, plus the metal taken off at resurfacing
Forced induction build, lower the ratio A thickness above the dimension of the removed gasket
Naturally aspirated build, raise the ratio A thickness below the dimension of the removed gasket, down to 0.69 mm, the lowest value offered

If you go below the original thickness, first read with a dial gauge the height the pistons stand proud of the block's gasket face: that figure sets the clearance that remains between piston and head.

The brand

Cometic Cometic Gasket, Inc. is an American company founded in 1989 in Concord, Ohio, that designs and produces engine gaskets and sealing elements. It is known for the custom gasket, cut to the bore and thickness requested, made in the United States from American raw materials.

Advantages over the original gasket

Criterion Original gaskets (four part numbers) Reinforced gaskets
Construction Construction not stated by the manufacturer Multilayer stainless steel (MLS)
Gasket bore not published 86 mm and 87 mm
Thicknesses available thickness not provided by the manufacturer 0.69 to 3.56 mm, 18 values per bore
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the 86 mm and 87 mm bores of these gaskets covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
Acura CSX Berline tricorps 2.0 K20Z3 200 hp 2006-2010
Honda Civic VIII Berline tricorps (FD, FA) 2.0 K20Z3 192 hp 2008-2011
Honda Civic VIII Berline tricorps (FD, FA) 2.0 (FD2) K20Z3 200 hp 2007-2011

OEM part number: 12251-RAC-003, 12251-RAC-004, 12251-RBB-004 and 12251-RBC-004.

Important: the part numbers on this page suit only the K20Z3 engine: check your vehicle's engine code before ordering.

Why switch to a reinforced gasket?

The reinforced gasket relays the original one when that has reached its limit: under stronger combustion pressure it keeps its shape instead of settling.

When the engine is built up further, with livelier camshafts, a raised compression ratio or added boost, the head gasket gives way before the rest of the top end. A reinforced gasket avoids the leak, then the head removal, which costs far more than the part.

16 other products in the same category

Viewed products

Loading...