- In stock
Reinforced cylinder head gasket VAG 1.8 2.0 TFSI EA888 Gen.3
Reinforced Athena and Cometic head gasket, as O-Ring, MLS or MLX. One gasket per engine.
- Brands: Athena, Cometic
- Engines: EA888 Gen 3, 1.8 and 2.0 TFSI
- Bore: 83 to 84 mm
- Thickness: 0.686 to 3.556 mm
- Replaces: 06K 103 383 E, 06K 103 383 K, 06L 103 383 B
The Volkswagen and Audi engines covered
The third-generation EA888 is a turbocharged inline four of 1.8 and 2.0 litres, used by Volkswagen, Audi, Seat and Skoda under the TSI and TFSI names. It powers, among others, the Golf VII, Octavia III, Leon, Audi A3, A4, A5, Q3, Q5, TT and Passat B8 listed in the survey below. The gasket is sold individually, one per engine.
The original gaskets carry part numbers 06K 103 383 E, 06K 103 383 K and 06L 103 383 B. The manufacturer publishes neither their bore, nor their thickness, nor their construction. They are sized for standard combustion pressure; as soon as it rises, the head clamping weakens, the head lifts and coolant gets into a cylinder.
Reinforced cylinder head gaskets
The gasket does not seal the engine alone: the fasteners that clamp the head onto the block matter just as much. A composite gasket settles for good beyond 100 N/mm², whereas the 301 stainless steel of the MLS and MLX withstands 517 N/mm², 5 times more, and springs back with every combustion. With the O-Ring, the stainless ring isolates the combustion chamber alone and the gasket body closes the water and oil circuits, with no machining of the block.
This page brings together the part numbers of two competition makers, Athena and Cometic, in three constructions: the stainless-ring O-Ring from Athena, and the multi-layer MLS and chamber-stop MLX from Cometic. Bores run from 83 to 84 mm and thicknesses from 0.686 to 3.556 mm, enough to set the compression ratio without touching pistons or head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.
Technical specifications
| Gasket bore | Thickness | Gasket volume | Gasket type OEM not specified |
Brand | Part number OEM 06K 103 383 E |
| 83 mm | 0.69 mm | 3.73 | MLS | Cometic | C4978-027 |
| 83 mm | 0.76 mm | 4.11 | MLS | Cometic | C4978-030 |
| 83 mm | 0.91 mm | 4.92 | MLS | Cometic | C4978-036 |
| 83 mm | 0.91 mm | 4.92 | MLX | Cometic | C14009-036 |
| 83 mm | 1.02 mm | 5.52 | MLS | Cometic | C4978-040 |
| 83 mm | 1.14 mm | 6.17 | MLS | Cometic | C4978-045 |
| 83 mm | 1.30 mm | 7.03 | MLS | Cometic | C4978-051 |
| 83 mm | 1.42 mm | 7.68 | MLS | Cometic | C4978-056 |
| 83 mm | 1.52 mm | 8.22 | MLS | Cometic | C4978-060 |
| 83 mm | 1.68 mm | 9.09 | MLS | Cometic | C4978-066 |
| 83 mm | 1.78 mm | 9.63 | MLS | Cometic | C4978-070 |
| 83 mm | 1.91 mm | 10.33 | MLS | Cometic | C4978-075 |
| 83 mm | 2.03 mm | 10.98 | MLS | Cometic | C4978-080 |
| 83 mm | 2.18 mm | 11.80 | MLS | Cometic | C4978-086 |
| 83 mm | 2.34 mm | 12.66 | MLS | Cometic | C4978-092 |
| 83 mm | 2.49 mm | 13.47 | MLS | Cometic | C4978-098 |
| 83 mm | 3.05 mm | 16.50 | MLS | Cometic | C4978-120 |
| 83 mm | 3.56 mm | 19.26 | MLS | Cometic | C4978-140 |
| 83.5 mm | 1.40 mm | 7.67 | O-Ring | Athena | 330148R |
| 84 mm | 0.69 mm | 3.82 | MLS | Cometic | C4979-027 |
| 84 mm | 0.76 mm | 4.21 | MLS | Cometic | C4979-030 |
| 84 mm | 0.91 mm | 5.04 | MLS | Cometic | C4979-036 |
| 84 mm | 1.02 mm | 5.65 | MLS | Cometic | C4979-040 |
| 84 mm | 1.14 mm | 6.32 | MLS | Cometic | C4979-045 |
| 84 mm | 1.30 mm | 7.20 | MLS | Cometic | C4979-051 |
| 84 mm | 1.42 mm | 7.87 | MLS | Cometic | C4979-056 |
| 84 mm | 1.52 mm | 8.42 | MLS | Cometic | C4979-060 |
| 84 mm | 1.68 mm | 9.31 | MLS | Cometic | C4979-066 |
| 84 mm | 1.78 mm | 9.86 | MLS | Cometic | C4979-070 |
| 84 mm | 1.91 mm | 10.58 | MLS | Cometic | C4979-075 |
| 84 mm | 2.03 mm | 11.25 | MLS | Cometic | C4979-080 |
| 84 mm | 2.18 mm | 12.08 | MLS | Cometic | C4979-086 |
| 84 mm | 2.34 mm | 12.97 | MLS | Cometic | C4979-092 |
| 84 mm | 2.49 mm | 13.80 | MLS | Cometic | C4979-098 |
| 84 mm | 3.05 mm | 16.90 | MLS | Cometic | C4979-120 |
| 84 mm | 3.56 mm | 19.73 | MLS | Cometic | C4979-140 |
The volume of a gasket is the free space it leaves above each cylinder. It adds to the combustion chamber and lowers the compression ratio by the same amount. Compare these volumes only between gaskets of the same bore.
Preparation and fitting
| Fasteners | Engines | Tightening torque |
| Original cylinder head bolts WHT 005 305, M10x1,5 x 115 |
1.8 / 2.0 TFSI EA888 Gen.3 | not published by the manufacturer |
| ARP cylinder head studs ARP-204-4302 |
1.8 / 2.0 TFSI EA888 Gen.3 | 36 Nm, then 72 Nm, then 108 Nm |
Before fitting, check the flatness of the head and of the block with a straight edge, and have whichever needs it resurfaced. Add no gasket sealant: Athena and Cometic deliver their gaskets already coated.
| Reinforced ARP cylinder head studs 1.8 / 2.0 TFSI EA888 Gen.3 → |
Technical guide
The three constructions offered
![]() |
O-Ring / Cut Ring Athena A steel body lined with asbestos-free aramid fibre, in which a stainless compression ring is crimped around each cylinder. The ring transfers the clamping load to a narrow band, where the sealing is played out, and a silicone bead protects the water and oil passages. It is the construction that holds the highest combustion pressures of the range. |
![]() |
Cometic MLS Pressed stainless steel sheets, stacked and riveted. The outer sheets carry active beads around each cylinder and each fluid passage. Sealing comes from a moderate clamping load with little bore distortion. It is the all-round choice, from a simple uprated rebuild to moderate boost. |
![]() |
MLX Cometic Embossed, riveted stainless steel sheets, with a central sheet folded into a stopper around the combustion chamber, under a high-temperature coating. The clamping load concentrates where it is needed, without distorting the bore any further. It is the sturdiest all-steel gasket, designed for heavy boost; it is offered here in 83 mm, in a single thickness, 0.914 mm. |
Choosing bore and thickness
Gasket bore. The Athena O-Ring comes in 83.5 mm, the Cometic MLS in 83 and 84 mm, the Cometic MLX in 83 mm only.
Thickness. For the original gaskets, Volkswagen and Audi communicate no thickness. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.
| Your goal | Thickness to choose |
| Keep the original compression ratio | Original thickness not published: measure the removed gasket, then choose the closest offered value between 0.686 and 3.556 mm |
| Skimmed cylinder head, make up the lost height | Between 0.686 and 3.556 mm, start from the thickness of the removed gasket and add the material taken off when resurfacing |
| Forced induction build, lower the ratio | 3.556 mm, when the removed gasket is thinner |
| Naturally aspirated build, raise the ratio | 0.686 mm, when the removed gasket is thicker |
As the original thickness is not published, read with a dial gauge how far the pistons stand above the block's gasket face: this figure gives the clearance left between piston and head, above all with the thinnest values.
The two brands
| Athena S.p.A. is an Italian group making gaskets and engine parts, based in Alonte, in the Veneto, with sites in Spain, the United States, Brazil and India. Its multi-layer gaskets are fitted as original equipment by several car makers, and its competition range is designed and produced entirely in Italy. | |
| Cometic Gasket, Inc. is an American maker of engine sealing gaskets, founded in 1989 in Concord, Ohio. Its speciality is the made-to-measure gasket, in the bore and thickness wanted, produced entirely in the United States from American materials. |
Advantages over the original gasket
| Criterion | Original gaskets 06K 103 383 E, 06K 103 383 K, 06L 103 383 B | Reinforced gaskets |
| Construction | Not specified by the manufacturer | Multi-layer stainless steel, or steel and aramid fibre with a stainless ring |
| Gasket bore | not published by the manufacturer | 83 to 84 mm |
| Thicknesses available | not published by the manufacturer | 0.686 to 3.556 mm, 18 values |
| Compression ratio adjustment | None | Through the thickness chosen |
| Resistance to overpressure | Limited to standard output | Designed for forced induction |
When a reinforced gasket becomes necessary
- Adding forced induction, or raising boost on an already turbocharged engine
- Cylinder rebored beyond what the bore of the gaskets offered (83 to 84 mm) covers
- Looking for a compression ratio different from standard, higher or lower
- Engine that has already lost its gasket, or is consuming coolant
- Competition use, where the gasket goes through repeated temperature rises
Vehicle compatibility
| Brand | Model | Engine code | Power | Years |
| AUDI | A1 (8X1, 8XK, 8XA, 8XF) | CWZA, DAJB | 192 - 231 hp | 2014 - 2018 |
| AUDI | A1 Sportback (GBA) | CZPC, DKZC | 200 hp | 2018 - |
| AUDI | A3 (8V1, 8VK, 8V7, 8VE, 8VS, 8VM, 8VA, 8VF) | CHHB, CJSA, CJSB, CJXB, CJXC, CJXD, CJXF, CJXG, CNSB, CNTC, CYFB, CZPB, CZRA, DJHA, DJHB, DJJA, DKZA, DLRA, DNUE | 170 - 310 hp | 2012 - 2020 |
| AUDI | A4 B8 (8KH, 8K2, 8K5) | CJEB, CNCD | 170 - 224 hp | 2011 - 2016 |
| AUDI | A4 B9 (8WH, 8WJ, 8W2, 8WC, 8W5, 8WD) | CVKB, CVKC, CVLA, CYMC, CYRB, CYRC, DBPA, DDWA, DEMA, DEMB, DKNA, DKYA, DLHB, DLVA, DLVB, DMSB | 150 - 252 hp | 2015 - |
| AUDI | A5 (8T3, 8TA) | CJEB, CJED, CJEE, CNCD, CNCE | 144 - 230 hp | 2007 - 2017 |
| AUDI | A5 (F53, F5P, F57, F5E, F5A, F5F) | CVKB, CVLA, CYMC, CYRB, CYRC, DDWA, DEMA, DHDA, DKNA, DKYA, DLHB, DLVA, DLVB, DMSB | 150 - 252 hp | 2016 - |
| AUDI | A5 Décapotable (8F7) | CJEB, CJEE, CNCD, CNCE | 170 - 230 hp | 2011 - 2017 |
| AUDI | A6 C7 (4G2, 4GC, 4G5, 4GD) | CYGA, CYNB, CYPA, CYPB | 190 - 252 hp | 2014 - 2018 |
| AUDI | A6 C8 (4A2, 4A5) | DKNA, DLHA | 245 hp | 2018 - |
| AUDI | A7 Sportback (4GA, 4GF) | CYGA, CYNB, CYPA, CYPB | 190 - 252 hp | 2014 - 2018 |
| AUDI | A7 Sportback (4KA) | DKNA, DLHA | 245 hp | 2018 - |
| AUDI | A8 D4 (4H2, 4H8, 4HC, 4HL) | CYPA | 252 hp | 2016 - 2018 |
| AUDI | Q2 (GAB, GAG) | CZPB, DKZA, DNFC, DNUE | 190 - 300 hp | 2017 - |
| AUDI | Q3 (8UB, 8UG) | CULB, CULC | 180 - 220 hp | 2014 - 2018 |
| AUDI | Q3 (F3B) | DKTA, DKTC | 190 - 230 hp | 2018 - |
| AUDI | Q5 (8RB) | CNCB, CNCD, CNCE | 180 - 230 hp | 2009 - 2017 |
| AUDI | Q5 (FYB, FYG) | DAXB, DAXC, DAYB, DJYA, DNTA | 245 - 252 hp | 2016 - |
| AUDI | Q7 (4MB, 4MG, 4MQ) | CYMC, CYRB, DMFB | 252 hp | 2015 - |
| AUDI | TT (FV3, FVP, FV9, FVR) | CHHC, CJSA, CJSB, CJXF, CJXG, CNTC, CYFB, DKTB, DKZB, DLRA, DNNB, DNPA, DNUF | 180 - 310 hp | 2014 - |
| SEAT | Alhambra (710, 711) | DEDA | 220 hp | 2015 - 2022 |
| SEAT | Ateca (KH7, KHP) | CZPB, DKZA, DNNA | 190 hp | 2017 - 2026 |
| SEAT | Ibiza IV SC (6J1, 6P5) | DAJA | 192 hp | 2015 - 2016 |
| SEAT | Leon (5F1, 5F5, 5F8) | CJSA, CJSB, CJXA, CJXC, CJXE, CJXG, CJXH, DKZA, DNUC, DNUE | 180 - 310 hp | 2013 - 2020 |
| SEAT | Tarraco (KN2) | DKZA | 190 hp | 2018 - 2024 |
| SKODA | Karoq (NU7, ND7) | DKZA | 190 hp | 2018 - |
| SKODA | Kodiaq I (NS6, NS7, NV7) | CZPA, DKZA | 180 - 190 hp | 2016 - |
| SKODA | Octavia III (5E3, NL3, NR3, 5E5, 5E6) | CHHA, CHHB, CJSA, CJSB, DHGA, DKTB, DKZA, DLBA | 180 - 245 hp | 2012 - 2020 |
| SKODA | Superb III (3V3, 3V5) | CHHB, CJSA, CJSC, CJXA, DNFE, DNUA | 180 - 280 hp | 2015 - 2024 |
| VOLKSWAGEN | Arteon (3H7, 3H8) | CZPB, DJHC, DKZA, DLRB, DNFE, DNUA | 190 - 280 hp | 2017 - 2024 |
| VOLKSWAGEN | Atlas (CA1, CA2, CA3) | CXDA | 220 hp | 2017 - 2023 |
| VOLKSWAGEN | Beetle (5C1, 5C2, 5C7, 5C8) | CPKA, CPLA, CPPA, CPRA, CULC | 170 - 220 hp | 2012 - 2019 |
| VOLKSWAGEN | Golf VI Décapotable (517) | CULC | 220 hp | 2013 - 2016 |
| VOLKSWAGEN | Golf VII (BA5, BV5, 5G1, BQ1, BE1, BE2) | CHHA, CHHB, CJSB, CJXB, CJXC, CJXD, CJXE, CJXG, CJXH, CNSA, CNSB, CNTA, CNTC, CXBA, CXBB, CXCA, CXCB, CXDA, CXDB, CYFB, DJHA, DJHB, DJJA, DKTB, DLBA, DLRA, DNUC, DNUE | 170 - 360 hp | 2013 - 2020 |
| VOLKSWAGEN | Jetta IV (162, 163, AV3, AV2) | CPKA, CPLA, CPPA, CPRA | 170 - 211 hp | 2012 - 2017 |
| VOLKSWAGEN | Passat B7 (A32, A33) | CPKA, CPRA | 170 hp | 2013 - 2017 |
| VOLKSWAGEN | Passat B8 (3G5, CB5, 3G2, CB2) | CHHB, CJSA, CJSC, CJXA, CXDA, DNFE, DNUA | 180 - 280 hp | 2014 - 2024 |
| VOLKSWAGEN | Polo V (6R1, 6C1) | DAJA, DAJB | 192 - 230 hp | 2014 - 2017 |
| VOLKSWAGEN | Polo VI (AW1, BZ1, AE1, BZ3) | CZPC, DKZC | 200 hp | 2017 - |
| VOLKSWAGEN | Scirocco III (137, 138) | CULA, CULC | 180 - 220 hp | 2013 - 2017 |
| VOLKSWAGEN | Sharan (7N1, 7N2) | DEDA | 220 hp | 2015 - 2020 |
| VOLKSWAGEN | T-ROC (A11, D11) | CZPB, DKZA | 190 hp | 2017 - |
| VOLKSWAGEN | Tiguan (AD1, AX1) | CHHB, CZPA, DKTA, DKZA | 180 - 230 hp | 2016 - 2024 |
| VOLKSWAGEN | Tiguan Allspace (BW2, BJ2) | CXDA, DGUA, DGVA, DNJA, DNLA, DNNA, DTEA | 180 - 220 hp | 2017 - |
| VOLKSWAGEN | Touareg (CR7, RC8) | CYRC | 249 hp | 2018 - 2023 |
| VOLKSWAGEN | Touran (5T1) | CJSA | 180 hp | 2015 - 2018 |
OEM part number: 06K 103 383 E, 06K 103 383 K, 06L 103 383 B.
Important: the gaskets on this page are listed for the third-generation EA888 engines of the vehicles in the survey below. For any other vehicle, read the engine code first before ordering, as the bore has to match.
Why switch to a reinforced gasket?
Once the original gasket reaches its limit, the reinforced gasket takes over: under higher combustion pressure it keeps its shape instead of settling.
On an engine that is already turbocharged, raising the boost or the tune puts the head gasket under strain first. A reinforced gasket rules out the leak, and the head removal that follows it, a job far dearer than the part itself.
-
Brand
-
ReferenceWC4978-045
-
In stock1 Item


