Skip to content
  • In stock
Reinforced inlet valves BMW M3 S65B40 S65B44 Reinforced inlet valves BMW M3 S65B40 S65B44

Reinforced inlet valves BMW M3 E90 E92 E93 S65B40 S65B44

€583.68 (tax incl.)
€729.60 (tax incl.) -20%

Set of 16 reinforced inlet valves for BMW M3 S65B40 and S65B44.

  • Brand: SUPERTECH
  • Engines: S65B40, S65B44 (V8 4.0 and 4.4 32V)
  • Dimensions: 35.4 mm head, 4.97 mm stem, 111.75 mm long
  • Material: black nitrided stainless steel, 1 groove
BMIVN-1065-16
1 in stock in Europe (72h lead time)
Pay in installments

BMW engines covered

The S65 is the naturally aspirated BMW M V8: 4.0 litres, 32 valves, twin overhead camshafts per bank and hydraulic tappets. It powers the M3 E90, E92 and E93 (420 hp); its 4.4 litre S65B44 version is fitted to the M3 CRT and GTS (450 hp).

Its 16 original inlet valves, BMW 11 34 7 838 293, have a 35.7 mm head and a 4.97 mm stem, held by collets 11 34 7 838 296. Higher revs, sharper camshafts or track use expose them to more heat and impact.

SUPERTECH reinforced inlet valves

On the S65 V8 of the M3, the cam opens the 16 inlet valves one by one to let fresh air into the eight cylinders; on every closing, the valve strikes its seat while its 4.97 mm stem slides in the guide. All this happens between 400 and 550 °C, a heat at which the chrome-silicon steel of ordinary valves drops from 500 MPa at 500 °C to 250 MPa at 600 °C, losing 50 % of its strength.

The SUPERTECH BMIVN-1065-16 starts as stainless steel and receives a black nitride finish: its surface-hardened stem rubs in the guide while wearing more slowly and is less prone to scuffing. It keeps the 4.97 mm stem diameter of the original part and carries a 35.4 mm head.

Inlet valve technical specification

Part numberBrandSizeHead Ø
OEM 35.7 mm
Stem Ø
OEM 4.97 mm
LengthGroovesMaterial
BMIVN-1065-16 SUPERTECH Standard 35.4 mm 4.97 mm 111.75 mm 1 Stainless steel, black nitrided

Fitting details

PartBMW originalReinforced
Collets 11 34 7 838 296
Valve stem seals 11 34 0 032 548
Valve guide

The SUPERTECH valve keeps the single groove of the original valve.

Supplied in standard size, it fits seats reconditioned during the cylinder head rebuild, with no machining to a new size.

Clearance is taken up by the hydraulic tappets: no adjustment is needed after the valves are replaced.

Technical guide

The brand offered

SUPERTECH SUPERTECH Performance, a Californian maker whose valves, springs and guides have been racing for over thirty years, puts each production run through a threefold inspection, ultrasonic, radiographic and laser, before anything leaves for engine builders.

When reinforced valves become necessary

  • Hotter cam lobes or noticeably firmer springs
  • Rev limiter pushed further back with a remap
  • Supercharger grafted onto the atmospheric V8
  • Engine built for track use or circuit days
  • Factory valves pitted, worn or warped

Compatible vehicles

ModelEngine codePowerYears
M3 (E90) S65B40 420 hp 2007-2011
M3 (E92) S65B40 420 hp 2007-2013
M3 (E93) S65B40 420 hp 2008-2013
M3 CRT (E90) S65B44 450 hp 2011
M3 GTS (E92) S65B44 450 hp 2007-2013

OEM part number (inlet valve): 11 34 7 838 293

Important: a set of 16 covers a complete engine. The S85B50 V10 of the M5 E60 and M6 E63 takes the same valve in a set of 20, offered on its own product page.

Related products

While the V8's heads are off, seize the moment to also change the exhaust valves of this same engine, also offered in a reinforced version:

Exhaust valves BMW M3 E90 E92 E93 S65B40 S65B44 →

10 other products in the same category

Viewed products

Loading...