- On order
Reinforced valve spring kit PSA EW10J4
Valve spring set of 16 reinforced springs for the PSA 2.0 16V EW10J4 engine of 136 hp.
- Brands: CATCAMS
- Engines: EW10J4 (16V)
- Springs: single
- Contents: springs and upper retainers
The EW10J4 engine of Peugeot and Citroën
The EW10J4 is the 136 hp 2.0 litre sixteen-valve four-cylinder of the PSA group, fitted to the Peugeot 206 S16, 307, 406 and 407 and to the Citroën Xsara VTS and C4. As each cylinder has four valves, the full set holds 16 springs.
Original spring seats and collets are left untouched: only the springs and their upper retainers change.
CATCAMS reinforced valve spring set
After every opening, the valve spring pushes the valve back onto its seat and keeps it pressed against the cam. As revs climb, valve, retainer and collets add up to a mass the original spring holds poorly: the valve lifts off, bounces and may end up against the piston.
This CATCAMS kit gathers 16 PAC-E99862 springs and 16 upper retainers 99410/S, giving 265 N at the seat at 35.5 mm and 785 N at 12.5 mm of lift. Original spring seats and collets stay fitted.
Valve spring kit technical specification
| Part number | Brand | Springs | Outer / inner Ø | Seat pressure | Open pressure | Rate | Max lift | Kit contents |
|---|---|---|---|---|---|---|---|---|
| PAC-E99862*16+99410/S*16 | CATCAMS | Single | Outer 25.4 mm | 265 N at 35.5 mm | 785 N at 12.5 mm | 16 springs, 16 upper retainers |
Valve spring kit fitting details
| Part | PSA original | Reinforced spring kit |
|---|---|---|
| Spring | Kit specific: PAC-E99862 (CATCAMS) | |
| Retainer | Kit specific: 99410/S (CATCAMS) | |
| Spring seat | Original kept | |
| Collets | Original kept |
Contents: 16 single springs PAC-E99862 and 16 upper retainers 99410/S. The factory parts, spring seats and collets, stay on the cylinder head.
This height is the distance measured between spring seat and upper retainer with the valve shut; a load only makes sense at the height that goes with it. If the valve seats are recut, the parts move apart and the load drops by as many newtons as the spring rate per millimetre gained. Then measure all 16 valves and compare each with the table.
| CATCAMS | |
|---|---|
| Installed height | 35.5 mm |
| Seat pressure at this height | 265 N |
Technical guide
Our brands
| Belgian company CATCAMS (Cat Cams N.V.) designs race camshafts delivered to customers around the world. Its CNC grinder machines even inclined lobes, and its springs are developed with these shafts, already entered in the BTCC and in the Le Mans 24 Hours. |
How to choose
The higher the load, the better the valve stays glued to its cam as revs rise: that is why a more aggressive camshaft, a higher rev ceiling or forced induction becomes possible without valve float. At 12.5 mm of lift, CATCAMS quotes 785 N for this kit. As maximum lift is not given, ask CATCAMS to validate the lift of the camshaft you have in mind before ordering.
| Criterion | Key point |
|---|---|
| Choosing the pressure | This kit exists with one load only, 265 N at the seat at 35.5 mm. To know whether it suits you, examine your camshaft profile, the rev range you are targeting and any turbo; do not request more than necessary, since excess load tires cams and valvetrain for no benefit. CATCAMS lists no figure for the original springs, hence no percentage gain is claimed. Too much load also adds friction. |
| Single or double spring | This is a single-spring set, PAC-E99862, with the upper retainer 99410/S; no double spring is planned. One spring covers each valve, with no inner spring to manage, and the upper retainers arrive with the kit. |
When reinforced springs become necessary
- Camshaft lifting or opening longer than standard
- Rev ceiling raised by engine changes
- Turbo or supercharger added
- Head rebuilt for circuit, drift or rally
- Tired springs or valve float near the red zone
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Citroën C4 2.0 16V | EW10J4 | 136 hp | 2004-2007 |
| Citroën Xsara VTS | EW10J4 | 136 hp | 2000-2005 |
| Peugeot 206 S16 | EW10J4 | 136 hp | 1999-2007 |
| Peugeot 307 2.0 16V | EW10J4 | 136 hp | 2000-2005 |
| Peugeot 406 2.0 16V | EW10J4 | 136 hp | 1999-2004 |
| Peugeot 407 2.0 16V | EW10J4 | 136 hp | 2004-2005 |
Related products
On the bench, the head is the moment to renew inlet and exhaust valves and guides too, for firmer springs and new sealing across the valvetrain:
| Inlet valves PSA EW10J4 EW10J4S → |
| Exhaust valves PSA EW10J4 → |
-
Brand
-
ReferencePAC-E99862*16+99410/S*16