Skip to content
  • On order
Reinforced head gasket Nissan FJ20E FJ20ET - C4326-027 Reinforced head gasket Nissan FJ20E FJ20ET - C4326-027 Reinforced head gasket Nissan FJ20E FJ20ET - C4326-027 Reinforced head gasket Nissan FJ20E FJ20ET - C4326-027

Reinforced cylinder head gasket Nissan FJ20E FJ20ET 2.0L

€127.79 (tax incl.)
€170.39 (tax incl.) -25%

Reinforced Cometic head gasket in multilayer MLS for the Nissan 2.0-litre 16-valve engine.

  • Engine: FJ20E FJ20ET
  • Bores: 90 and 91 mm
  • Thicknesses: 0.69 to 3.56 mm
C4326-027
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Nissan engines covered

The 2.0-litre 16-valve Nissan FJ20E petrol engine is fitted to the Silvia S12 in the version detailed below; the Cometic part numbers on this page are announced by the maker for the FJ20E and FJ20ET.

Nissan publishes neither the part number of the original gasket of these engines, nor its bore, nor its thickness, nor its construction. That gasket is built for standard pressure: when pressure rises, the clamping load relaxes, the head lifts off the block and coolant escapes into a cylinder.

Reinforced cylinder head gaskets

The head gasket does not seal on its own: the fasteners that press the head onto the block count as much as it does. Above 100 N/mm², a composite gasket settles for good; the 301 stainless steel of MLS gaskets withstands up to 517 N/mm², 5 times more, and recovers its shape at every combustion.

This page gathers the part numbers of Cometic, an American maker of competition gaskets, under a single construction: MLS, a multi-layer steel design. The gaskets exist in 90 mm and 91 mm bores, and in thicknesses from 0.69 to 3.56 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
90 mm 0.69 mm 4.39 MLS Cometic C4326-027
90 mm 0.76 mm 4.83 MLS Cometic C4326-030
90 mm 0.91 mm 5.79 MLS Cometic C4326-036
90 mm 1.02 mm 6.49 MLS Cometic C4326-040
90 mm 1.14 mm 7.25 MLS Cometic C4326-045
90 mm 1.30 mm 8.27 MLS Cometic C4326-051
90 mm 1.42 mm 9.03 MLS Cometic C4326-056
90 mm 1.52 mm 9.67 MLS Cometic C4326-060
90 mm 1.68 mm 10.69 MLS Cometic C4326-066
90 mm 1.78 mm 11.32 MLS Cometic C4326-070
90 mm 1.91 mm 12.15 MLS Cometic C4326-075
90 mm 2.03 mm 12.91 MLS Cometic C4326-080
90 mm 2.13 mm 13.55 MLS Cometic C4326-084
90 mm 2.18 mm 13.87 MLS Cometic C4326-086
90 mm 2.34 mm 14.89 MLS Cometic C4326-092
90 mm 2.49 mm 15.84 MLS Cometic C4326-098
90 mm 3.05 mm 19.40 MLS Cometic C4326-120
90 mm 3.56 mm 22.65 MLS Cometic C4326-140
91 mm 0.69 mm 4.49 MLS Cometic C4327-027
91 mm 0.76 mm 4.94 MLS Cometic C4327-030
91 mm 0.91 mm 5.92 MLS Cometic C4327-036
91 mm 1.02 mm 6.63 MLS Cometic C4327-040
91 mm 1.14 mm 7.41 MLS Cometic C4327-045
91 mm 1.30 mm 8.46 MLS Cometic C4327-051
91 mm 1.42 mm 9.24 MLS Cometic C4327-056
91 mm 1.52 mm 9.89 MLS Cometic C4327-060
91 mm 1.68 mm 10.93 MLS Cometic C4327-066
91 mm 1.78 mm 11.58 MLS Cometic C4327-070
91 mm 1.91 mm 12.42 MLS Cometic C4327-075
91 mm 2.03 mm 13.20 MLS Cometic C4327-080
91 mm 2.13 mm 13.85 MLS Cometic C4327-084
91 mm 2.18 mm 14.18 MLS Cometic C4327-086
91 mm 2.34 mm 15.22 MLS Cometic C4327-092
91 mm 2.49 mm 16.19 MLS Cometic C4327-098
91 mm 3.05 mm 19.84 MLS Cometic C4327-120
91 mm 3.56 mm 23.15 MLS Cometic C4327-140

The gasket volume is the empty space it leaves above each cylinder. It is added to the combustion chamber and reduces the compression ratio, the more so as it is large. Compare these values only between gaskets of the same bore.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts FJ20E, FJ20ET not published by the manufacturer

Before fitting, check with a straight edge that the head and block faces are flat, and have any that need it resurfaced. Apply no gasket sealant: Cometic gaskets come already coated.

Technical guide

The construction offered

Cometic MLS cylinder head gasket MLS Cometic
Stainless steel layers, stamped and joined by rivets. The outer layers carry active beads around each cylinder and each fluid passage. Moderate tightening is enough to seal and the bore distorts very little. This versatile construction ranges from the prepared naturally aspirated engine to moderate boost.

Choosing bore and thickness

Gasket bore. Cometic MLS comes in 90 mm (C4326) and in 91 mm (C4327).

Thickness. Nissan discloses no thickness for the original gasket of this engine. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness unknown: measure the removed gasket and keep the nearest value offered
Skimmed cylinder head, make up the lost height The offered value closest to the figure measured on the removed gasket, plus the thickness taken off when resurfacing
Forced induction build, lower the ratio A thickness above the one measured on the removed gasket
Naturally aspirated build, raise the ratio A thickness below that of the removed gasket, down to 0.69 mm, the lowest of the range

If you choose a thickness lower than the original, first measure with a dial gauge how far the pistons protrude above the block face: this figure gives the clearance that remains between piston and head.

The brand

Cometic Founded in 1989 in Concord, Ohio, Cometic Gasket, Inc. is an American company that designs gaskets and sealing solutions for engines. It became known for the made-to-measure gasket, cut to the bore and thickness required. All its manufacturing stays in the United States, using American materials.

Advantages over the original gasket

Criterion Original gasket: part number not published Reinforced gaskets
Construction Construction not stated by the manufacturer Multi-layer stainless steel (MLS)
Gasket bore not published 90 and 91 mm
Thicknesses available thickness not published by the manufacturer 0.69 to 3.56 mm, 18 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the bore of the original gasket, which Nissan does not disclose covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Brand Model Engine code Power Years
Nissan SILVIA (S12) 2.0 GP FJ20E 146 hp 1984-1988

OEM part number: part number not published by the manufacturer.

Important: the part numbers on this page match the Nissan FJ20E and FJ20ET engines: read the engine code of your vehicle, then check the bore, before you order.

Why switch to a reinforced gasket?

When the original gasket is no longer enough, the reinforced gasket takes over: under higher combustion pressure it holds its shape and does not get crushed.

As soon as a turbo, a supercharger or a higher compression ratio comes into play, the head takes more load and the gasket becomes the most exposed part of the top end. A reinforced gasket stops gas or coolant leaks, and the head removal that would follow.

16 other products in the same category

Viewed products

Loading...