Skip to content
  • On order
Reinforced head gasket Ford 2.3 OHC - C5369-040 Reinforced head gasket Ford 2.3 OHC - C5369-040 Reinforced head gasket Ford 2.3 OHC - C5369-040 Reinforced head gasket Ford 2.3 OHC - C5369-040

Reinforced cylinder head gasket Ford 2.3 OHC

€89.46 (tax incl.)
€119.28 (tax incl.) -25%

Reinforced Athena and Cometic head gaskets for the Ford 2.3 OHC engine.

  • Engines: 92Y, 99BT, A140, LL23, R23, L99A
  • Bores: 97.3 to 100.1 mm
  • Thicknesses: 0.69 to 3.05 mm
  • Replaces: D42E-6051-AC, 3593361
C5369-040
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Ford engines covered

The Ford 2.3-litre OHC petrol engine powers in particular the Pinto, Mustang II, Mustang, Fairmont, Granada, LTD, Thunderbird, Courier, Ranger and Aerostar in the compatibility table below, whose applications are those published by Cometic.

Two original gaskets are listed: D42E-6051-AC for the 92Y, 99BT, A140, LL23 and R23 engines, and 3593361 for the L99A. Ford publishes neither the bore, nor the thickness, nor the construction of these gaskets. They are calculated for the standard combustion pressure: when it rises, the clamping load fades, the cylinder head lifts off the block and coolant finds its way into a cylinder.

Reinforced cylinder head gaskets

The gasket does not make the seal on its own: it also depends on the fasteners that clamp the head against the block. A composite gasket crushes for good beyond 100 N/mm² of admissible stress, whereas the 301 stainless steel of MLS gaskets withstands 517 N/mm², 5 times more, and recovers its shape at every combustion. The O-Ring divides the roles differently: its stainless ring alone seals combustion, the body handles the water and oil circuits, and nothing needs machining in the block.

This page brings together the part numbers from two racing manufacturers, Athena and Cometic, in two constructions: O-Ring with a stainless ring for Athena and MLS multi-layer steel for Cometic. Gasket bores run from 97.3 to 100.1 mm and thicknesses from 0.69 to 3.05 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
OEM not specified
Brand Part number
OEM D42E-6051-AC (92Y, 99BT, A140, LL23, R23)
OEM 3593361 (L99A)
97.3 mm 1.02 mm 7.58 MLS Cometic C5369-040
97.3 mm 1.30 mm 9.67 MLS Cometic C5369-051
97.3 mm 1.52 mm 11.30 MLS Cometic C5369-060
97.3 mm 1.68 mm 12.49 MLS Cometic C5369-066
97.3 mm 1.91 mm 14.20 MLS Cometic C5369-075
97.3 mm 2.03 mm 15.09 MLS Cometic C5369-080
97.3 mm 3.05 mm 22.68 MLS Cometic C5369-120
99.6 mm 1.00 mm 7.79 O-Ring Athena 330132R
100.1 mm 0.69 mm 5.43 MLS Cometic C5709-027
100.1 mm 1.02 mm 8.03 MLS Cometic C5709-040
100.1 mm 1.30 mm 10.23 MLS Cometic C5709-051
100.1 mm 1.52 mm 11.96 MLS Cometic C5709-060
100.1 mm 2.03 mm 15.98 MLS Cometic C5709-080
100.1 mm 3.05 mm 24.00 MLS Cometic C5709-120

Gasket volume: the empty space remaining above each cylinder across the thickness of the gasket. It adds to the combustion chamber, so the larger it is, the lower the compression ratio. Compare these figures only between gaskets of the same bore.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts 92Y, 99BT, A140, LL23, R23, L99A not published by the manufacturer

Before installing the gasket, lay a straightedge across the head and the block to check flatness, then have the face that needs it machined flat. These gaskets go on without sealant: both Athena and Cometic deliver them already coated.

Technical guide

The two constructions offered

Athena O-Ring cylinder head gasket Athena O-Ring / Cut Ring
A steel plate covered with asbestos-free aramid fibre, with a stainless steel compression ring around each cylinder. The ring carries the clamping load onto a small diameter, exactly where the seal is made, while a silicone bead protects the water and oil passages. No other construction withstands such high pressures, and this is the only one suited to a head already fitted with a compression wire.
Cometic MLS cylinder head gasket Cometic MLS
Several stainless steel sheets, embossed, stacked and then riveted. The outer sheets show active beads around each cylinder and each fluid passage. Moderate clamping is enough to seal, and the bore distorts little. A versatile gasket, suited from the tuned naturally aspirated engine to moderate forced induction.

Choosing bore and thickness

Gasket bore. The Athena O-Ring comes in 99.6 mm (330132R), the Cometic MLS in 97.3 mm (C5369-040, C5369-051, C5369-060, C5369-066, C5369-075, C5369-080, C5369-120) and in 100.1 mm (C5709-027, C5709-040, C5709-051, C5709-060, C5709-080, C5709-120).

Thickness. Ford publishes no thickness for the original gaskets. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness unknown: measure the removed gasket and match its size to that of the gaskets offered, from 0.69 to 3.05 mm
Skimmed cylinder head, make up the lost height Between 0.69 and 3.05 mm, pick the thickness closest to that of the removed gasket, plus the metal taken off when resurfacing
Forced induction build, lower the ratio 3.05 mm to lower the ratio as far as possible, if the removed gasket measures less
Naturally aspirated build, raise the ratio 0.69 mm to raise the ratio as far as possible, if the removed gasket measures more

With no published original thickness, use a dial gauge to measure how far the pistons stand proud of the block deck, particularly if you choose 0.69 mm: it shows the clearance left between piston and head.

The two brands

Athena Athena S.p.A. is an Italian maker of gaskets and engine components, headquartered with its main plant in Alonte, in the Veneto region. It also produces in Spain, the United States, Brazil and India. Its multi-layer gaskets are fitted as original equipment by car makers, and its entire racing range is designed and built in Italy.
Cometic Cometic Gasket, Inc. was founded in 1989 in Concord, Ohio. This American maker of engine gaskets and sealing solutions owes its reputation to the made-to-measure gasket, cut to the bore and thickness required, and to production carried out entirely in the United States with local raw materials.

Advantages over the original gasket

Criterion Original gaskets D42E-6051-AC, 3593361 Reinforced gaskets
Construction Construction not specified by the manufacturer Multi-layer stainless steel, or steel and aramid fibre with a stainless ring
Gasket bore not published by the manufacturer 97.3 to 100.1 mm
Thicknesses available thickness not published by the manufacturer 0.69 to 3.05 mm, 14 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the bore of the gaskets offered, 97.3, 99.6 and 100.1 mm covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
Aerostar - - 1986-1987
Courier - - 1977-1982
Fairmont - - 1978-1983
Granada - - 1981-1982
LTD - - 1983-1986
Mustang - - 1979-1993
Mustang II - - 1974-1978
Pinto - - 1974-1980
Ranger - - 1983-1997
Thunderbird - - 1983-1988

OEM part number: D42E-6051-AC and 3593361.

Important: the part numbers on this page fit only the Ford 2.3-litre OHC engine of the applications in the compatibility table: check the bore of your engine before ordering, as the gaskets come in two bore families.

Why switch to a reinforced gasket?

Once the original gasket reaches its limits, the reinforced gasket steps in: under a higher combustion pressure it does not crush and keeps its geometry.

Turbo, supercharger or a raised compression ratio on the Ford 2.3-litre OHC engine: the head gasket is the first weak link of the top end. A reinforced gasket avoids the leak and the head removal that follows, a job far dearer than the part.

16 other products in the same category

Viewed products

Loading...