Skip to content
  • In stock
ARP rod bolts PEUGEOT XU9J4 XU10J4 - ARP-117-6101 ARP rod bolts PEUGEOT XU9J4 XU10J4 - ARP-117-6101

Reinforced ARP bolts for OEM rods PEUGEOT CITROEN XU

€138.98 (tax incl.)
€163.50 (tax incl.) -15%

ARP 8740 connecting rod bolt and nut kit for OEM rods of the PSA sixteen-valve XU9J4 (1.9-litre) and XU10J4 (2.0-litre) engines.

  • Brand: ARP
  • Engines: XU9J4, XU10J4
  • Grade: 8740
ARP-117-6101
5 in stock in Europe (72h lead time)
Pay in installments

The PSA XU9J4 and XU10J4 engines concerned

This kit is for the sixteen-valve four-cylinders of PSA's XU family: the 1.9-litre XU9J4 (1,905 cm³, 147 to 160 hp), fitted from 1987 to 1993 to the Peugeot 309 GTI 16 and 405 Mi16 and to the sixteen-valve Citroën BX GTi, and the 2.0-litre XU10J4 (1,998 cm³, 126 to 158 hp), fitted to the Peugeot 306, 405, 406, 605 and 806, the Citroën Xantia, XM, ZX, Xsara and Evasion, the Lancia Zeta and the Xantia built by Saipa. The XU9J4Z, XU10J4Z and XU10J4R versions of the same blocks are covered.

The original rod bolts of these blocks, for which neither the reference nor the diameter is published, are replaced by this ARP kit, which the maker intends for the sixteen-valve XU engines of Peugeot and Citroën, the XU9J4 in 1.9 litres and the XU10J4 in 2.0 litres; its instruction sheet names the Peugeot 205 and 306.

Reinforced ARP bolts and nuts for connecting rods

Few parts of the bottom end work as hard as the rod bolt: at every revolution, it is what stops the cap from pulling away under the inertia loads of the rod and piston assembly. The original bolt is designed for stock power.

The ARP 117-6101 kit is made of 8740 steel. The instruction sheet recommends checking the bolt stretch, 0.178 to 0.19 mm, and gives the 61 Nm torque only when no stretch gauge is available. 8740 is a chrome-moly steel that ARP heat treats to 180,000 psi tensile strength, with threads rolled after heat treatment. As a reference point, standard engine fasteners mostly belong to classes 10.9 and 12.9, i.e. 150,800 to 176,900 psi minimum strength.

Technical specifications

Part numberBrandGrade / materialNutThreadUnder-head length
ARP-117-6101 ARP 8740 steel Not published Not published

According to the ARP instruction sheet, the bolts are pressed into the rods before the caps are fitted: the top of the rod bore must be chamfered to clear the radius under the bolt head.

Tightening torque and stretch

ReferenceTightening torqueStretch
ARP-117-6101 61 Nm 0.178 - 0.19 mm

For this part, ARP favours tightening to a measured stretch, the key to an exact preload; torque is given only when no gauge is available. The figures in the table assume ARP lubricant.

Source of the torque and stretch figures: ARP 117-6101 instruction sheet, in the revision applicable at publication. The manufacturer's instruction sheet prevails in the event of any difference. Read the ARP 117-6101 instruction sheet

Assembly is done without thread locker, as the ARP instruction sheet calls for none: ARP Ultra-Torque grease is applied to the threads of each bolt and to the bearing face of its nut.

According to the ARP instructions, the big ends must be checked and resized with the fasteners in place; plan a visit to a machine shop.

Measuring bolt stretch

Measuring the stretch of a rod bolt

Stretch measurement supplements torque tightening and gives the most accurate preload. It is done with the bolt in place: the gauge, fitted with a dial indicator, bears on both ends of the bolt and shows the stretch achieved, to be brought to the value in the table above. This avoids the variations caused by friction, which matters on a highly stressed engine.

Technical guide

All the torque and stretch values on this page assume ARP assembly grease on the bolt threads and on the bearing face of the nuts; engine oil does not replace it.

The ARP brand ARP

An engineer with an aerospace background, Gary Holzapfel launched ARP (Automotive Racing Products) in the early 1970s with one goal: to eliminate engine failures caused by weak fasteners in racing. ARP designs and manufactures thousands of part numbers in California, cylinder head, main and rod bolts, in several materials depending on the use, and has become known for the consistency of its manufacturing.

Vehicle compatibility

BrandModel (chassis)Engine codePowerYears
Peugeot 306 (7B, N3, N5) 2.0 RFV (XU10J4R) 132 hp 1997-2001
Peugeot 306 (7B, N3, N5) 2.0 RFV (XU10J4R) 135 hp 1997-2000
Peugeot 306 (7B, N3, N5) 2.0 S16 RFY (XU10J4Z) 152 hp 1994-2001
Peugeot 306 (7B, N3, N5) 2.0 S16 RFT (XU10J4) 150 hp 1994-2001
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 16V RFV (XU10J4R) 132 hp 1997-2001
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 16V RFV (XU10J4R) 135 hp 1997-2000
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 16V RFV (XU10J4R) 136 hp 1997-2001
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 S16 RFY (XU10J4Z) 152 hp 1993-2001
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 S16 RFT (XU10J4), RFY (XU10J4Z) 150 hp 1994-2001
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 S16 RFT (XU10J4), RFY (XU10J4Z) 151 hp 1994-1996
Peugeot 306 Hatchback (7A, 7C, N3, N5) 2.0 S16 RFT (XU10J4) 155 hp 1994-1995
Peugeot 306 Estate (7E, N3, N5) 2.0 RFV (XU10J4R) 132 hp 1997-2002
Peugeot 306 Estate (7E, N3, N5) 2.0 16V RFV (XU10J4R) 135 hp 1997-2002
Peugeot 306 Convertible (7D, N3, N5) 2.0 16V RFV (XU10J4R) 132 hp 1997-2002
Peugeot 306 Convertible (7D, N3, N5) 2.0 16V RFV (XU10J4R) 135 hp 1997-2002
Peugeot 309 II (3C, 3A) 1.9 GTI 16V DFW (XU9J4Z) 147 hp 1990-1993
Peugeot 309 II (3C, 3A) 1.9 GTI 16V D6C (XU9J4) 158 hp 1989-1990
Peugeot 405 I (15B) 1.9 4x4 D6C (XU9J4) 158 hp 1987-1992
Peugeot 405 I (15B) 1.9 Sport MI-16 D6C (XU9J4) 158 hp 1987-1992
Peugeot 405 I (15B) 1.9 Sport MI-16 DFW (XU9J4Z) 147 hp 1987-1992
Peugeot 405 I (15B) 1.9 SPort MI-16 4x4 DFW (XU9J4Z) 147 hp 1987-1992
Peugeot 405 I Estate (15E) 1.9 D6C (XU9J4) 158 hp 1987-1992
Peugeot 405 I Estate (15E) 1.9 4x4 D6C (XU9J4) 147 hp 1990-1992
Peugeot 405 I Estate (15E) 1.9 Four-wheel drive D6C (XU9J4) 158 hp 1987-1992
Peugeot 405 II (4B) 2.0 RFT (XU10J4) 158 hp 1997-1999
Peugeot 405 II (4B) 2.0 16V RFT (XU10J4) 150 hp 1994-1995
Peugeot 405 II (4B) 2.0 16V RFT (XU10J4) 155 hp 1992-1995
Peugeot 405 II (4B) 2.0 MI-16 RFY (XU10J4Z) 152 hp 1992-1995
Peugeot 406 (8B) 2.0 16V RFV (XU10J4R) 132 hp 1995-2004
Peugeot 406 Estate (8E/F) 2.0 16V RFV (XU10J4R) 132 hp 1996-2004
Peugeot 406 Coupe (8C) 2.0 16V RFV (XU10J4R) 132 hp 1997-2004
Peugeot 406 Coupe (8C) 2.0 16V RFV (XU10J4R) 135 hp 1999-2004
Peugeot 605 (6B) 2.0 16V RFV (XU10J4R) 132 hp 1994-1999
Peugeot 605 (6B) 2.0 16V (6BRFV2, 6BRFV9) RFV (XU10J4R) 135 hp 1994-1999
Peugeot 806 (221) 2.0 16V RFV (XU10J4R) 132 hp 1998-2000
Citroën BX (XB-_) 1.9 GTi (XB) D6C (XU9J4) 160 hp 1992-1993
Citroën BX (XB-_) 19 GTi 16V DFW (XU9J4) 147 hp 1988-1993
Citroën BX (XB-_) 19 GTi 16V D6C (XU9J4) 158 hp 1987-1988
Citroën EVASION MPV (22, U6) 2.0 16V RFV (XU10J4R) 132 hp 1998-2000
Citroën XANTIA (X1_, X2_) 2.0 16V RFV (XU10J4R) 135 hp 1998-2000
Citroën XANTIA (X1_, X2_) 2.0 16V RFV (XU10J4R) 126 hp 1995-2001
Citroën XANTIA (X1_, X2_) 2.0 i 16V RFY (XU10J4/Z) 152 hp 1993-1998
Citroën XANTIA (X1_, X2_) 2.0 i 16V RFT (XU10J4/Z) 150 hp 1994-1998
Citroën XANTIA (X1_, X2_) 2.0 i 16V RFV (XU10J4R) 132 hp 1995-2003
Citroën XANTIA (X1_, X2_) 2.0 i 16V RFT (XU10J4/Z) 157 hp 1996-1997
Citroën XANTIA Estate (X1_, X2_) 2.0 i 16V RFV (XU10J4R) 132 hp 1995-2003
Citroën XM (Y3) 2.0 i RFV (XU10J4R) 135 hp 1989-1994
Citroën XM (Y4) 2.0 i 16V RFV (XU10J4R) 132 hp 1994-2000
Citroën XM Estate (Y4) 2.0 i 16V RFV (XU10J4R) 132 hp 1994-2000
Citroën XSARA (N1) 2.0 16V RFV (XU10J4R) 132 hp 1998-2000
Citroën XSARA Estate (N2) 2.0 16V RFV (XU10J4R) 132 hp 1998-2000
Citroën XSARA Coupe (N0) 2.0 RFV (XU10J4R) 132 hp 1998-2000
Citroën ZX (N2) 2.0 i 16V RFY (XU10J4/Z), RFT (XU10J4/Z) 152 hp 1992-1994
Citroën ZX (N2) 2.0 i 16V RFT (XU10J4/Z) 150 hp 1994-1997
Citroën ZX (N2) 2.0 i 16V RFY (XU10J4/Z), RFT (XU10J4/Z) 155 hp 1992-1997
Lancia ZETA (22_) 2.0 16V (220AL5) RFV (XU10J4R) 132 hp 1998-2000
Saipa CITROEN XANTIA 2.0 XU10J4R 135 hp 1998-2010
Important: Only the sixteen-valve XU9J4 and XU10J4 engines, with their XU9J4Z, XU10J4Z and XU10J4R versions, of the vehicles in the table are covered by this listing; the XU10J4RS, the turbocharged XU10J4TE, the eight-valve XU5 and XU9JA and any other PSA engine are excluded.

Why is it the most cost-effective solution?

On a sixteen-valve XU that revs high, often built for track or rally use, the rod takes a pull on every cycle that the original bolt was not designed to withstand indefinitely. Replacing the bolts before they let go costs far less than rebuilding an engine.

Matching connecting rod bearings

Removing the connecting rods is the right time to replace their bearings: here are the ones that fit this engine.

Connecting rod bearings Peugeot Citroën XU9J4 XU10J4 →

  • Brand
    ARP
  • Reference
    ARP-117-6101
  • EAN13
    0672036019181

12 other products in the same category

Viewed products

Loading...