2.0L 16v - 4B11T

Information

Manufacturers

2.0L 16v - 4B11T

New Reduced price! View larger

Exhaust valve guides Mitsubishi Lancer Evolution X 4B11T

New product

Eight FERREA guides for the exhaust side of a Mitsubishi Lancer Evolution X, 4B11-T engine.

  • Brand: FERREA
  • Engines: 4B11-T
  • Material: copper bronze
  • Sizes: standard or +0.025 mm

More details

80,57 € tax incl.

-25%

107,42 € tax incl.

ORDER TODAY, WE SHIP IN 5 - 15 DAYS

  • Applicable Mitsubishi engines

    Here the subject is the exhaust of the 4B11 turbo, the supercharged 2.0-litre engine of the Lancer Evolution X, but also of the Lancer Ralliart and Sportback Ralliart.

    A cylinder head has eight exhaust-side guides, covered by a single Mitsubishi code, 1010A164, in oversize only. The FERREA ones offered here can be picked in standard or +0.025 mm.

    FERREA copper bronze exhaust valve guides

    Next to the burnt gases, the exhaust guide suffers the harshest temperatures. It lines the stem up with the seat, carries the heat built up in the valve towards the head and backs the stem seal. Once worn, the valve lies over, closes poorly and lets oil through: the tailpipe turns blue and compression pressure falls back.

    FERREA states that its copper-bronze alloy comes from the United States and receives an in-house heat treatment. The aim: shed heat better, hold up at temperature, delay wear and keep a lubricating film. Close-tolerance CNC cutting makes titanium or stainless steel valves workable. Eight guides make up this kit, the whole exhaust side of a head. It is often paired with reinforced valves.

    Valve guide technical specifications

    Part numberBrandMaterialSizeStem ØOutside ØLength
    VG1077*8FERREACopper bronzeStandard
    VG1078*8FERREACopper bronze+0.025 mm

    Valve guide installation

    PartOriginalReinforced
    Exhaust valve guide1010A164Replaced by the kit
    Inlet valve guide1010A164Inlet guide kit
    Stem sealsMN183952FERREA VS1024

    Technical guide

    Our brand

    FerreaSince 1978 the Florida company FERREA has developed valve train and cylinder head components for racing, machined in-house in Florida and then Argentina to very tight tolerances.

    Standard or oversize?

    Exhaust side offers two choices: standard, or enlarged by 0.025 mm, kept for guide seats already reworked, per the readings.

    When valve guides must be replaced

    • Exhaust smoking blue, stems worn or out of round
    • Race head whose valves have been replaced
    • Rally head refresh after a hard season
    • Full rebuild of the entire valve gear

    Vehicle compatibility

    ModelEngine codePowerYears
    Mitsubishi Lancer Evolution X (CZ4A)4B11-T280-340 hp2007-2016
    Mitsubishi Lancer Evolution X FQ-400 (CZ4A)4B11-T409 hp2009-2010
    Mitsubishi Lancer Evolution X FQ-440 (CZ4A)4B11-T446 hp2014
    Mitsubishi Lancer Ralliart (CY4A)4B11-T241 hp2008-
    Mitsubishi Lancer Sportback Ralliart (CX4A)4B11-T241-250 hp2008-

    OEM reference (exhaust valve guide): 1010A164 (4B11-T, oversize)

    Remember the inlet guides and valve stem seals

    Match them with new VS1024 (FERREA) stem seals, which correspond to the exhaust side.

    Inlet valve guides Mitsubishi Lancer Evolution X 4B11T →