Categories
Manufacturers
Categories
Reinforced sintered metal clutch disc with 4 damped pads, SAFFA, for FIAT Coup?, 2.0 16V engine from 1995 to 2001Technical Information:Diameter: 215mmNumber of splines: 20 Disc compatible with original mechanism but note your original mechanism will wear out faster than a replacement mechanism reinforced.
Reinforced sintered metal rigid clutch disc with 3 pads by SAFFA for FIAT Cinquecento Sporting, 1.1 engine from 1991 to 1998Technical Information:Diameter: 180mmNumber of splines: 20 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a replacement mechanism reinforced.
Reinforced sintered metal clutch disc with 4 damped pads, SAFFA, for CITROEN C2 VTR, 1.6 16V engine from 2003 to 2009Technical Information:Diameter: 200mmNumber of splines: 18 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
Reinforced sintered metal clutch disc with 4 damped pads by SAFFA for CITROEN Saxo all models (Except VTS) from 1996 to 2003Technical Information:Diameter: 200mmNumber of splines: 21 Disc compatible with original mechanism but note your original mechanism will wear out faster than a replacement mechanism reinforced.
SAFFA 3-pad sintered metal reinforced clutch disc for CITROEN AX, 1.4 GT engine from 1986 to 1999Technical Information:Diameter: 180mmNumber of splines: 18 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA reinforced clutch mechanism for ALFA ROMEO 146, 1.7 16V Boxer type engine from 1995 to 2001For 200 diameter discThe reinforced mechanisms have the same dimensions and tolerances than the series, but with increased plate pressure, as well as reinforced damping tabs. Non-contractual photo
Reinforced rigid sintered metal clutch disc 4 SAFFA pads for ALFA ROMEO 75 TD from 1985 to 1993
AUDI 80/100 1.4/1.6/1.8/2.0 AWD/S2/2.2/2.3 Disc clutch metal sintered reinforced SACHS PERFORMANCE
SAFFA reinforced clutch mechanism, reference EMB-FR225RTechnical Information:- Diameter: 220mmImage for illustrative purposes only
SAFFA reinforced clutch mechanism, reference EMB-FN363RTechnical Information:- Diameter: 200mmImage for illustrative purposes only
SAFFA Reinforced Clutch Mechanism, Reference EMB-FN358RTechnical Information:- Diameter: 215mmImage for illustrative purposes only
SAFFA Reinforced Clutch Disc, Reference EMB-2806Technical Information:- Diameter: 228mm- Disc: Rigid- Pads: 5 sintered metal pads- Hub: 22.3X20.2XEV- Splines: 28
SAFFA Reinforced Clutch Disc, Reference EMB-2609Technical Information:- Diameter: 228mm- Disc: Rigid- Pads: 5 sintered metal pads- Hub: 21X18XEV- Splines: 24
SAFFA reinforced clutch disc, reference EMB-6103Technical Information:- Diameter: 210mm- Disc: rigid- Pads: 4 sintered metal pads- Hub: 24.1X21.8XEV- Splines: 23 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA Reinforced Clutch Disc, Reference EMB-2822Technical Information:- Diameter: 210mm- Disc: Rigid- Pads: 4 sintered metal pads- Hub: 21X18XEV- Splines: 24
SAFFA Reinforced Clutch Disc, reference EMB-2589Technical Information:- Diameter: 200mm- Disc: Rigid- Pads: 4 sintered metal pads- Hub: 21X18XSP- Splines: 18
SAFFA Reinforced Clutch Disc, Reference EMB-2510Technical Information:- Diameter: 200mm- Disc: Rigid- Pads: 4 sintered metal pads- Hub: 23X20XEV- Splines: 20
SAFFA reinforced clutch disc, reference EMB-2219Technical Information:- Diameter: 215mm- Disc: rigid- Pads: 4 sintered metal pads- Hub: 23X20XEV- Splines: 20 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA Reinforced Clutch Disc, Reference EMB-6125Technical Information:- Diameter: 240mm- Disc: Damped- Pads: 6 sintered metal pads- Hub: 29x23x4- Splines: 10
SAFFA Reinforced Clutch Disc, Reference EMB-2613Technical Information:- Diameter: 241mm- Disc: Damped- Pads: 6 sintered metal pads- Hub: 25.5X23XEV- Splines: 24
SAFFA Reinforced Clutch Disc, Reference EMB-2618Technical Information:- Diameter: 215mm- Disc: Damped- Pads: 4 sintered metal pads- Hub: 21X18XEV- Splines: 18
SAFFA Reinforced Clutch Disc, Reference EMB-2592Technical Information:- Diameter: 200mm- Disc: Damped- Pads: 4 sintered metal pads- Hub: 23X20XEV- Splines: 20
OMP Steel Upper Rear Strut Brace for Honda Civic 1.6 16V -91Strut braces stiffen the chassis and maintain proper suspension geometry, thus improving the car's handling.Image for illustrative purposes only
45A silicone elbow, REDOX, 127mm inner diameter, 150x150mm length
POWERFLEX PERFORMANCE 2-part Rear Anti-Roll Bar Bushing kit (16mm) for BMW E36 CompactThe "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part 6 (see below):
Powerflex Performance Anti-R Hard Bushing kit (2-Pack) for BMW E36 Compact Wheel SideThe "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Reference 3 (see below):
POWERFLEX PERFORMANCE 26mm Front Anti-Roll Bar Bushing kit (2 Bushings) for BMW E36 CompactThe "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Reference 2 (see below):
Powerflex Performance Rear Shock Absorber Top Mount kit with 2 Hard Bushings and 12mm Rods for BMW E36The "Performance" range from market leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Reference 30 (see below):
POWERFLEX PERFORMANCE 2-part Hard Bushing kit Rear Axle/Differential Mounts for BMW E36The "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part 26 (see below):
POWERFLEX PERFORMANCE Hard Bushings Front Axle/Rear Differential Mount for BMW E36 M3 EVONot compatible with other BMW E36 modelsThe "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part 25 (see below):
Powerflex Performance Anti-R Rear Wheel Side Hard Bushing kit (2 Bushings) for BMW E36The "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part Number 15 (see below):
POWERFLEX PERFORMANCE 2-part Hard Anti-Roll Bar Bushing kit for 25mm Front for BMW E36The "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Reference 2 (see below):
POWERFLEX BLACK SERIES Hard Bushings Front Axle/Rear Differential Mount for BMW E36 The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Part 25 (see below): This kit corresponds to Part 7 (see...
Powerflex Black Series 2 Hard Anti-R Rear Inner Bushing kit for BMW E36The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Part Number 16 (see below):
Powerflex Black Series Anti-R Rear Wheel Side Hard Bushing kit (2 Bushings) for BMW E36The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Part Number 15 (see below):
POWERFLEX BLACK SERIES 2-part Rear Anti-Roll Bar Bushing kit (19mm) for BMW E36The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Reference 5 (see below):
kit 4 hard silent blocks POWERFLEX PERFORMANCE Ext+Int rear arm for BMW E30
kit of 2 POWERFLEX PERFORMANCE hard anti-roll wheel bushings for BMW E30
POWERFLEX PERFORMANCE 24mm Front Anti-Roll Bar Bushing kit (2 Bushings) for BMW E30
POWERFLEX PERFORMANCE 21mm Front Anti-Roll Bar Bushing kit (2 Bushings) for BMW E30
POWERFLEX PERFORMANCE Rear Suspension Bushing kit (2 Hard Bushings) for BMW E30 or other models for M3-style suspension alignment
kitA 2 VENAIR silicone water hoses, BLACK for VOLVO S/V70 2.4 naturally aspirated 144HP 98-00
Pair of Bilstein B6 rear shock absorbers for FIAT Stilo 192, part number 24-067911SOLD AS A PAIR
RC RACING stainless steel intermediate silencer manufactured from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics,...
RC RACING stainless steel decat pipe/catalyst made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED...
RC RACING stainless steel intermediate silencer made from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT...
RC RACING stainless steel decat pipe/catalyst made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED...
Muffler stainless steel RC RACING for TOYOTA GT86 2.0 16V, without hoses of outlet (rework those OEM)
VENAIR supercharger silicone air hose, BLUE color for PORSCHE 996 TURBO S/TT/X50/GT2 420CV 00-05Diversion hosecompatible with:PORSCHE 996 TURBO: S/TT/X50/GT2 420CV from 2000 to 2005, engine H3.6L - M96.70/M96.70S
Known as the "IRESA silencer", here you will find the RC RACING ET362-GN stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
Known as the "IRESA silencer", here you will find the RC RACING ET244-GN stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
RC RACING manifold made of 304L stainless steel, with wide welds and tight tolerances, allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameters, manifold flange modifications, vehicle/competition specifications, etc.).Not road legal.
60mm Crankshaft Trimetal Bearings KING RACE with Shoulder for Subaru
Tri-metal King RACE Crankshaft Bearings, ORIGINAL Rating for NISSAN 2.5 DOHC 24V (Incl. Turbo) RB25DET, RB25DETT
Tri-metal King RACE Crankshaft Bearings, ORIGINAL Rating for NISSAN 2.0 SR20DET (GTiR), 16V
VENAIR silicone water hose kit (2 hoses), RED, for MITSUBISHI EVO V 2.0 16V 96-98
Tri-metal Rod Bearings KING RACE ORIGINAL Size MAZDA 1.6 SOHC 8V B6, B6F
Bearings of Connecting rods Tri-metal King RACE, ORIGINAL rating for HONDA 2.0 DOHC 16V K20A3
17mm ISB ball Gasket, male M16x200, right-hand thread