Skip to content
  • On order
Reinforced inlet valves SUPERTECH BMW M20B25 Reinforced inlet valves SUPERTECH BMW M20B25

Reinforced inlet valves SUPERTECH BMW M20B25

€165.72 (tax incl.)
€207.16 (tax incl.) -20%

Set of 6 reinforced inlet valves for BMW M20B25.

  • Brand: SUPERTECH
  • Engine: M20B25
  • Dimensions: 42 mm or 43 mm head, 7 mm stem
  • Material: stainless steel, 3 grooves
BMIVN-1085-6
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines covered

The M20B25 is the 2.5 litre, 12-valve, single overhead camshaft inline six-cylinder petrol engine of the BMW 325i and 325iX E30 (saloon, Touring, convertible), of the 525i E34 and of the Z1.

It has 6 inlet valves, BMW part number 11 34 1 706 631 or 11 34 1 708 895: 42 mm head, 7.0 mm stem, 102.5 mm length, held by 3-groove collets and operated by rocker arms with adjusting eccentrics. Designed for the standard engine, they reach their limits with a sharper camshaft, firmer springs, higher revs or forced induction.

SUPERTECH reinforced inlet valves

As the M20B25 climbs the rev range, every inlet valve clears the port and closes it once more, dozens of times before one second has passed. At the end of each opening its head drops sharply onto the seat face, while its stem never stops travelling up and down its guide. The whole assembly runs between 400 and 550 °C, a band where the original chrome-silicon steel has already lost its vigour: 500 MPa at 500 °C, then 250 MPa near 600 °C, one notch higher, so 50 % of strength gone. Sharper valve timing, stiffened springs, a raised rev limit or a turbo: each one adds knocks, friction and heat on the valve.

SUPERTECH produces these uprated parts in forged chrome-nickel stainless steel, cut out for racing and close to EV8 (21-4N). At 500 °C it holds 650 MPa, 30 % over the series-built steel; at 600 °C, still 550 MPa, 120 % over. Their black nitride finish gives a hardened and polished skin, which lets the stem slide with less resistance and wear more slowly in the guide.

The kit also comes in +1 mm oversize: the head grows from 42 to 43 mm, while stem and length keep their factory values. The seat then offers a wider passage, the cylinder draws a bigger charge and output rises, if the head's seat faces are recut to this diameter.

Inlet valve technical specifications

Part numberBrandSizeHead Ø
OEM 42 mm
Stem Ø
OEM 7 mm
Length
OEM 102.5 mm
GroovesMaterial
BMIVN-1084-6 SUPERTECH Standard 42 mm 7 mm 102.5 mm 3 Black nitrided stainless
BMIVN-1085-6 SUPERTECH +1 mm 43 mm 7 mm 102.5 mm 3 Black nitrided stainless

Valve fitting

PartBMW originalReinforced
Valve collets 11 34 1 307 136 (3 grooves) KPR-VW7-T (3 grooves)
Valve stem seals Kit 11 34 9 059 172
Valve guide Inner Ø 7.0 mm

SUPERTECH pairs its 3-groove valves with its KPR-VW7-T collets; new collets are recommended on reassembly.

The +1 mm oversize fits a cylinder head whose seats have been cut to the diameter of the new head, a job to plan with the cylinder head rebuild.

The M20B25 has rocker arms with adjusting eccentrics: after replacing the valves, check the clearance and set it with the eccentrics.

Technical guide

The brand offered

SUPERTECH SUPERTECH has been developing valvetrain parts made to win in San Jose, California, for over 30 years. Each of its valves is thought out engine by engine, probed by ultrasound, X-rayed and laser-checked before tuners prove it on drag strips and circuits.

How to choose

Every valve in this kit has 3 grooves, like the BMW ones, and the collets sit the same way; all that is left is to pick the size, meaning the head diameter.

CriterionOption 1Option 2
Size Standard size
42 mm head, the factory one: for heads with inlet seat faces that have always kept their original size.
+1 mm oversize
43 mm head: wider seat, better cylinder breathing and more power (about 10 to 12 cfm per mm of head). Those seat faces must then be recut, preferably while the ports get opened up too; this size also serves to recover reground seats.

When reinforced valves become necessary

  • Sharper cam profile, punchier springs
  • Rev ceiling raised higher
  • Forced induction added, turbo or supercharger
  • Cylinder head built for track, drift or rally
  • Stock valves damaged, tired or recut to repair size

Vehicle compatibility

ModelEngine codePowerYears
325i (E30) M20B25 170-171 hp 1983-1991
325i Touring (E30) M20B25 170 hp 1987-1993
325i Convertible (E30) M20B25 170-171 hp 1985-1993
325iX (E30) M20B25 170-171 hp 1986-1991
325iX Touring (E30) M20B25 170 hp 1988-1993
525i (E34) M20B25 170 hp 1988-1990
Z1 2.5 M20B25 170 hp 1988-1991

OEM part number (inlet valve): 11 34 1 706 631 ; 11 34 1 708 895

Important: these valves do not fit the M20B20, whose inlet head is 40 mm.

Don't forget the exhaust valves

When an M20B25 head is rebuilt, replacement exhaust valves usually go in too, with renewed valve stem seals. The ones suited to this engine are here:

BMW M20B25 exhaust valves →

13 other products in the same category

Viewed products

Loading...