Skip to content
  • In stock
Reinforced head gasket Mazda L3-VDT - C4481-027 Reinforced head gasket Mazda L3-VDT - C4481-027

Reinforced head gasket Mazda 2.3 Turbo L3-VDT

€119.31 (tax incl.)
€159.08 (tax incl.) -25%

Reinforced Cometic head gasket, in multi-layer MLS or MLX. Sold individually, one gasket per engine.

  • Engine : Mazda 2.3 L turbo L3-VDT
  • Bore : 88 mm (MLS) and 89 mm (MLS and MLX)
  • Thickness : 0.69 to 3.56 mm in MLS, 0.71 mm in MLX
  • Replaces : L3K9-10-271B
C4481-027
5 in stock in Europe (72h lead time)
Pay in installments

The Mazda engines covered

The L3-VDT is a 2.3 litre turbocharged petrol engine. It powers the Mazda 3 (BK, BL) MPS, Mazda 6 (GG) and CX-7 models listed in the compatibility table below.

The original gasket carries part number L3K9-10-271B. Mazda publishes neither its bore, nor its thickness, nor its construction. The engine takes one cylinder head gasket, sized for the standard combustion pressure; when that pressure climbs, the clamping force eases, the head lifts slightly and coolant seeps into a cylinder.

Reinforced cylinder head gaskets

Sealing does not rest on the gasket alone but also on the fasteners that press the head onto the block. Beyond 100 N/mm², a composite gasket compresses for good; the 301 stainless steel of MLS gaskets takes 517 N/mm², 5 times more, and recovers its shape at every combustion. Also inspect the head bolts: replace any bolt that is stretched or damaged.

This page brings together 20 Cometic part numbers, from the American maker of competition gaskets, with an 89 mm bore for 19 of them and 88 mm for H2754SPD034S, in two constructions: MLS, multi-layer steel, with 18 C4481 part numbers from 0.69 to 3.56 mm in 89 mm and H2754SPD034S in 0.86 mm in 88 mm, and MLX, with a chamber stopper, with part number C4970-028 in 0.71 mm. The engine takes only one gasket: order a single part number.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
OEM L3K9-10-271B
88 mm 0.86 mm 5.23 MLS Cometic H2754SPD034S
89 mm 0.69 mm 4.29 MLS Cometic C4481-027
89 mm 0.71 mm 4.42 MLX Cometic C4970-028
89 mm 0.76 mm 4.73 MLS Cometic C4481-030
89 mm 0.91 mm 5.66 MLS Cometic C4481-036
89 mm 1.02 mm 6.35 MLS Cometic C4481-040
89 mm 1.14 mm 7.09 MLS Cometic C4481-045
89 mm 1.30 mm 8.09 MLS Cometic C4481-051
89 mm 1.42 mm 8.83 MLS Cometic C4481-056
89 mm 1.52 mm 9.46 MLS Cometic C4481-060
89 mm 1.68 mm 10.45 MLS Cometic C4481-066
89 mm 1.78 mm 11.07 MLS Cometic C4481-070
89 mm 1.91 mm 11.88 MLS Cometic C4481-075
89 mm 2.03 mm 12.63 MLS Cometic C4481-080
89 mm 2.13 mm 13.25 MLS Cometic C4481-084
89 mm 2.18 mm 13.56 MLS Cometic C4481-086
89 mm 2.34 mm 14.56 MLS Cometic C4481-092
89 mm 2.49 mm 15.49 MLS Cometic C4481-098
89 mm 3.05 mm 18.97 MLS Cometic C4481-120
89 mm 3.56 mm 22.15 MLS Cometic C4481-140

A gasket's volume is the free space it leaves above each cylinder; it adds to the combustion chamber and lowers the compression ratio. The 20 part numbers on this page have an 89 mm bore, except H2754SPD034S at 88 mm, so only those of the same bore can be compared directly.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts
L3K9-10-135A
L3-VDT 3 to 11 Nm, then 13 to 17 Nm, then 43 to 47 Nm, then twice +88 to 92°

Before reassembly, check the flatness of the head and block mating faces with a straightedge and have them resurfaced if needed. Cometic gaskets arrive already coated: do not apply any sealing paste. Remember to clean the gasket faces carefully before assembly.

Technical guide

The two constructions offered

Cometic MLS cylinder head gasket Cometic MLS
Several stainless steel sheets, stamped and riveted together. Each outer sheet carries active beads tracing the outline of every cylinder and fluid passage. A moderate clamping load is enough to seal, and the bore distorts very little. This versatile gasket suits anything from a tuned naturally aspirated engine to light boost. The C4481 part numbers on this page are offered in this construction.
Cometic MLX cylinder head gasket Cometic MLX
The same base as the MLS, with a folded centre sheet forming a stopper around each combustion chamber. The stopper concentrates the clamping force around the bore and limits how far the gasket is crushed. It is designed for boosted engines and high combustion pressures. Part number C4970-028 on this page is offered in this construction.

Choosing bore and thickness

Gasket bore. The Cometic MLS (C4481) and the Cometic MLX (C4970-028) are both offered here in 89 mm, and H2754SPD034S in 88 mm.

Thickness. No thickness is published for the original gasket L3K9-10-271B. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published: measure the removed gasket and pick the offered value closest to your measurement
Skimmed cylinder head, make up the lost height The offered value closest to the measured thickness of the removed gasket, plus the material removed during resurfacing
Forced induction build, lower the ratio A thickness greater than that of the removed gasket
Naturally aspirated build, raise the ratio A thickness below that of the removed gasket, down to 0.69 mm, the minimum value offered

Before opting for a thickness below the original, measure with a dial gauge how far the pistons protrude above the block deck: it shows the clearance remaining between piston and head.

The brand

Cometic Cometic Gasket, Inc. is an American company founded in 1989 and based in Concord, Ohio, which designs and builds gaskets and sealing parts for engines. It earned its name with made-to-measure gaskets, cut to the bore and thickness required, all made in the United States from American materials. Its part numbers for this Mazda engine are offered here in 89 mm and 88 mm.

Advantages over the original gasket

Criterion Original gasket L3K9-10-271B Reinforced gaskets
Construction Construction not stated by the manufacturer Multi-layer stainless steel (MLS, MLX)
Gasket bore not published 89 mm (MLS and MLX), 88 mm (MLS H2754SPD034S)
Thicknesses available not published by the manufacturer 0.69 to 3.56 mm in 89 mm MLS (18 values), 0.86 mm in 88 mm MLS, 0.71 mm in MLX
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the largest bore of these gaskets, 89 mm covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
MAZDA (FAW) CX-7 2.3 T AWD L3-VDT 238 hp 2014-2017
MAZDA 3 (BK) 2.3 (BK3P) L3-VDT 264 hp 2006-2009
MAZDA 3 (BK) 2.3 MPS L3-VDT 267 hp 2007-2009
MAZDA 3 (BK) 2.3 MPS Turbo (BK14) L3-VDT 260 hp 2006-2009
MAZDA 3 (BL) 2.3 MPS Turbo L3-VDT 267 hp 2009-2014
MAZDA 3 (BL) 2.3 MPS Turbo (BL14) L3-VDT 260 hp 2008-2014
MAZDA 3 (BL) 2.3 MPS Turbo (BL3FW, BL1031) L3-VDT 264 hp 2009-2013
MAZDA 3 Berline tricorps (BK) 2.3 MPS L3-VDT 260 hp 2004-2009
MAZDA 6 Berline tricorps (GG) 2.3 AWD L3-VDT 277 hp 2005-2006
MAZDA 6 Berline tricorps (GG) 2.3 AWD (GG3P) L3-VDT 272 hp 2005-
MAZDA 6 Berline tricorps (GG) 2.3 MPS Turbo (GG3P) L3-VDT 260 hp 2005-2007
MAZDA CX-7 (ER) 2.3 L3-VDT 248 hp 2006-2012
MAZDA CX-7 (ER) 2.3 AWD L3-VDT 248 hp 2006-2012
MAZDA CX-7 (ER) 2.3 MZR DISI Turbo (ER3P) L3-VDT 238 hp 2007-2013

OEM part number: L3K9-10-271B.

Important: the part numbers on this page suit only the L3-VDT engine: check your Mazda's engine code before ordering.

Why switch to a reinforced gasket?

When the original gasket is no longer enough, the reinforced gasket replaces it: under higher combustion pressure it keeps its shape instead of collapsing. For the Mazda on this page, it is the answer as soon as the engine goes beyond its original output.

Whether you add a turbo, raise the compression ratio or rev higher with livelier cams, the cylinder head gasket becomes the weak link of a high-output engine. A reinforced gasket prevents the leak and the head removal that goes with it, far costlier than the gasket. On this turbocharged engine, the reinforced gasket is the first item to address once you go beyond the original output.

16 other products in the same category

Viewed products

Loading...