- On order
Reinforced head gasket Subaru Forester Impreza Legacy Outback 2.5 EJ25
Reinforced head gasket, Cometic in MLS or MLX. A flat engine has two cylinder heads: plan on two gaskets per engine.
- Brand: Cometic
- Engine: 2.5 L EJ25
- Bore: 100 mm, 101 mm or 102 mm
- Thickness: 0.81 to 1.42 mm
- Replaces: 11044-AA521, 11044-AA630 to 11044-AA633, 11044-AA471, 11044-AA610
The Subaru engines covered
The EJ25 petrol engine, a 2.5 litre (2,457 cc) flat-four, powers the Subaru Forester, Impreza, Legacy and Outback listed in the compatibility table below.
The original gasket carries, depending on the version, the part numbers 11044-AA521, 11044-AA630 to 11044-AA633 (EJ251 and EJ253) or 11044-AA471 and 11044-AA610 (EJ25D). Subaru publishes neither its bore, its thickness nor its construction. Designed for the standard combustion pressure, it reaches its limit as soon as that pressure rises: the clamping load fades, one head lifts slightly and coolant finds its way into a cylinder.
Reinforced cylinder head gaskets
Sealing does not rest on the head gasket alone: it also depends on the fasteners that clamp each head to the block. A composite gasket is permanently crushed beyond 100 N/mm²; the 301 stainless steel of the MLX and MLS withstands 517 N/mm², 5 times more, and recovers its shape at every combustion.
This page presents part numbers from the American maker Cometic, a specialist in competition gaskets, in two constructions: the MLS, in 100 mm bore (1.02, 1.30 or 1.42 mm thickness), 101 mm or 102 mm bore (1.02 mm thickness), and the MLX with a chamber stopper, in 101 mm bore and eight thicknesses from 0.81 to 1.30 mm. A flat engine has two cylinder heads, so two gaskets are needed.
Technical specifications
| Gasket bore | Thickness | Gasket volume | Gasket type OEM not specified OEM not specified |
Brand | Part number OEM 11044-AA521 ; 11044-AA630 à 11044-AA633 (EJ25 (EJ251, EJ252, EJ253)) OEM 11044-AA471 ; 11044-AA610 (EJ25 (EJ25D)) |
| 100 mm | 1.02 mm | 8.01 | MLS | Cometic | H1631SPK040S |
| 100 mm | 1.30 mm | 10.21 | MLS | Cometic | H1631SPK051S |
| 100 mm | 1.42 mm | 11.15 | MLS | Cometic | H1631SPK056S |
| 101 mm | 0.81 mm | 6.49 | MLX | Cometic | C4578-032 |
| 101 mm | 0.91 mm | 7.29 | MLX | Cometic | C4578-036 |
| 101 mm | 1.02 mm | 8.17 | MLS | Cometic | H1631SP6040SN |
| 101 mm | 1.02 mm | 8.17 | MLX | Cometic | C4578-040 |
| 101 mm | 1.07 mm | 8.57 | MLX | Cometic | C4578-042 |
| 101 mm | 1.12 mm | 8.97 | MLX | Cometic | C4578-044 |
| 101 mm | 1.22 mm | 9.77 | MLX | Cometic | C4578-048 |
| 101 mm | 1.27 mm | 10.18 | MLX | Cometic | C4578-050 |
| 101 mm | 1.30 mm | 10.42 | MLX | Cometic | C4578-051 |
| 102 mm | 1.02 mm | 8.33 | MLS | Cometic | H1631SP2040S |
A gasket's volume is the free space it leaves above each cylinder. Added to the combustion chamber, it lowers the compression ratio; only gaskets of the same bore can be compared directly. The 100 mm and 102 mm MLS do not share the bore of the 101 mm references, so compare their volume with care.
Preparation and fitting
| Fasteners | Engines | Tightening torque |
| Original cylinder head bolts 11095AA141 ; 11095AA123 |
EJ25 SOHC | 29 Nm then 69 Nm, loosen by 180° twice, bolts 1 and 2 at 34 Nm, bolts 3 to 6 at 15 Nm, then a further 80 to 90° twice |
Before fitting, run a straight edge over the gasket faces of each head and of the block, and have them resurfaced if needed. Cometic gaskets come coated: do not apply any sealant.
| ARP cylinder head studs Subaru EJ20 EJ22 EJ25 → |
Technical guide
The two constructions offered
![]() |
Cometic MLS Several embossed stainless steel sheets joined by rivets. The outer sheets carry beads that surround each cylinder and each fluid passage: moderate clamping is enough to seal and the bore distorts little. The construction suits a tuned naturally aspirated engine as well as moderate boost. |
![]() |
Cometic MLX The same base as the MLS, with a folded centre sheet forming a stopper around each combustion chamber. The stopper concentrates the clamping force around the bore and limits how far the gasket is crushed. It is designed for boosted engines and high combustion pressures. |
Choosing bore and thickness
Gasket bore. The Cometic MLS is offered here in 100 mm (H1631SPK040S, H1631SPK051S and H1631SPK056S), in 101 mm (H1631SP6040SN) and 102 mm (H1631SP2040S), the MLX in 101 mm (C4578), in eight thicknesses. According to the manufacturer's price list, the three 100 mm part numbers are intended for an EJ22 cylinder head fitted on an EJ25 block.
Thickness. Subaru publishes no thickness for the original gasket. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.
| Your goal | Thickness to choose |
| Keep the original compression ratio | Original thickness not published by the manufacturer: measure the removed gasket and bring it closer to one of the thicknesses offered, from 0.81 to 1.42 mm |
| Skimmed cylinder head, make up the lost height | Nine thicknesses exist, from 0.81 to 1.42 mm: compare them with that of the removed gasket, plus the metal taken off when resurfacing |
| Forced induction build, lower the ratio | 0.81, 0.91 or 1.02 mm, if the removed gasket is thinner |
| Naturally aspirated build, raise the ratio | 1.07 to 1.42 mm, if the removed gasket is thicker |
As no original thickness is published, use a dial gauge to measure how far each piston protrudes above the block's gasket face, especially if resurfacing is planned: this reading shows the clearance left between piston and head.
The brand
| Cometic Gasket, Inc. is an American company founded in 1989 in Concord, Ohio, that designs and makes engine gaskets and sealing parts. It built its name on custom gaskets cut to the bore and thickness required, all made in the United States from American raw materials. |
Advantages over the original gasket
| Criterion | Original gaskets 11044-AA521, 11044-AA630 to 11044-AA633, 11044-AA471 and 11044-AA610 | Reinforced gaskets |
| Construction | Construction not stated by the manufacturer | Multi-layer stainless steel (MLS, MLX) |
| Gasket bore | not published by the manufacturer | 100 mm (MLS), 101 mm (MLS and MLX) and 102 mm (MLS) |
| Thicknesses available | not published by the manufacturer | 0.81 to 1.42 mm, 9 values |
| Compression ratio adjustment | None | Through the thickness chosen |
| Resistance to overpressure | Limited to standard output | Designed for forced induction |
When a reinforced gasket becomes necessary
- Adding forced induction, or raising boost on an already turbocharged engine
- Cylinder rebored beyond what the 100 mm, 101 mm and 102 mm bores of the gaskets offered covers
- Looking for a compression ratio different from standard, higher or lower
- Engine that has already lost its gasket, or is consuming coolant
- Competition use, where the gasket goes through repeated temperature rises
Vehicle compatibility
| Model | Engine code | Power | Years |
| Subaru Forester (SG_, S11SG) 2.5 AWD (SG9) | EJ25 | 265 hp | 2002-2007 |
| Subaru Forester (SG_, S11SG) 2.5 RX Nato AWD (SG9) | EJ25 | 156 hp | 2002-2008 |
| Subaru Forester (SH_) 2.5 AWD (SH9) | EJ25 | 171 hp | 2009-2013 |
| Subaru Impreza Berline à hayon (GR, GH, G3) 2.5 AWD | EJ25 | 165 hp | 2007-2011 |
| Subaru Impreza Berline tricorps (GE, GV) 2.5 AWD | EJ25 | 165 hp | 2008-2010 |
| Subaru Impreza Break (GG) 2.5 AWD (GGE) | EJ25 | 152 hp | 2002-2005 |
| Subaru Legacy II (BD) 2.5 4WD (BD9) | EJ25 | 156 hp | 1996-1998 |
| Subaru Legacy II Break (BG) 2.5 4WD | EJ25 | 158 hp | 1995-1996 |
| Subaru Legacy III (BE) 2.5 AWD (BE9) | EJ25 | 156 hp | 1998-2003 |
| Subaru Legacy III (BE) 2.5 AWD (BE9) | EJ25 | 170 hp | 2001-2003 |
| Subaru Legacy III Break (BH9, BHC) 2.5 AWD | EJ25 | 170 hp | 2001-2003 |
| Subaru Legacy III Break (BH) 2.5 AWD (BH9) | EJ25 | 156 hp | 1998-2003 |
| Subaru Legacy IV (BL) 2.5 AWD (BL9) | EJ25 | 165 hp | 2003-2009 |
| Subaru Legacy IV (BL) 2.5 AWD (BL9) | EJ25 | 177 hp | 2003-2009 |
| Subaru Legacy IV (BL) 2.5 i AWD (BL9) | EJ25 | 173 hp | 2007-2009 |
| Subaru Legacy IV Break (BP) 2.5 AWD (BP9) | EJ25 | 165 hp | 2003-2009 |
| Subaru Legacy IV Break (BP) 2.5 AWD (BP9) | EJ25 | 177 hp | 2003-2009 |
| Subaru Legacy IV Break (BP) 2.5 AWD (BPH) | EJ25 | 265 hp | 2003-2009 |
| Subaru Legacy IV Break (BP) 2.5 i AWD (BP9) | EJ25 | 173 hp | 2008-2008 |
| Subaru Legacy V Break (BR) 2.5 i AWD (BR9) | EJ25 | 170 hp | 2009-2014 |
| Subaru Outback (BH) 2.5 AWD (BH9) | EJ25 | 156 hp | 2000-2003 |
| Subaru Outback (BR) 2.5 i AWD | EJ25 | 170 hp | 2009-2014 |
| Subaru Outback (BP) 2.5 AWD (BP9) | EJ253 | 165 and 167 hp | 2003-2009 |
| Subaru Impreza Berline tricorps (GD) 2.5 AWD (GDE) | EJ251 | 177 hp | 2001-2005 |
| Subaru Forester (SG_, S11SG) 2.5 AWD | EJ253 | 175 hp | 2005-2012 |
| Subaru Impreza Berline tricorps (GD) 2.5 i AWD (GDE) | EJ251 | 152 hp | 2002-2005 |
| Subaru Forester (SG_, S11SG) 2.5 AWD (SG9) | EJ253 | 165 hp | 2005-2008 |
| Subaru Outback (BP) 2.5 AWD (BP9) | EJ251/EJ253 | 173 hp | 2008-2009 |
| Subaru Outback (BR) 2.5 i AWD (BR9) | EJ253 | 167 and 173 hp | 2009- |
| Subaru Legacy V (BM) 2.5 i AWD (BM9) | EJ253 | 167 and 170 hp | 2009-2014 |
| Subaru Legacy V Break (BR) 2.5 i AWD (BR9) | EJ253 | 167 hp | 2009-2014 |
| Subaru Baja Pick-up 2.5 AWD | EJ253 | 167 hp | 2002-2006 |
| Subaru Impreza Coupé (GFC) 2.5 AWD | EJ253 | 167 hp | 1998-1999 |
| Subaru Impreza Berline tricorps (GD) 2.5 AWD | EJ253 | 167 hp | 2000-2007 |
| Subaru Outback (BH) 2.5 AWD | EJ253 | 167 hp | 1999-2003 |
| Subaru Impreza Berline tricorps (GE, GV) 2.5 AWD | EJ253 | 167 hp | 2008-2011 |
| Subaru Impreza Break 2.5 i AWD | EJ253 | 167 hp | 2007-2011 |
| Subaru Forester (SH_) 2.5 AWD | EJ253 | 167 hp | 2008-2010 |
| Subaru Legacy III (BE) 2.5 AWD | EJ253 | 167 hp | 1999-2003 |
| Subaru Legacy III Break (BH) 2.5 AWD | EJ253 | 167 hp | 1999-2003 |
| Subaru Legacy IV Break (BP) 2.5 AWD | EJ253 | 167 hp | 2007-2008 |
| Subaru Impreza Berline à hayon (GR, GH, G3) 2.5 AWD | EJ253 | 170 and 173 hp | 2010-2011 |
| Subaru Forester (SG_, S11SG) 2.5 AWD (SG9) | EJ251 | 152 hp | 2002-2005 |
| Subaru Impreza Break (GG) 2.5 AWD | EJ253 | 167 hp | 2001-2007 |
| Subaru Exiga (YA_) 2.5 AWD (YA9) | EJ253 | 170 hp | 2009- |
| Subaru Outback (BP) 2.5 AWD | EJ251 | 155 hp | 2003-2010 |
| Subaru Forester (SG_, S11SG) 2.5 AWD | EJ251 | 167 hp | 2003-2004 |
| Subaru Outback (BR) 2.5 i AWD | EJ253 | 175 hp | 2012-2014 |
| Subaru Legacy V (BM) 2.5 i AWD | EJ253 | 175 hp | 2010-2014 |
| Subaru Outback (BR) 2.5 BiFuel AWD | EJ253 | 167 hp | 2010-2014 |
OEM part number: 11044-AA521, 11044-AA630 to 11044-AA633, 11044-AA471 and 11044-AA610.
Important: the part numbers on this page suit only the EJ25 engine: check your vehicle's engine code before ordering.
Why switch to a reinforced gasket?
Where the original gasket reaches its limit, the reinforced gasket keeps holding: under higher combustion pressure it keeps its shape and does not flatten.
As soon as power goes up, through a turbo, a supercharger or a raised compression ratio, the head gasket is the first part to give way in the top end. On a flat engine with two cylinder heads, a leak means removing the head concerned: a reinforced gasket spares you that job.
-
Brand
-
ReferenceH1631SP2040S

