Skip to content
  • On order
Reinforced exhaust valves BMW M3 E90 E92 S65B40 Reinforced exhaust valves BMW M3 E90 E92 S65B40

Reinforced exhaust valves BMW M3 E90 E92 S65B40

€824.31 (tax incl.)
€1,030.39 (tax incl.) -20%

Set of 16 reinforced exhaust valves for BMW S65B40.

  • Brand: SUPERTECH
  • Engine: S65B40 (M3 E90, E92, E93)
  • Dimensions: 30.5 mm head, 5 mm stem
  • Material: Inconel, single groove
BMEVI-1065-16
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines covered

The S65B40 is the naturally aspirated V8 of the E90, E92 and E93 M3: 3,999 cc, 92 mm bore and 75.2 mm stroke, built from 2007 to 2013. Its very short stroke lets it rev high, with four valves per cylinder.

Its 16 exhaust valves have a thin 5 mm stem and a single groove; They are fitted with the original BMW collets and valve stem seals. A track session holds this V8 near its maximum rpm for a long time, and its exhaust valves under a continuous thermal load.

SUPERTECH reinforced exhaust valves

On the S65B40, each of the 16 exhaust valves lets the burnt gases out of its cylinder. In naturally aspirated form the head metal climbs to 760 to 870 °C; once a supercharger is fitted, it goes past 1,000 °C. Around 75 % of that heat passes to the cylinder head via the seat, and 20 % via the guide. Taken simply as a benchmark, an EV8 family steel holds 550 MPa at 600 °C but drops to 300 MPa at 800 °C: a V8 kept near its maximum revs for long periods overheats the head, which tires, warps and ends up leaking on its seat.

SUPERTECH machines the BMEVI-1065 from Inconel, a nickel alloy that still withstands 860 MPa around 730 °C and 554 MPa around 815 °C: near 800 °C, its margin over EV8 steel reaches about 85 %. This material is aimed first at hard-driven S65 engines, on track or supercharged. The 5 mm stem carries a single groove, like the BMW part.

It keeps the dimensions of the original part: 30.5 mm head and 110.2 mm overall length. The 16 exhaust valve seats therefore need no recutting to a new size, and a check is enough when rebuilding the cylinder head of an M3 E90, E92 or E93.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
BMEVI-1065-16 SUPERTECH Standard 30.5 mm 5 mm 110.2 mm 1 Inconel

Valve fitting

PartBMW originalReinforced
Collets 11 34 7 838 296
Valve stem seals Kit 11 34 0 032 548
Valve guide Inner Ø 5.0 mm

The single groove of the BMEVI-1065 matches the BMW valve: the original collets, preferably new, are kept.

The head keeps its 30.5 mm, so the exhaust seats only need an inspection when the head is rebuilt.

On the S65, the original BMW valve stem seals are kept.

Technical guide

Our brand

SUPERTECH SUPERTECH Performance, based in California's Silicon Valley, has developed racing valves, titanium retainers, guides and valve springs for over 30 years. Made of stainless steel, titanium or Inconel, every design begins with one specific engine, then gets refined with known drag racing, rally and circuit tuners.

How to choose

Only one exhaust valve is available for the S65B40: the BMEVI-1065, in Inconel, with the original 30.5 mm head and a single groove. What remains to decide is the intended use and the collets that go with it:

CriterionOption 1Option 2
Size Standard, 30.5 mm
BMEVI-1065: the 16 exhaust valve seats stay at their size, a simple check is enough on reassembly.
Grooves Single groove
Same single groove as the BMW valve: the original collets, new if possible, go back on as they are.

When reinforced valves become necessary

  • Supercharger fitted to the V8 (Inconel version, the only one offered)
  • Sharper camshafts or stiffer valve springs
  • Repeated track sessions in an M3 E90, E92 or E93
  • Rev limit raised through a remap
  • Exhaust valves burnt, worn or marked at a head rebuild

Vehicle compatibility

ModelEngine codePowerYears
M3 / M3 CRT (E90) S65B40 420-450 hp 2007-2011
M3 / M3 GTS (E92) S65B40 420-450 hp 2007-2013
M3 (E93) S65B40 420 hp 2008-2013

OEM part number (exhaust valve): 11 34 7 838 294

Important: the BMEVI-1065 also exists as a set of 20 for the S85B50 V10 (M5 E60, M6 E63), sold on a separate page.

Don't forget the inlet valves

When the cylinder head of an S65B40 comes off, take the opportunity to replace the inlet valves of the V8 as well. Here is the part intended for this engine:

Inlet valves BMW M3 E90 E92 S65B40 →

10 other products in the same category

Loading...