Skip to content
  • On order
Reinforced inlet valves BMW M5 F10 M6 F13 S63B44B Reinforced inlet valves BMW M5 F10 M6 F13 S63B44B

Reinforced inlet valves BMW M5 F10 M6 F13 S63B44B

€519.50 (tax incl.)
€649.38 (tax incl.) -20%

Set of 16 reinforced inlet valves for BMW S63B44B (M5 F10, M6 F06 F12 F13).

  • Brand: SUPERTECH
  • Engine: S63B44B
  • Dimensions: 33.2 mm head, 6 mm stem
  • Material: black nitride stainless steel, single groove
BMIVN-1063S-16
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines covered

The S63B44B is BMW M's 4,395 cc twin-turbo V8, with direct injection, double VANOS and Valvetronic variable lift. It powers the M5 F10 from 2011 and the M6 F06, F12 and F13 from 2012, with 560 to 600 hp depending on version.

Up to 07/2015, its 16 inlet valves are BMW 11 34 7 609 941: 33.2 mm head, 6 mm stem, held by 3-groove collets 11 34 1 461 405. Boost raised by a remap exposes them to more heat and harder impacts.

SUPERTECH reinforced inlet valves

On the S63B44B, each inlet valve lets in the air squeezed by the two turbos and then closes the port again, tens of times per second once the V8 is wound up. On every closing its head comes back to strike the seat in the cylinder head, while its stem keeps shuttling through the guide without a break. Its working temperature spans 400 to 550 °C: in that zone the stock chrome-silicon alloy starts losing its footing, with 500 MPa at 500 °C, then 250 MPa around 600 °C, just above, hence 50 % less strength. Raising turbo pressure, lift or revs, or stiffening the springs, means hitting the part with more impacts, more friction and more temperature.

SUPERTECH makes these uprated parts out of forged chrome-nickel stainless intended for racing, a relative of EV8 (21-4N). This material retains 650 MPa at 500 °C, 30 % beyond the factory-supplied steel, and 550 MPa at 600 °C, 120 % beyond. A black nitride layer hardens the outside of the part and makes it slicker, so the stem rubs less and its wear in the guide is delayed.

They keep the standard size, 33.2 mm head and 6 mm stem, but with a single groove: with KPR-6S-7 collets gripping the stem, the groove carries far less load, for better hold at high revs and under heavy boost. No seat machining to a new size is required.

Inlet valve technical specification

Part numberBrandSizeHead Ø
OEM 33.2 mm
Stem Ø
OEM 6 mm
LengthGroovesMaterial
BMIVN-1063S-16 SUPERTECH Standard 33.2 mm 6 mm 93.7 mm 1 Black nitride stainless steel

BMIVN-1063S-16: to be fitted with KPR-6S-7 collets.

Fitting details

PartBMW originalReinforced
Collets 11 34 1 461 405 (3 grooves) KPR-6S-7 (1 groove)
Valve stem seals Kits 11 34 0 039 494 / 11 34 0 054 492 VSI-EC60E
Valve guide

The SUPERTECH valve has a single groove: it is fitted with the KPR-6S-7 collets, never with the original 3-groove collets.

The original size is kept: the inlet seats are checked and refreshed normally during the cylinder head rebuild.

Clearance is taken up hydraulically: no adjustment is needed after replacing the valves.

Technical guide

The brand offered

SUPERTECH SUPERTECH has spent over 30 years in San Jose, California, on valves and valvetrains for racing engines; each model is designed around one specific engine, inspected through ultrasound, radiography and laser, and refined with tuners for drag strip or track use.

When reinforced valves become necessary

  • Wilder cams or firmer springs fitted
  • Rev band extended further upwards
  • Turbo pressure raised or larger turbos
  • Head prepared for track or racing use
  • Factory valves marked, tired or due for renewal at a rebuild

Compatible vehicles

ModelEngine codePowerYears
M5 (F10) S63B44B 560-568 hp 2011-2015
M5 Competition (F10) S63B44B 575 hp 2013-2015
M5 30th Anniversary (F10) S63B44B 600 hp 2014-2015
M6 (F06 / F12 / F13) S63B44B 560-568 hp 2012-2015
M6 Competition (F06 / F12 / F13) S63B44B 575 hp 2013-2015

OEM part number (inlet valve): 11 34 7 609 941

Important: these sets are intended for S63B44B engines built up to 07/2015; later engines use another original valve (11 34 8 605 662) and are not covered here.

Related products

When an S63 cylinder head is rebuilt, the exhaust valves are generally changed too, alongside the inlet ones. They are offered for this engine here:

BMW M5 F10 M6 F13 S63B44B exhaust valves →

11 other products in the same category

Viewed products

Loading...