Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
Categories
Manufacturers
Categories
KENT CAMS reinforced timing belt, reference CB20The belt is sold alone (without tensioner).Image for illustrative purposes only
KENT CAMS reinforced timing belt, reference CB15The belt is sold alone (without tensioner).Image for illustrative purposes only
H&R Lowering Springs Front -30mm / Rear -30mm for TOYOTA Yaris (XP9) 1.0, 1.3 5.05-11.10
H&R Lowering Springs Front -30mm / Rear -30mm for SEAT Ibiza II (6K1) 1.0, 1.3, 1.4, 1.6, 1.8, 2.0 9.93-8.99
H&R front short springs -40mm / rear -40mm for NISSAN Note 1.5DCI 2.06-
H&R Lowering Springs Front -20mm / Rear -25mm for BMW 3 Series (F31) Touring M-Technic 325d, 330d, 335i 6.12-
Inner diameter 32mm Length 1 meter MTDA single-layer neoprene boa sheath
BMW E34 525i 1987-1996 Reinforced Clutch Mechanism SAFFA from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: SAFFA reinforced clutch mechanism for BMW E34 525i from 1987 1996.
POWERFLEX BLACK SERIES 4-part Hard Bushing kit Rear Control Arms, Outer and Inner, for BMW E34The "Black Series" range from industry leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds to Part Number 10 (see below):
Steel nut for DASH 6 / AN 6 bulkhead fitting (JIC 9/16")
SAFFA reinforced clutch mechanism for VW GOLF II GTI, 1.8 8V engine from 1985 to 1991
SAFFA reinforced clutch mechanism for RENAULT 16 from 1965 to 1980
SAFFA reinforced clutch mechanism for LADA NivaFor 200mm diameter disc The reinforced mechanisms have the same dimensions and tolerances as the series, but with increased plate pressure, as well as damping tabs reinforced. Non-contractual photo
Reinforced sintered metal clutch disc with 4 damping pads SAFFA for VW POLO II, 1.4 16V engine
High-quality Rod bolt ARP 2000 NISSAN 2.6 24V RB26DET/DETT (Rod bolt ARP 2000 NISSAN 2.6 24V RB26DET/DETT) for reliable fitment and performance.
SAFFA rigid sintered metal reinforced clutch disc with 3 pads for SUZUKI Swift, 1.3 engineTechnical Information:Diameter: 190mmNumber of splines: 18 Disc compatible with original mechanism but attention your The original mechanism will wear out faster than a reinforced mechanism.
SAFFA rigid sintered metal reinforced clutch disc with 5 pads for SEAT Ibiza, 1.8 16V engine Technical Information:Diameter: 228mmNumber of splines: 28 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA 5-pad rigid sintered metal reinforced clutch disc for SUBARU Impreza WRX from 1992 to 2000
SAFFA 4-pad sintered metal reinforced clutch disc for SUBARU Impreza WRX from 1992 to 2000
Reinforced sintered metal clutch disc with 3 damping pads by SAFFA for SIMCA 1100 from 1967 to 1981
RENAULT 16 1965-1980 Reinforced sintered metal rigid clutch disc with 4 pads SAFFA from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Reinforced rigid sintered metal clutch disc 4 SAFFA pads for RENAULT 16 from 1965 1980.
Reinforced rigid sintered metal clutch disc with 3 pads, SAFFA, for RENAULT 5 Alpine, 1.4 8V engine from 1976 to 1982Technical Information:Diameter: 180mmNumber of splines: 20 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA 4-pad sintered metal reinforced clutch disc for RENAULT Clio Williams, 2.0 16V engine from 1993 to 1995
Reinforced sintered metal clutch disc cushioned 4 SAFFA pads for PORSCHE 924
SAFFA 4-pad sintered metal reinforced clutch disc for PEUGEOT 405 Mi16, 2.0 16V engine from 1992 to 1995Technical Information:Diameter: 215mmNumber of splines: 18 Disc compatible with original mechanism but Attention Your original mechanism will wear out faster than a reinforced mechanism.
SAFFA 4-pad sintered metal reinforced clutch disc for PEUGEOT 309 GTI, 1.9 8V engine from 1987 to 1993Technical Information:Diameter: 200mmNumber of splines: 18 Disc compatible with the original mechanism, but note your original mechanism will wear out more more quickly than a reinforced mechanism.
Reinforced rigid sintered metal clutch disc with 4 pads, SAFFA, for OPEL MantaTechnical Information:Diameter: 215mmNumber of splines: 14 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
Reinforced sintered metal clutch disc cushioned 3 SAFFA pads for OPEL Corsa 1200
SAFFA 6-pad sintered metal reinforced clutch disc for OPEL Calibra, 2.0 16V Turbo engine from 1994 to 1998Technical Information:Diameter: 228mmNumber of splines: 14 Disc compatible with original mechanism but note your original mechanism will wear out faster than a new one reinforced.
SKF Rear Suspension Bump Stop kit for BMW 3 Series (E30) Touring 316i, 318i, 320i, 325i, 324Td Price per pair Suspension kits include the main upper suspension components such as bearings, filter blocks. The high-quality bearings in an SKF suspension kit allow the MacPherson strut suspension to rotate with less friction. 100,000 km is equivalent to 1...
Gasket Cylinder head reinforced Athena TOYOTA 3.0 2JZ-GTE
ATHENA Reinforced Cylinder Head Gasket, Reference 338409RATHENA cylinder head gaskets consist of 3 to 5 layers of different materials. They can withstand higher compression ratios or forced induction.Image for illustrative purposes only
Reinforced cylinder head gasket ATHENA reference 338048R for:-FORD ESCORT V RS Cosworth 4X4 2.0 N5F 220hp 10/1991 - 01/1995-FORD ESCORT VI RS Cosworth 4X4 2.0 N5F 220hp 02/1995 - 10/1998-FORD SIERRA Cosworth 4X4 2.0 16V N5C 220hp 01/1990 - 02/1993-FORD SIERRA RS Cosworth 4X4 2.0 N5B 204hp 01/1987 - 12/1990-FORD SIERRA RS Cosworth 4X4 2.0 N5B 204hp 11/1987...
Reinforced Cylinder Head Gasket ATHENA 100mm Bore 1.2mm Thickness for Subaru
POWERFLEX Performance silent blocks, reference PFR5-606Hard silent blocks from the "Performance" polyurethane range by the market leader POWERFLEX, designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and intended for a long service life.
SAFFA 4-pad sintered metal reinforced clutch disc for OPEL Astra G 1.8 16V from 1998 to 2004Technical Information:Diameter: 215mmNumber of splines: 24 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
Reinforced sintered metal clutch disc with 3 damping pads by SAFFA for AUTOBIANCHI A 112 Abarth from 1969 to 1985Technical Information:Diameter: 170mmNumber of splines: 20 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA rigid sintered metal reinforced clutch disc with 3 pads for FORD KA
RC RACING Africa pipes/decatalytic converters made of 304L stainless steel, with with welds and tight tolerances allowing for easy installation in place of the original part.
Powerflex PERFORMANCE rear anti-torque silent block insert for SEAT Leon II from June 2008 to 2012
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE Interieur arm rear superieur from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Powerflex Performance 2-part Hard Bushing kit Upper Rear Control Arm Inner for SEAT Leon II The range from industry leader.
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE Exterieur arm rear superieur from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Powerflex Performance 2-part Hard Bushing kit Upper Rear Control Arm Outer for SEAT Leon II The range from industry leader.
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE Interieur arm rear lower from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Powerflex Performance 2-part Hard Bushing kit for Lower Rear Control Arms on SEAT Leon II The range from industry leader.
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE outer arm rear lower from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Powerflex Performance 2-part Hard Bushing kit for Lower Rear Suspension Arm Outer SEAT Leon II The range from industry leader.
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE inner arm rear lower (dampedsseur) from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: POWERFLEX PERFORMANCE 2-part Hard Bushing kit for Lower Rear Control Arm Shock Absorber SEAT Leon II The range from industry.
SEAT Leon II kit 2 bushing hard POWERFLEX PERFORMANCE outer arm rear lower (dampedsseur) from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: POWERFLEX PERFORMANCE 2-part Hard Bushing kit for Lower Rear Suspension Arm Shock Absorber SEAT Leon II The range from industry.
POWERFLEX PERFORMANCE 2-part Hard Bushing kit Front Rear Tie Rod (on chassis) for SEAT LEON IIThe "Performance" range from market leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Reference 8 (see below):
SAFFA reinforced clutch mechanism for FIAT 132 1.6 1.7 2.0 1972-1982
SAFFA 5-pad sintered metal reinforced clutch disc for FIAT Coup?, 2.0 20V Turbo engine from 1996 to 2000Technical Information:Diameter: 228mmNumber of splines: 20 Disc compatible with original mechanism but note your original mechanism will wear out faster than a new one reinforced.
Reinforced sintered metal clutch disc with 4 damped pads, SAFFA, for FIAT Coup?, 2.0 16V engine from 1995 to 2001Technical Information:Diameter: 215mmNumber of splines: 20 Disc compatible with original mechanism but note your original mechanism will wear out faster than a replacement mechanism reinforced.
Reinforced sintered metal rigid clutch disc with 3 pads by SAFFA for FIAT Cinquecento Sporting, 1.1 engine from 1991 to 1998Technical Information:Diameter: 180mmNumber of splines: 20 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a replacement mechanism reinforced.
Reinforced sintered metal clutch disc with 4 damped pads, SAFFA, for CITROEN C2 VTR, 1.6 16V engine from 2003 to 2009Technical Information:Diameter: 200mmNumber of splines: 18 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
Reinforced sintered metal clutch disc with 4 damped pads by SAFFA for CITROEN Saxo all models (Except VTS) from 1996 to 2003Technical Information:Diameter: 200mmNumber of splines: 21 Disc compatible with original mechanism but note your original mechanism will wear out faster than a replacement mechanism reinforced.
SAFFA 3-pad sintered metal reinforced clutch disc for CITROEN AX, 1.4 GT engine from 1986 to 1999Technical Information:Diameter: 180mmNumber of splines: 18 Disc compatible with the original mechanism, but note your original mechanism will wear out faster than a reinforced mechanism.
SAFFA reinforced clutch mechanism for ALFA ROMEO 146, 1.7 16V Boxer type engine from 1995 to 2001For 200 diameter discThe reinforced mechanisms have the same dimensions and tolerances than the series, but with increased plate pressure, as well as reinforced damping tabs. Non-contractual photo
Reinforced rigid sintered metal clutch disc 4 SAFFA pads for ALFA ROMEO 75 TD from 1985 to 1993
AUDI 80/100 1.4/1.6/1.8/2.0 AWD/S2/2.2/2.3 Disc clutch metal sintered reinforced SACHS PERFORMANCE
SAFFA reinforced clutch mechanism, reference EMB-FN363RTechnical Information:- Diameter: 200mmImage for illustrative purposes only
