- On order
Reinforced exhaust valves VW Golf 4 Golf 5 R32 3.2 24V
Set of 12 reinforced exhaust valves for the VW R32 3.2 24V (6 short and 6 long).
- Brands: SUPERTECH, FERREA
- Engines: BFH, BML (Golf 4 R32), BUB, CBRA (Golf 5 R32)
- Dimensions: 30.2 mm or 31.2 mm head, 6 mm stem
- Material: Inconel from SUPERTECH
VW engines covered
The narrow-angle V 3.2 24V six-cylinder powers the Golf 4 R32 (BFH, BML, 241 hp, 2002 to 2005) and then the Golf 5 R32 (BUB, CBRA, 250 hp, 2005 to 2008). Its single cylinder head covers both cylinder banks.
This layout calls for two valve lengths: of the 12 exhaust valves, 6 are short (022 109 611 N, 102.2 mm) and 6 long (022 109 611 P, 136.1 mm), both with a 30.2 mm head and a 6 mm stem; the early BFH and BML took the 022 109 611 L and M, no longer supplied. Each set therefore combines the two lengths.
SUPERTECH and FERREA reinforced exhaust valves
The R32's 3.2 24V houses its six cylinders in a very narrow V under a single head, and its 12 exhaust valves sit permanently in the flow of burnt gases leaving the chambers. In the metal, their heads run between 760 and 870 °C unboosted, and would pass 1,000 °C if a supercharger or turbo were grafted on. That heat drains away by contact, about 75 % through the seat and 20 % through the guide. The reference steel, from the EV8 family, holds 550 MPa at 600 °C, then only 300 MPa at 800 °C: beyond that stage, the head tires, warps and no longer closes its seat properly.
The reinforced versions rely on nickel alloys. SUPERTECH supplies its two lengths, the short VWEVI-1044SS and the long VWEVI-1044SL, in Inconel, which keeps 860 MPa at 732 °C and 554 MPa at 816 °C, roughly 85 % better than EV8 around 800 °C. FERREA offers its F2288P to F2291P in Super Alloy, a nickel-based alloy from its Competition Plus range, and offers them in two head sizes.
With the F2290P and F2291P, the head grows by one millimetre, from 30.2 to 31.2 mm, leaving the 6 mm stem as it is. The passage offered to the gases widens, the cylinder empties and fills more easily, and power benefits; in return, the 12 exhaust seats are machined to that diameter. Every part number keeps the two lengths the head demands: 102.2 and 136.1 mm at SUPERTECH, as on the original, 102.6 and 136.5 mm at FERREA.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø OEM 30.2 mm | Stem Ø OEM 6 mm | Length OEM 102.2 / 136.1 mm | Grooves | Material |
|---|---|---|---|---|---|---|---|
| VWEVI-1044SS-6+VWEVI-1044SL-6 | SUPERTECH | Standard | 30.2 mm | 6 mm | 102.2 / 136.1 mm | 1 | Inconel |
| F2288P*6+F2289P*6 | FERREA | Standard | 30.2 mm | 6 mm | 102.6 / 136.5 mm | Super Alloy (nickel-based) | |
| F2290P*6+F2291P*6 | FERREA | +1 mm | 31.2 mm | 6 mm | 102.6 / 136.5 mm | Super Alloy (nickel-based) |
Valve fitting
| Part | VW original | Reinforced |
|---|---|---|
| Collets | KPR-6S-7 (1 groove) | |
| Valve stem seals | 036 109 675 A | |
| Valve guide | 022 103 831 B |
The SUPERTECH valves have a single groove and are fitted with single groove collets such as the KPR-6S-7; for the FERREA valves, check the collets against the chosen part number.
At 30.2 mm, the VW size, the exhaust seats stay as they are; at 31.2 mm they are recut to the new diameter, on all 12 seats.
On the 3.2 24V, VW fits the 036 109 675 A stem seals as original equipment.
Technical guide
Our brands
| SUPERTECH, a Californian house based in San Jose, has devoted more than three decades to valves and racing valvetrains. For the R32, it combines both valve lengths in one kit, both in Inconel, a part drawn for this precise engine and tested with tuners in competition. | |
| FERREA came into being in 1978, when Horacio Ferrea teamed up with Daniel Urrutia; its production sites are in Florida and Argentina. For the 3.2 24V, the brand supplies its pairs of lengths in Super Alloy, at standard size as well as +1 mm, for road and track use alike. |
How to choose
Each kit automatically combines the 6 short and 6 long valves of the head. What remains to decide is the head size, which governs any work on the seats, followed by the material the valves are made of.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 30.2 mm For a head whose 12 exhaust seats, still sound, stay at their factory diameter: the kit goes in without machining. SUPERTECH VWEVI-1044SS-6+VWEVI-1044SL-6 in Inconel; FERREA F2288P*6+F2289P*6 in Super Alloy. |
+1 mm, 31.2 mm A head widened by one millimetre passes more gas, around 10 to 12 extra cfm, with power rising in step; the seat machining brings a tired head back to shape at the same time. FERREA F2290P*6+F2291P*6, the only enlarged version offered for this engine. |
| Material | Inconel SUPERTECH VWEVI-1044SS and VWEVI-1044SL, 1 groove, single-groove collets such as the KPR-6S-7. This nickel superalloy stays strong above 800 °C: the version to aim for if the R32 gets a supercharger or turbo. |
Super Alloy FERREA F2288P to F2291P, a nickel-based alloy from the Competition Plus range, available at standard size and +1 mm. Before fitting, check which collets go with the chosen part number. |
When reinforced valves become necessary
- Supercharger or turbo added to the R32 (Inconel version recommended)
- Sharper camshafts or stiffer valve springs fitted
- Frequent track days or hill climb use
- Head overhaul, marked or burnt exhaust valves
- Seats recut at +1 mm for more flow
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Golf 4 R32 | BFH / BML | 241 hp | 2002-2005 |
| Golf 5 R32 | BUB / CBRA | 250 hp | 2005-2008 |
OEM part number (exhaust valve): 022 109 611 N (short), 022 109 611 P (long)
Don't forget the inlet valves
With an R32 cylinder head on the bench, take the chance to fit new inlet valves and a full set of fresh stem seals too. Find them here for your 3.2 24V:
| VW R32 3.2 24V inlet valves → |
-
Brand
-
ReferenceF2288P*6+F2289P*6