Skip to content
  • In stock
Forged connecting rods Audi - 2.5L 20V TFSI - EA855 22 mm pin (TT RS / RS3) for forged pistons Forged connecting rods Audi - 2.5L 20V TFSI - EA855 22 mm pin (TT RS / RS3) for forged pistons Forged connecting rods Audi - 2.5L 20V TFSI - EA855 22 mm pin (TT RS / RS3) for forged pistons Forged connecting rods Audi - 2.5L 20V TFSI - EA855 22 mm pin (TT RS / RS3) for forged pistons

Forged connecting rods Audi - 2.5L 20V TFSI - EA855 22 mm pin (TT RS / RS3) for forged pistons

€729.60 (tax incl.)
€912.00 (tax incl.) -20%

Kit of 5 ZRP and Boostline 4340 forged connecting rods for the Audi 2.5 TFSI EA855 (22 mm piston pin).

  • Brands: ZRP (I-HD), Boostline (I-3P)
  • Compatibility: TT RS 8J, RS3 8P, RS Q3 8U
  • Engine codes: CEPA, CEPB, CTSA, CZGA
  • Bolts included: ARP 2000, L19 or CA625+
R-AUD-010-I-5
27 in stock in Europe (72h lead time)
Pay in installments

The Audi 2.5 TFSI EA855 engine

The 2.5 TFSI (engine code EA855) is a 2,480 cc inline five-cylinder with turbocharging and direct injection, launched by Audi in 2009 in the TT RS (8J). A direct descendant of the five-cylinders that built Audi's rally legend, it stands out for its 1-2-4-5-3 firing order and unmistakable soundtrack. With a twin-cam 20-valve head and a sturdy cast-iron block, its architecture was designed to withstand high boost pressures.

Also fitted to the RS3 (8P) and RS Q3 (8U), it produces 310 to 360 hp in stock form and has repeatedly won its class at the International Engine of the Year awards. Its strong torque and high tuning potential make it a favourite platform for performance builds; in return, the stock rotating assembly becomes the weak link as soon as power climbs, which is why race-grade forged connecting rods are worthwhile.

Forged connecting rods

Forged and then machined from high-strength 4340 steel, these rods secure the bottom end as soon as power moves beyond standard. They become unavoidable when fitting forged pistons, raising the rev limit, increasing boost pressure or adding displacement, all cases where the standard EA855 rod, with its 22 mm pin and its 144 mm centre-to-centre length, reaches its endurance limit.

Designed for built engines, turbocharged as well as supercharged, they cover every discipline: rally, drift, drag racing, circuit and track use, hillclimb, time attack. They support Stage 2, Stage 3 and Stage 4+ builds, up to a fully rebuilt competition engine, and take the sustained rpm of racing in their stride.

Technical specifications of the EA855 forged connecting rods (22 mm pin)

ReferenceBrandProfileBoltsPin ØSmall-end widthBig-end ØBig-end widthCenter-to-centerWeight/rodOil hole
VW5670-866 Boostline I-3P ARP 2000-3/8"-38mm 22 mm 50,6 mm 144 mm 614 g No
VW5670-866+ Boostline I-3P ARP CA625+-3/8"-38mm 22 mm 50,6 mm 144 mm 614 g No
R-AUD-010-I-5 ZRP I-HD ARP 2000-3/8"-38mm 22 mm 50,6 mm 21,9 mm 144 mm 492 g No
R-AUD-010-I-5-L19 ZRP I-HD ARP L19-3/8"-38mm 22 mm 50,6 mm 21,9 mm 144 mm 492 g No

ZRP: Straight, non-tapered pin end.

Torque and bolt stretch

RodBoltsTorqueRecommended stretch
Boostline (VW5670-866) ARP 2000 75 N·m 0,130–0,140 mm
Boostline (VW5670-866+) ARP CA 625+ 115 N·m 0,170–0,180 mm
ZRP (R-AUD-010-I-5) ARP 2000 61 N·m 0,140–0,152 mm
ZRP (R-AUD-010-I-5-L19) ARP L19 67,8 N·m 0,152–0,165 mm

Rod preload cannot be corrected afterwards: once the engine is closed up, no inspection and no re-torque is possible, and there is no post-run-in retightening as there is on a head gasket. Everything is decided at assembly, which is what justifies the discipline required on the EA855: read the line of the table above matching the grade actually installed, ARP 2000 or ARP L19, and apply the bolt manufacturer’s value without rewording it. Torque helps you approach the target, but it splits the effort between friction and tensioning; it is stretch measured with a dial gauge that confirms the preload obtained, and it is the only check that will still be available later, once the engine is together. Clean threads, an even film of ARP assembly lubricant, tightening in alternating stages across the ten bolts. The kit instruction sheet is the final reference.

Technical guide

4340 forged steel: what is it?

4340 steel is a nickel-chromium-molybdenum alloy steel used in aerospace and motorsport alike. Forged then heat-treated (quench and temper), it offers excellent tensile strength, high fatigue resistance and real ductility. Compared with an original rod (often sintered/powder metal, optimised for series-production cost), a 4340 forged rod shows roughly +19% higher yield strength, +8% higher tensile strength and above all +19% to +37% higher fatigue strength, i.e. a fatigue life under cyclic loading several times longer. This is what makes forged 4340 the reference material as soon as boost and rpm climb.

Connecting rod profiles

I-HD profile. The Heavy Duty version of the I profile, this rod keeps the same architecture but with a thicker, reinforced beam, sized to withstand much higher loads. It targets the extreme loads of high-power builds running high boost pressure, whether turbocharged, supercharged or on nitrous oxide.
I-3P profile (Boostline). With its three pockets patented by Boostline, this section brings together the strengths of H and I profiles: it aims for maximum strength while limiting rotating mass. Boostline reserves it for boosted engines, including under high boost pressure, whether with a turbocharger, a supercharger or nitrous oxide injection.

Drilled body or solid body: the rods on this page come with an oil hole (rifle drilled), a solution we recommend up to around 600 hp, where the oil passage does not penalise the strength of the beam. Beyond that 600 hp mark we point customers towards rods without an oil hole: the solid body, with no through drilling, keeps its full section and offers maximum strength.

How to choose your rod bolts?Logo ARP

The rod bolt works in pure tension at the end of every cycle: in practice it is what limits the rpm and the cylinder pressure the engine can accept. The choice is therefore made from real use rather than from a catalogue, according to the target power per cylinder, the working rpm and the type of load (low-rpm torque in rally, sustained rpm on circuit, brutal peaks in drag racing). On this 2.5 TFSI five-cylinder the three grades below are offered in 3/8"-38 mm; whichever grade you choose, the tightening torque and the bolt stretch must be followed exactly.

Vis de bielle forgée ARP2000 ARP 2000, with a tensile strength of ~220,000 psi (~1,517 MPa), matches everyday competition use: up to 200 hp per cylinder in 3/8" and up to 8,500 rpm, which covers the vast majority of Stage 2 and Stage 3 EA855 builds. It is the grade found in circuit racing and track days, in drift, rally, drag racing and hillclimb, on ZRP I-HD rods as well as on the 144 mm Boostline I-3P. No particular storage constraint: fit it, check the stretch and forget it.
Vis de bielle forgée ARP L19 L19 raises the bar to ~260,000 psi (~1,793 MPa), good for up to 250 hp per cylinder in 3/8" and up to 10,000 rpm. On a 2,480 cc five-cylinder running very high boost pressure, with high cylinder pressure and sustained high rpm, this is the grade that gives the necessary margin: drag, drift, rally and high-power circuit work. In return, the alloy is sensitive to corrosion and to hydrogen embrittlement: the bolts must be stored and fitted oiled, away from moisture, and never left bare on the workshop shelf.
Vis de bielle forgée ARP CA625+ CA625+ (Custom Age 625+) is ARP’s premium alloy: 260,000 to 280,000 psi (~1,793 to 1,931 MPa). It is aimed at the most extreme builds, beyond 250 hp per cylinder in 3/8" and beyond 10,000 rpm, typically a drag or time attack EA855 whose working rpm never drops. It withstands atmospheric corrosion and oxidation better than ARP 2000 and remains immune to hydrogen embrittlement: you get the level of the L19 without its storage constraints. On this listing it equips the Boostline I-3P.

Measuring bolt stretch

Mesure de l'allongement d'une vis de bielle forgée à la jauge ARP

In addition to torque tightening, measuring rod-bolt stretch is the most reliable check for optimal preload. The check is done with the bolt fitted: place the gauge (dial indicator) on the two ends of the bolt and read its actual stretch, which must match the recommended value (see the torque & stretch table above). This method removes the friction variations inherent in torque tightening and secures the assembly on heavily stressed engines.

Buy the ARP stretch gauge →

The brands offered

BOOSTLINE (Wiseco group), a forged connecting rod range from the American Wiseco group, a benchmark since 1941. Its patented 3-pocket design combines the rigidity of an I-beam with the robustness of an H-beam. Forged from 4340 steel and machined in the USA, they come with ARP 2000 bolts (Custom Age 625+ optional) and are built for boosted engines.
ZRP, a Greek brand of high-performance forged connecting rods, designed by Alex Drakos in Athens. Each rod is forged from 4340 steel, precision-machined and balanced to ±1 g to stay reliable at high rpm. Available in I-beam or H-beam profile with ARP 2000, L19 or Custom Age 625+ bolts, they are designed and inspected in Greece, and proven in rally, on circuit and in drift.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the Audi 2.5 TFSI EA855 engine

These forged connecting rods fit the following Audi 2.5 TFSI engines (22 mm piston pin):

MakeModel (chassis)Engine codePowerYears
Audi TT RS (8J) CEPA 340 hp 2009–2014
Audi RS3 (8P) CEPA 340 hp 2011–2012
Audi TT RS Plus (8J) CEPB 360 hp 2012–2014
Audi RS Q3 (8U) CTSA 310 hp 2013–2015
Audi RS Q3 (8U) CZGA 340 hp 2015–2018

Why it’s the most cost-effective solution?

Bottom-end damage never stops at the rod: when a standard rod on a 2.5 TFSI breaks, bends or scores, the matching piston is usually scrap as well. Going back to the factory configuration therefore means buying both rods and pistons, and the bill climbs fast for what is only a return to standard.

For an equivalent, often lower budget, a set of 4340 forged steel rods combined with forged pistons changes the nature of the bottom end: far greater reliability and safety margin, plus real room to increase power instead of starting again from scratch. This is what European engine builders have been doing for more than 15 years on boosted five-cylinders.

For the same budget the maths is simple: more reliability, more potential, more service life.

11 other products in the same category

Loading...