Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
ELECTRONIQUE
Manufacturers
ELECTRONIQUE
Steel insert for EGT exhaust temperature sensor (K-sensor), threaded: 1/8" NPT.Made in France, machined with a significant thickness to facilitate welding and prevent thread deformation.
Bypass adapter / tee for probeInformation:Inlet and outlet: 6mm spline Bypass thread for probe: 1/8" NPT Material: aluminum Supplied with 1/8" NPT plug
AMP 2-way female connector/socket with terminals and sealing rings
AMP 3-way female connector/socket with terminals and sealing rings
AMP 4-way female connector/socket with terminals and sealing rings
AMP 6-way female connector/socket for ignition coil with integrated moduleSupplied individually with terminals, sealing rings and rubber boot
Brass T-fitting for 6mm diameter hose
Brass T-fitting for 8mm diameter hose
Brass Y-junction for 6mm diameter hose
EGT AEM probe for wideband AFR / EGT AEM WIFI
2-Way Plug/Connector for BOSCH EV6 Injector Often used when installing high-flow injectors and/or programmable management systems and/or (Sybele, AEM, etc.), this gasoline injector plug can also replace your existing plugs. original (in case of breakage or advanced aging). Although commonly used, this EV6 connector is not the most widespread, so we...
Fuel pressure sensor 0-7 bar or oil pressure sensor 0-10 bar, TORR sensor, 1/8"NPT thread
Ignition coil, integrated module, 4 x 1 output
Pressure sensor / MAP sensor GM 0-3 bars
MAP sensor GM 0-3 bar pressure sensor socket
7-way connector for MTR-04 ignition module
NGK RC-CR606 spark plug wire harnesses
NGK RC-CT406 spark plug wire harnesses
Nylon reducer diversion tee diameter 6-4-6mm
Replacement cable cap for INNOVATE XD-16, LMA-3, LC-1, and DL-32.
Stainless steel lambda sensor insert + steel plug. NSB CONCEPT. Fast shipping!
T tapping M10x100 tapered thread and 1/8" NPT bypass
Bypass tee for silicone hose internal diameter 4mm
TORR Oil Pressure Probe/Sensor 0-7 bar, 1/8"NPT thread
Oil Temperature Probe/Sensor TORR 60-150A deg C, 1/8"NPT Thread
TORR turbo pressure gauge from -1 (depression) to +3 bars (supercharging)
