Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
Categories
Manufacturers
Categories
Rear bushes 69mm POWERFLEX Performance reference PFR85-610
Known as the "IRESA silencer", here you will find the RC RACING ET113C-GA stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
High-quality Connecting rods forged PSA Xsara VTS ZX 306 S16 XU10J4RS (Connecting rods forged PSA Xsara VTS ZX 306) for reliable fitment and performance.
REDOX 9-part silicone water hose kit with clamps for BMW 320i (E36) 2.0 24V M50B20 09/1990-02/1998
Reinforced collar, diameter 131-139mm, in AISI 304 stainless steel
Forged pistons1.6 L 16v TU5J4/TU5JP4 (18 mm pin): Bores76-80mm, CR OEM12.0-13.1:1, volumes6.7-21.0 cc. COMPatibilities106 GTi/Saxo VTS, 206/307/1007, C2/C3, Xsara/Picasso, Berlingo/Partner.
J7R-752 (R21 Turbo) Forged Pistons O88/88.5, Pin 24, CH 38.7 40.5, Compression ratio 8.0 8.1. Table, engine compatibilities, vehicles and OEM info.
Straight aluminum reducer, outer diameters 60-50mm, length 80mm
Aluminium pipe external diameter 20mm, length 1 meter
kit of 2 three-hole steel flanges for weld-on fittings for 57mm diameter tubing, gasket and screws from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: kit 2 flanges 3 holes 57mm weld Information Flange material ST37 steel Gasket aluminum 5754 Dimensions see photo Delivered with.
57/60.5mm - POWERSPRINT stainless steel silencer, dual inlet/single outlet, weldable, body 220x140mm, length 450mm from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Universal stainless steel silencer POWERSPRINT weldable with pipes inner diameter 57mm and 60 5mm length 450mm body 220x140mm outer.
47/60.5mm - POWERSPRINT stainless steel silencer, dual inlet/single outlet, weldable, body 220x140mm, length 450mm from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Universal stainless steel silencer POWERSPRINT weldable with pipes inner diameter 47mm and 60 5mm length 450mm body 220x140mm outer.
Symmetrical conical stainless steel reducer, diameter 127-60.3mm, length 200mm, thickness 1.5mm
Flapper / Exhaust ValveInformation:Inner diameter: 63.5mmControl: by pressure / gas flowMaterials: stainless steelResistance temperature: -40A deg C / +650A deg COpen at rest
Gasket for 3-hole flange, 89mm diameter, 3mm thickness
Stainless steel 2-hole weld flange for 89mm diameter pipe, 8mm thicknessGeneric photo, flange sold individually
RC RACING intermediate pipe made of 304L stainless steel, with wide welds and tight tolerances, allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameters, manifold flange modifications, vehicle/competition specifications, etc.).Not road legal.
Known as the "IRESA silencer", here you will find the RC RACING ET345A-73 stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
WALBRO 255 __L/H high-flow fuel pump for PEUGEOT 306 2.0 Xsi 8/16v 1998-Replaces the original pump. Original fuel pump: ERJ237
MALPASSI Adjustable Fuel Pressure Regulator for BMW 535i (E34) 88-95For fuel-injected engines only. This pressure regulator is adjustable, allowing you to increase your engine's performance. It installs in place of the original part.Image for illustrative purposes only
Hard silent block insert Powerflex PerformaNCe for upper right engine mount for RENAULT
Reinforced engine mount VIBRA-TECHNICS Sport part number FOR21MPrice for one mount
High impedance fuel injector clinic 365cc, 53mm length, 14mm fuel rail diameter, 15mm intake manifold diameter, EV6 connector (USCAR)
Muffler pipe stainless steel RC RACING for SEAT LEON 2.0 TFSI BWJ 240cv 11/2006 - 05/2011
RC RACING Group N silencer made of 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, manifold flange modification, vehicle/competition specifications, etc.).Not road legal.
BREEZY 235mm 13-row matrix oil cooler kit, DASH10 male connections with 85A deg C MOCAL thermostatic sandwich plate
REDOX silicone coupling sleeve, 11mm inner diameter, 76mm length
Silicone reducer 90A REDOX, internal diameters 67-76mm, length 125x125mm
45A silicone elbow, REDOX, 11mm inner diameter, 100x100mm length
COOL IT Clamp-on Thermal Insulation 15.24 x 60.96cm for PipeReduces heat transfer (blocks 95% of radiant heat).Generic Photo
COOL IT Generation 2 Copper Thermal Insulation Tape for ExhaustReduces heat loss, providing several advantages:Limits the temperature in the engine compartmentReduces the risk of combustion of components near the exhaustThe heat flow is optimized: better exhaust gas evacuation and therefore better efficiencySpecifications:Width: 50.8mm (2")Length: 15.24m...
FERREA Exhaust Valve 33x5.96x104.75mm (+1mm) Competition More, reference F1519P - Sold individually Technical Specifications:
Large format MOCAL sandwich plate
M8x125 Stainless Steel Bleed ScrewThread: M8x125 Material: Stainless Steel Image for illustrative purposes only
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B603H
Crankshaft ACL side bearings for NISSAN 200SX S14 SILVA S15 SR20DET
Goodridge braided brake hose kit for Peugeot RCZ, all models except "R" version
Dummy aluminum hose nut for DASH 10 hose, red hose clamp, for 200 Series Dash 10 hose
RC RACING stainless steel intake manifold with lambda sensor port for PEUGEOT 205 GTI 1.9 Catalytic Converter 122hp 105hp
SAFFA Reinforced Clutch Mechanism for PEUGEOT 405 Mi16, 1.9 16V engine from 1988 to 1992For 215mm diameter discPull-type clutchThe reinforced mechanisms have the same dimensions and tolerances as the standard series, but with increased pressure plate and damping tabs Reinforced. Photo not contractual
Modine silicone REDOX hose for water/oil heat exchanger for PEUGEOT 205 Automatic from 1986 to 1995. Supplied with hose clamps.
SAFFA rigid sintered metal reinforced clutch disc with 4 pads for PEUGEOT 306, 2.0 16V engine from 1999 to 2001Technical Information:Diameter: 215mmNumber of splines: 18 Disc compatible with original mechanism but caution Your original mechanism will wear out faster than a reinforced mechanism.
Reinforced head gasket Athena / Cometic forVAG 1.4 TSI EA111 EA211:AUDI A1 8X 2010-2018AUDI A3 8P 8V 2007-2013AUDI A4 B9 2015-2019SEAT Ibiza / Cupra 6J 2009-2017SEAT Leon 1P 5F 2007-2020VW Golf 5 2005-2013VW Golf 6 2008-2016VW Golf 7 2012-2021VW New Beetle 2011-2016VW Polo / GTI 6R 2010-2017VW Scirocco 3 2008-2017
FERODO DS2500 brake pads, reference FCP1562H
Cylinder head gasket ATHENA bore 85.3mm FIAT 1.4 146A8 1.6 159A3 LANCIA 2.0 8V 16V HF
SAFFA Reinforced Clutch Disc, Reference EMB-6104Technical Information:- Diameter: 240mm- Disc: Rigid- Pads: 6 sintered metal pads- Hub: 24.1 x 21.8 x EV- Splines: 23
CITROEN Saxo with airbag Hub flywheel OMP. NSB CONCEPT. Fast shipping!
OMP Steel Upper Front Strut Brace for Volvo 850 2.0 20V / Turbo 20V
RC RACING 4-in-1 stainless steel manifold screw kit (2 screws) for VOLKSWAGEN POLO 1.4 8V 00-
4-into-1 manifold with stainless steel connecting pipe from RC RACING, manufactured from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameters, manifold flange modifications, vehicle/competition...
RC RACING stainless steel intermediate pipe made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifications, etc.).NOT APPROVED...
Known as "inter IRESA", here you will find the RC RACING TI-01BS stainless steel exhaust mid-pipe, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
Known as the "IRESA silencer", here you will find the RC RACING ET244-73 stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
KING RACE side bearings, reference: TW 133AM
bearings lateraux KING RACE NISSAN 350Z 3.5 VQ35of. NSB CONCEPT. Fast shipping!
Crankshaft side bearings King Racing for NISSAN 200SX S14 SILVA S15 SR20DET
