Skip to content
  • On order
Reinforced head gasket Volvo B19 B200 B21 - C4498-045 Reinforced head gasket Volvo B19 B200 B21 - C4498-045 Reinforced head gasket Volvo B19 B200 B21 - C4498-045 Reinforced head gasket Volvo B19 B200 B21 - C4498-045

Reinforced head gasket Volvo B19 B200 B21 2.0 2.1

€141.98 (tax incl.)
€189.30 (tax incl.) -25%

Reinforced Cometic head gasket, in multi-layer MLS. Sold individually, one gasket per engine.

  • Engines: Volvo 2.0 and 2.1 L, B19, B200 and B21 engines
  • Bore: 92, 92.5, 93 or 94.5 mm (MLS)
  • Thickness: 0.69 to 3.56 mm in 92 mm, 1.30 mm for the other bores
  • Replaces: 1 378 645-4
C4498-045
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Volvo engines covered

The B19A, B19E, B19ET, B200E, B200ET, B200F and B200K are 2.0 litre petrol engines; the B21A, B21E, B21F, B21FT and B21ET are 2.1 litre petrol engines. They power the Volvo 240, 260, 340-360, 740, 940 and 960 models listed in the compatibility table below.

The original gasket carries part number 1 378 645-4. Volvo publishes neither its bore, nor its thickness, nor its construction. Each engine takes one cylinder head gasket, sized for the standard combustion pressure; when that pressure climbs, the clamping force eases, the head lifts slightly and coolant seeps into a cylinder.

Reinforced cylinder head gaskets

Sealing does not rest on the gasket alone but also on the fasteners that press the head onto the block. Beyond 100 N/mm², a composite gasket compresses for good; the 301 stainless steel of MLS gaskets takes 517 N/mm², 5 times more, and recovers its shape at every combustion. Also check the condition of the head bolts and replace any that are stretched or damaged.

This page brings together 21 Cometic part numbers, from the American maker of competition gaskets, for a single construction: MLS, multi-layer steel. Four bores are offered: 92 mm (C4498), 92.5 mm (H2554SP4051S), 93 mm (H2554SP8051S) and 94.5 mm (H2554SP5051S). The 92 mm bore comes in 18 thicknesses from 0.69 to 3.56 mm; the other three come in 1.30 mm only. An engine takes a single gasket: order one part number. The thicknesses offered let you adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
OEM 1 378 645-4
92 mm 0.69 mm 4.59 MLS Cometic C4498-027
92 mm 0.76 mm 5.05 MLS Cometic C4498-030
92 mm 0.91 mm 6.05 MLS Cometic C4498-036
92 mm 1.02 mm 6.78 MLS Cometic C4498-040
92 mm 1.14 mm 7.58 MLS Cometic C4498-045
92 mm 1.30 mm 8.64 MLS Cometic C4498-051
92 mm 1.42 mm 9.44 MLS Cometic C4498-056
92 mm 1.52 mm 10.10 MLS Cometic C4498-060
92 mm 1.68 mm 11.17 MLS Cometic C4498-066
92 mm 1.78 mm 11.83 MLS Cometic C4498-070
92 mm 1.91 mm 12.70 MLS Cometic C4498-075
92 mm 2.03 mm 13.49 MLS Cometic C4498-080
92 mm 2.13 mm 14.16 MLS Cometic C4498-084
92 mm 2.18 mm 14.49 MLS Cometic C4498-086
92 mm 2.34 mm 15.56 MLS Cometic C4498-092
92 mm 2.49 mm 16.55 MLS Cometic C4498-098
92 mm 3.05 mm 20.28 MLS Cometic C4498-120
92 mm 3.56 mm 23.67 MLS Cometic C4498-140
92.5 mm 1.30 mm 8.74 MLS Cometic H2554SP4051S
93 mm 1.30 mm 8.83 MLS Cometic H2554SP8051S
94.5 mm 1.30 mm 9.12 MLS Cometic H2554SP5051S

A gasket's volume is the free space it leaves above each cylinder; it adds to the combustion chamber and lowers the compression ratio. Compare only gaskets of the same bore: 92, 92.5, 93 or 94.5 mm here.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts B19A, B19E, B19ET, B200E, B200ET, B200F, B200K, B21E, B21F, B21FT, B21A, B21ET not published by the manufacturer

Before reassembly, check the flatness of the head and block mating faces with a straightedge and have them resurfaced if needed. Cometic gaskets arrive already coated: do not apply any sealing paste. Also clean the gasket faces thoroughly before fitting.

Technical guide

The construction offered

Cometic MLS cylinder head gasket Cometic MLS
Several stainless steel sheets, stamped and riveted together. Each outer sheet carries active beads tracing the outline of every cylinder and fluid passage. A moderate clamping load is enough to seal, and the bore distorts very little. This versatile gasket suits anything from a tuned naturally aspirated engine to light boost. All the part numbers on this page are offered in this construction.

Choosing bore and thickness

Gasket bore. The Cometic MLS is offered in 92 mm (C4498), 92.5 mm (H2554SP4051S), 93 mm (H2554SP8051S) and 94.5 mm (H2554SP5051S, for the B21 engines only).

Thickness. No thickness is published for the original gasket 1 378 645-4. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published: measure the gasket you removed, then choose the offered value that matches it best
Skimmed cylinder head, make up the lost height The offered value nearest the removed gasket's thickness, plus the material taken off when the head or block was resurfaced
Forced induction build, lower the ratio A thickness greater than that of the removed gasket
Naturally aspirated build, raise the ratio A thickness smaller than that of the removed gasket, down to 0.69 mm, the thinnest value offered

To choose a thickness below the original, first use a dial gauge to read how far the pistons stand above the block face: that figure gives the clearance left between piston and head.

The brand

Cometic Cometic Gasket, Inc. is an American company founded in 1989 and based in Concord, Ohio, which designs and builds gaskets and sealing parts for engines. It earned its name with made-to-measure gaskets, cut to the bore and thickness required, all made in the United States from American materials. Its part numbers for these Volvo engines are offered here in four bores.

Advantages over the original gasket

Criterion Original gasket 1 378 645-4 Reinforced gaskets
Construction Construction not stated by the manufacturer Multilayer stainless steel (MLS)
Gasket bore not published 92, 92.5, 93 and 94.5 mm
Thicknesses available thickness not provided by the manufacturer 0.69 to 3.56 mm, 18 values in 92 mm; 1.30 mm for the other three bores
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the 92 to 94.5 mm bores of these gaskets covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
VOLVO 240 (P242, P244) 2.0 B19A 82 hp 09.1974-12.1975
VOLVO 240 (P242, P244) 2.0 B19A 90 hp 08.1976-07.1979
VOLVO 240 (P242, P244) 2.0 B19A 97 hp 09.1978-08.1983
VOLVO 240 Kombi (P245) 2.0 B19A 97 hp 08.1980-12.1984
VOLVO 240 Kombi (P245) 2.0 B19A 90 hp 08.1976-01.1982
VOLVO 340-360 (343, 345) 2.0 B19A 95 hp 08.1980-07.1983
VOLVO 340-360 (343, 345) 2.0 B200K 95 hp 08.1980-07.1983
VOLVO 340-360 (343, 345) 2.0 B19E 113 hp 08.1982-07.1984
VOLVO 340-360 (343, 345) 2.0 B19E 115 hp 08.1982-07.1984
VOLVO 340-360 Berline tricorps (344) 2.0 B19E 113 hp 08.1983-07.1984
VOLVO 740 (744) 2.0 GLE B19E 116 hp 04.1983-07.1984
VOLVO 240 (P242, P244) 2.0 B19ET 136 hp 10.1982-08.1984
VOLVO 240 Kombi (P245) 2.0 B19ET 136 hp 10.1982-08.1984
VOLVO 240 Kombi (P245) 2.0 T B19ET 144 hp 08.1983-05.1993
VOLVO 740 (744) 2.0 B19ET 150 hp 12.1983-07.1984
VOLVO 240 (P242, P244) 2.0 B200E 121 hp 09.1984-12.1993
VOLVO 240 Kombi (P245) 2.0 B200E 117 hp 08.1983-07.1993
VOLVO 340-360 (343, 345) 2.0 B200E 112 hp 08.1986-07.1988
VOLVO 340-360 (343, 345) 2.0 B200F 112 hp 08.1986-07.1988
VOLVO 340-360 (343, 345) 2.0 B200E 118 hp 08.1984-07.1986
VOLVO 340-360 Berline tricorps (344) 2.0 B200E 115 hp 08.1984-07.1986
VOLVO 340-360 Berline tricorps (344) 2.0 B200E 118 hp 08.1984-07.1986
VOLVO 740 (744) 2.0 B200ET 160 hp 01.1986-08.1990
VOLVO 740 (744) 2.0 B200ET 163 hp 01.1985-12.1985
VOLVO 740 Kombi (745) 2.0 Turbo B200ET 156 hp 09.1987-08.1990
VOLVO 740 Kombi (745) 2.0 Turbo B200ET 165 hp 05.1985-08.1987
VOLVO 740 Kombi (745) 2.0 Turbo B200ET 160 hp 05.1985-08.1987
VOLVO 240 (P242, P244) 2.0 B200F 111 hp 01.1990-12.1993
VOLVO 240 Kombi (P245) 2.0 B200F 111 hp 09.1988-12.1993
VOLVO 340-360 (343, 345) 2.0 B200F 109 hp 08.1988-07.1989
VOLVO 340-360 (343, 345) 2.0 B200F 110 hp 08.1987-07.1988
VOLVO 340-360 Berline tricorps (344) 2.0 B200F 109 hp 08.1988-07.1989
VOLVO 740 (744) 2.0 B200F 111 hp 09.1990-08.1992
VOLVO 740 Kombi (745) 2.0 B200F 112 hp 08.1989-07.1991
VOLVO 940 (944) 2.0 B200F 112 hp 01.1992-07.1994
VOLVO 940 Kombi (945) 2.0 B200F 112 hp 01.1992-07.1994
VOLVO 960 (964) 2.0 B200F 111 hp 09.1990-09.1993
VOLVO 240 (P242, P244) 2.0 B200K 103 hp 08.1984-07.1985
VOLVO 240 (P242, P244) 2.0 B200K 101 hp 08.1984-08.1989
VOLVO 240 Kombi (P245) 2.0 B200K 103 hp 08.1984-07.1985
VOLVO 340-360 (343, 345) 2.0 B200K 105 hp 08.1984-07.1987
VOLVO 340-360 Berline tricorps (344) 2.0 B200K 102 hp 08.1984-07.1990
VOLVO 340-360 Berline tricorps (344) 2.0 B200K 105 hp 08.1984-07.1987
VOLVO 740 (744) 2.0 B200K 103 hp 09.1988-08.1990
VOLVO 740 Kombi (745) 2.0 B200K 103 hp 09.1988-08.1990
VOLVO 240 (P242, P244) 2.1 B21E 124 hp 09.1975-12.1979
VOLVO 240 (P242, P244) 2.1 B21E 122 hp 08.1974-09.1983
VOLVO 240 Kombi (P245) 2.1 B21E 117 hp 01.1977-08.1978
VOLVO 240 Kombi (P245) 2.1 B21E 122 hp 08.1974-09.1983
VOLVO 260 (P262, P264) 2.1 B21E 124 hp 09.1979-12.1981
VOLVO 240 (P242, P244) 2.1 B21F 109 hp 09.1979-12.1984
VOLVO 240 Kombi (P245) 2.1 B21F 109 hp 08.1980-07.1984
VOLVO 240 Kombi (P245) 2.1 B21FT 165 hp 09.1980-12.1985
VOLVO 240 (P242, P244) 2.1 B21A 98 hp 09.1983-12.1984
VOLVO 240 (P242, P244) 2.1 B21A 102 hp 09.1975-12.1977
VOLVO 240 (P242, P244) 2.1 B21A 104 hp 09.1977-12.1978
VOLVO 240 (P242, P244) 2.1 B21A 97 hp 08.1974-07.1975
VOLVO 240 (P242, P244) 2.1 B21A 100 hp 08.1975-07.1980
VOLVO 240 (P242, P244) 2.1 B21A 107 hp 08.1980-07.1984
VOLVO 240 (P242, P244) 2.1 B21ET 156 hp 09.1980-12.1985
VOLVO 240 (P242, P244) 2.1 Turbo B21ET 155 hp 08.1980-07.1984
VOLVO 240 Kombi (P245) 2.1 Turbo B21ET 155 hp 08.1980-07.1985

OEM part number: 1 378 645-4.

Important: the part numbers on this page suit only the B19A, B19E, B19ET, B200E, B200ET, B200F, B200K, B21A, B21E, B21F, B21FT and B21ET engines: check your Volvo's engine code before ordering.

Why switch to a reinforced gasket?

When the original gasket is no longer enough, the reinforced gasket replaces it: under higher combustion pressure it keeps its shape instead of collapsing. For the Volvo models on this page, it is the answer as soon as the engine goes beyond its original output.

Whether you add a turbo, raise the compression ratio or rev higher with livelier cams, the cylinder head gasket becomes the weak link of a high-output engine. A reinforced gasket prevents the leak and the head removal that goes with it, far costlier than the gasket. On these Volvo engines, the reinforced gasket is the first item to address once you go beyond the original output.

16 other products in the same category

Viewed products

Loading...