Skip to content
  • On order
Reinforced inlet valves SUZUKI Swift 1.3 GTi G13B Reinforced inlet valves SUZUKI Swift 1.3 GTi G13B

Reinforced inlet valves SUZUKI Swift 1.3 GTi G13B

€180.71 (tax incl.)
€225.89 (tax incl.) -20%

Set of 8 reinforced inlet valves for SUZUKI Swift 1.3 GTi G13B.

  • Brand: FERREA
  • Engine: G13B 1.3 16V
  • Dimensions: 29.5 mm head, 5.47 mm stem, 105.35 mm length
  • Material: EV8 stainless steel
F6767*8
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

SUZUKI engines covered

The G13B is a 1.3-litre Suzuki four-cylinder with 16 valves and twin overhead camshafts. With 101 hp, it powers the first two generations of the Swift 1.3 GTi and the Swift Cabriolet 1.3 i, between 1985 and 2001.

The cylinder head takes 8 inlet valves, two per cylinder. Higher revs, sharper cams or harder springs expose them to more heat and to more violent landings on the seat.

FERREA reinforced inlet valves

On the G13B, eager at high revs, each inlet valve lifts to admit the fresh charge, drops hard onto the seat and then slides continuously in the guide, between 400 and 550 °C. In this range, ordinary chrome-silicon steel falls from 500 MPa at 500 °C to 250 MPa at 600 °C, a 50 % loss of strength.

FERREA machines its 6000 series from EV8 stainless steel, which keeps 650 MPa at 500 °C and then 550 MPa at 600 °C: 30 % and 120 % better than chrome-silicon under the same conditions.

The F6767 has a 29.5 mm head, 0.5 mm wider than the original size: the area offered to the air grows and cylinder filling improves, as long as all 8 inlet seats get matching machine work.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F6767*8 FERREA +0.5 mm 29.5 mm 5.47 mm 105.35 mm EV8 stainless steel

F6767*8: set of 8 valves at +0.5 mm, 29.5 mm head, 5.47 mm stem, 105.35 mm length.

Fitting details

PartSUZUKI originalReinforced
Collets
Valve stem seals
Valve guide

On reassembly, check that each collet sits correctly in the groove of the FERREA valves and replace any tired parts.

With a 29.5 mm head, the 8 inlet seats are recut to this diameter before final lapping.

Technical guide

The brand offered

SUPERTECH Based in Florida since 1978, FERREA Racing Components designs racing valves, each made from a forged blank and then finished by CNC machining. Its 6000 series, in EV8 stainless steel, is aimed at heavily tuned road heads as well as engines entered in competition.

How to choose

Size means the gap in millimetres between this head and the factory one. The G13B gets a single set, made from EV8 stainless, 0.5 mm oversize:

CriterionOption offered
Size +0.5 mm, 29.5 mm
Seats machined to 29.5 mm, handy when they have already been reground.
Material EV8 stainless steel
Better armed against heat than the chrome-silicon of standard valves.

When reinforced valves become necessary

  • Higher-lift cams paired with firmer springs
  • Rev limit pushed back
  • Supercharger or turbo grafted onto the G13B
  • Head prepared for circuit, hillclimb or rally events
  • Worn Suzuki valves or seats already reground

Compatible vehicles

ModelEngine codePowerYears
Swift I 1.3 GTi / GXi G13B 101 hp 1985-1989
Swift II 1.3 GTi G13B 101 hp 1989-2001
Swift Convertible 1.3 i G13B 101 hp 1992-1996
Important: one set of 8 equips a complete engine. The G13A, the 8-valve G13BA, the G13BB and the M13A of the Swift III are not covered.

Don't forget the exhaust valves

While the G13B head is open, also replace the 8 exhaust valves with their reinforced version, designed for these same Swift GTi and offered here:

Exhaust valves SUZUKI Swift GTi G13B →

7 other products in the same category

Viewed products

Loading...