Skip to content
  • On order
Reinforced inlet valves SUBARU EJ25D Reinforced inlet valves SUBARU EJ25D

Reinforced inlet valves SUBARU EJ25D

€246.12 (tax incl.)
€307.64 (tax incl.) -20%

Set of 8 reinforced inlet valves for SUBARU EJ25D (Legacy II, Legacy Outback, Forester SF).

  • Brand: SUPERTECH
  • Engine: EJ25D (2.5 16V)
  • Dimensions: 36 mm head, 5.96 mm stem
  • Material: black nitride stainless steel
SIVN-1016-8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

SUBARU engines covered

The EJ25D is Subaru's first 2.5 litre 16 valve boxer four. From 1995 to 2002 it powers the Legacy II saloon and estate, the Legacy Outback and the first Forester, with 150 to 167 hp.

It has 8 inlet valves, two per cylinder. More revs, sharper camshafts or a turbo added to this naturally aspirated engine put them through far more heat and impact than factory use.

SUPERTECH reinforced inlet valves

On every camshaft turn the inlet valve opens to fill the cylinder, then drops back and strikes its seat while the stem slides in the guide. Its service temperature runs from 400 to 550 °C. Ordinary chrome-silicon steel copes less well there: 500 MPa at 500 °C, but only 250 MPa at 600 °C, half as much, so 50 % less. Any rise in revs, lift or boost speeds up this wear.

For the EJ25D, SUPERTECH uses a race quality chrome-nickel stainless steel close to EV8 (21-4N), keeping 650 MPa at 500 °C (30 % more than the original steel) and 550 MPa at 600 °C (120 % more). Black nitriding hardens the surface and makes the stem slide more freely in the guide, limiting wear on both.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
SIVN-1016-8 SUPERTECH 36 mm 5.96 mm 105.9 mm Black nitride stainless steel

SIVN-1016-8: set of 8 valves, 6.2 mm stem tip.

Fitting details

PartSUBARU originalReinforced
Collets
Valve stem seals
Valve guide

No reinforced collets, valve stem seals or valve guides are listed for the EJ25D: the original Subaru parts are refitted, preferably new.

The SUPERTECH valve measures 36 mm across the head, 5.96 mm at the stem and 105.9 mm overall, with a 6.2 mm stem tip.

Technical guide

The brand offered

SUPERTECH Established in San Jose, in Silicon Valley, SUPERTECH has focused for around thirty years on valvetrain parts for racing. Its valves come from a drawing specific to each engine, go through ultrasonic, X-ray and laser checks, then are refined with competition engine builders.

How to choose

One part is sold for the EJ25D: its material and finish, more than its size, set it apart from the valve Subaru fitted at the factory on this engine.

CriterionOption offered
Finish Black nitride stainless steel
Racing stainless steel that holds up well to heat; black nitriding protects the stem against wear in the guide.

When reinforced valves become necessary

  • Higher lift camshafts, stiffer valve springs
  • Red line moved up
  • Turbo or supercharger added to the EJ25D
  • Cylinder head redone for circuit racing, rallies or hill climbs
  • Tired or pitted original valves, or reground seats

Compatible vehicles

ModelEngine codePowerYears
Legacy II (BD) 2.5 4WD EJ25D 167 hp 1995-1999
Legacy II (BD) 2.5 i 4WD EJ25D 150 hp 1996-1999
Legacy II Estate (BG) 2.5 4WD EJ25D 167 hp 1995-1999
Legacy II Estate (BG) 2.5 i 4WD EJ25D 156 hp 1996-1998
Legacy II Estate (BG) 2.5 i 4WD EJ25D 150 hp 1996-1998
Legacy II Estate (BG) 2.5 i EJ25D 150 hp 1997-1999
Legacy Outback (BG) 2.5 EJ25D 150 hp 1996-1999
Legacy Outback (BG) 2.5 EJ25D 156 hp 1996-1998
Forester (SF) 2.5 AWD EJ25D 167 hp 1997-2002
Important: one set of 8 fits a complete engine. The longer valves of the single camshaft EJ251 and EJ253, and those of the EJ255 and EJ257 turbo engines, are different parts and are not covered here.

Don't forget the head gasket

Removing the head to change the valves means a new gasket at refitting; a reinforced head gasket suited to the EJ25D is available in our shop:

Reinforced head gasket Subaru EJ22E EJ25D →

16 other products in the same category

Viewed products

Loading...