Skip to content
  • On order
Reinforced head gasket Mercedes M120.AMG M297 - C4504-051 Reinforced head gasket Mercedes M120.AMG M297 - C4504-051

Reinforced cylinder head gasket Mercedes-Benz M120.AMG M297 V12 7.3L

€406.21 (tax incl.)
€541.61 (tax incl.) -25%

Reinforced Cometic head gasket in multilayer MLS for the Mercedes-Benz 7.3-litre V12 engine, one part number per cylinder bank.

  • Engines: M120.AMG M297
  • Bore: 91.5 mm
  • Thicknesses: 0.69 to 3.56 mm
C4504-051
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Mercedes-Benz engines covered

The V12 petrol engine of 7.3 litres with 48 valves, the Mercedes-Benz M120.AMG, powers the SL 73 AMG (R129), and the M297 the Pagani Zonda, in the version detailed below; the Cometic part numbers on this page are announced by the maker for the M120.AMG and M297.

Mercedes-Benz publishes neither the part number of the original gasket of these engines, nor its bore, nor its thickness, nor its construction. Each bank of six cylinders has its own head and gasket, sized for the standard pressure: as it climbs, the clamping load fades, the head lifts off the block and coolant passes into a cylinder.

Reinforced cylinder head gaskets

The head gasket does not seal on its own: the fasteners that press the Mercedes head onto the block count as much as it does. Above 100 N/mm², a composite gasket settles for good; the 301 stainless steel of MLS gaskets withstands up to 517 N/mm², 5 times more, and recovers its shape at every combustion.

This page gathers the part numbers of Cometic, an American maker of competition gaskets, under a single construction: MLS, a multi-layer steel design. The V12 needs two different gaskets, one per bank: C4503 for the right bank and C4504 for the left bank. They come in a 91.5 mm bore, and in thicknesses from 0.69 to 3.56 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually and for one cylinder bank only: one is needed on the right and one on the left.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
91.5 mm 0.69 mm 4.54 MLS Cometic C4503-027
91.5 mm 0.69 mm 4.54 MLS Cometic C4504-027
91.5 mm 0.76 mm 5.00 MLS Cometic C4503-030
91.5 mm 0.76 mm 5.00 MLS Cometic C4504-030
91.5 mm 0.91 mm 5.98 MLS Cometic C4503-036
91.5 mm 0.91 mm 5.98 MLS Cometic C4504-036
91.5 mm 1.02 mm 6.71 MLS Cometic C4503-040
91.5 mm 1.02 mm 6.71 MLS Cometic C4504-040
91.5 mm 1.14 mm 7.50 MLS Cometic C4503-045
91.5 mm 1.14 mm 7.50 MLS Cometic C4504-045
91.5 mm 1.30 mm 8.55 MLS Cometic C4503-051
91.5 mm 1.30 mm 8.55 MLS Cometic C4504-051
91.5 mm 1.42 mm 9.34 MLS Cometic C4503-056
91.5 mm 1.42 mm 9.34 MLS Cometic C4504-056
91.5 mm 1.52 mm 9.99 MLS Cometic C4503-060
91.5 mm 1.52 mm 9.99 MLS Cometic C4504-060
91.5 mm 1.68 mm 11.05 MLS Cometic C4503-066
91.5 mm 1.68 mm 11.05 MLS Cometic C4504-066
91.5 mm 1.78 mm 11.70 MLS Cometic C4503-070
91.5 mm 1.78 mm 11.70 MLS Cometic C4504-070
91.5 mm 1.91 mm 12.56 MLS Cometic C4503-075
91.5 mm 1.91 mm 12.56 MLS Cometic C4504-075
91.5 mm 2.03 mm 13.35 MLS Cometic C4503-080
91.5 mm 2.03 mm 13.35 MLS Cometic C4504-080
91.5 mm 2.13 mm 14.01 MLS Cometic C4503-084
91.5 mm 2.13 mm 14.01 MLS Cometic C4504-084
91.5 mm 2.18 mm 14.33 MLS Cometic C4503-086
91.5 mm 2.18 mm 14.33 MLS Cometic C4504-086
91.5 mm 2.34 mm 15.39 MLS Cometic C4503-092
91.5 mm 2.34 mm 15.39 MLS Cometic C4504-092
91.5 mm 2.49 mm 16.37 MLS Cometic C4503-098
91.5 mm 2.49 mm 16.37 MLS Cometic C4504-098
91.5 mm 3.05 mm 20.06 MLS Cometic C4503-120
91.5 mm 3.05 mm 20.06 MLS Cometic C4504-120
91.5 mm 3.56 mm 23.41 MLS Cometic C4503-140
91.5 mm 3.56 mm 23.41 MLS Cometic C4504-140

The gasket volume is the empty space it leaves above each Mercedes cylinder. It is added to the combustion chamber and reduces the compression ratio, the more so as it is large. Compare these values only between gaskets of the same bore.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts M120.AMG, M297 not published by the manufacturer

Before fitting, check with a straight edge that the Mercedes head and block faces are flat, and have any that need it resurfaced. Apply no gasket sealant: Cometic gaskets come already coated.

Technical guide

The construction offered

Cometic MLS cylinder head gasket MLS Cometic
Stainless steel layers, stamped and joined by rivets. The outer layers carry active beads around each Mercedes cylinder and each fluid passage. Moderate tightening is enough to seal and the bore distorts very little. This versatile construction ranges from the prepared naturally aspirated engine to moderate boost.

Choosing bore and thickness

Gasket bore. Cometic MLS comes in 91.5 mm: C4503 for the right bank and C4504 for the left bank.

Thickness. Mercedes-Benz discloses no thickness for the original gasket of this engine. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness unknown: take the measurement of the removed standard gasket and keep the nearest value offered
Skimmed cylinder head, make up the lost height The offered value closest to the figure taken on the removed standard gasket, plus the thickness taken off when resurfacing
Forced induction build, lower the ratio A thickness above the one measured on the removed standard gasket
Naturally aspirated build, raise the ratio A thickness thinner than that of the removed standard gasket, down to 0.69 mm, the lowest of the range

If you choose a thickness lower than the original, first measure with a dial gauge how far the pistons protrude above the Mercedes block face: this figure gives the clearance that remains between piston and head.

The brand

Cometic Cometic Gasket, Inc., founded in 1989 in Concord, Ohio, is a US company that designs gaskets and sealing solutions for engines. It became known for the made-to-measure gasket, cut to the bore and thickness required. All its manufacturing stays in the United States, using American materials.

Advantages over the original gasket

Criterion Original gasket: part number not published Reinforced gaskets
Construction Construction not stated by the manufacturer Multi-layer stainless steel (MLS)
Gasket bore not published 91,5 mm
Thicknesses available thickness not published by the manufacturer 0.69 to 3.56 mm, 18 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the bore of the original gasket, which Mercedes-Benz does not disclose covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Brand Model Engine code Power Years
Mercedes-Benz SL (R129) 73 AMG (129.076) M 120.AMG 525 hp 1999-2001

OEM part number: part number not published by the manufacturer.

Important: the part numbers on this page match the Mercedes-Benz M120.AMG and M297 engines: read the engine code of your vehicle, then check the bore, before you order.

Why switch to a reinforced gasket?

When the original gasket is no longer enough, the reinforced V12 gasket steps in: under higher combustion pressure it keeps its shape and is not crushed.

As soon as a turbo, a supercharger or a higher compression ratio comes into play, the Mercedes head takes more load and the gasket becomes the most exposed part of the top end. A reinforced gasket stops gas or coolant leaks, and the head removal that would follow.

16 other products in the same category

Viewed products

Loading...