- On order
Reinforced valve spring set PSA XU10J4RS
Set of 16 reinforced valve springs for the PSA 2.0 16V XU10J4RS four-cylinder.
- Brands: CATCAMS
- Engines: XU10J4RS (2.0 16V)
- Springs: double
- Contents: springs and upper retainers
The 2.0 16V XU10J4RS of Citroën and Peugeot cars
The XU10J4RS is the 2.0-litre, sixteen-valve four-cylinder that PSA fitted to the Citroën ZX 16V and Xsara VTS and to the Peugeot 306 S16. With four valves per cylinder, it counts 16 springs.
The set replaces the 16 springs and their upper retainers; the original spring seats and collets stay in place.
Reinforced valve spring set from CATCAMS
Once the cam has passed, it is the spring that returns the valve onto its seat, keeping it touching the cam. With every extra rev, the moving mass weighs more: with too little load the valve loses contact, bounces and risks striking the piston.
The CATCAMS set gathers 16 double PAC-D92009 springs and 16 upper retainers 99317/S: 333 N seat pressure at 34.0 mm and 1010 N at 14.0 mm of lift, with the factory spring seats and collets left in place.
Valve spring kit technical specification
| Part number | Brand | Springs | Outer / inner Ø | Seat pressure | Open pressure | Rate | Max lift | Kit contents |
|---|---|---|---|---|---|---|---|---|
| PAC-D92009*16+99317/S*16 | CATCAMS | Double | Outer 28.6 / 21.3 mm | 333 N at 34.0 mm | 1010 N at 14.0 mm | 16 springs, 16 upper retainers |
Valve spring kit fitting details
| Part | PSA original | Reinforced spring kit |
|---|---|---|
| Spring | Kit specific: PAC-D92009 (CATCAMS) | |
| Retainer | Kit specific: 99317/S (CATCAMS) | |
| Spring seat | Original kept | |
| Collets | Original kept |
The set is made up of 16 double PAC-D92009 springs and 16 upper retainers 99317/S. The original spring seats and collets are kept.
By installed height we mean the distance separating spring seat from upper retainer while the valve is shut; every load figure applies only to the height shown with it. Should the seats be machined, the gap widens and each millimetre gained lowers the load by the stiffness of the spring, in newtons. Measure the 16 valves again once machining is finished.
| CATCAMS | |
|---|---|
| Installed height | 34.0 mm |
| Seat pressure at this height | 333 N |
Technical guide
Our brands
| Belgian firm CATCAMS (Cat Cams N.V.) specialises in competition camshafts, exported worldwide; its computer-controlled machine can even produce inclined lobes. The brand develops its springs with its camshafts, which took part in the BTCC and the 24 Hours of Le Mans. |
How to choose
Stiffer springs keep the valve riding on the cam as engine speed climbs: they let you fit a hotter camshaft, raise the rev ceiling or go turbocharged with no valve float. At 14.0 mm of lift, CATCAMS quotes 1010 N for this set. As the maximum lift is not stated, whichever camshaft you pick must have its lift checked with CATCAMS before purchase.
| Criterion | Key point |
|---|---|
| Choosing the pressure | A single load is offered here: 333 N at the seat at 34.0 mm. Before deciding, weigh the camshaft's lift, the engine speed you want and any boost; surplus load just wears cams and valvetrain. The original springs' pressure is not published by CATCAMS, so no gain in percent is claimed. The 1010 N figure at 14.0 mm of lift is a handy yardstick against another spring. |
| Single or double spring | Every valve gets a pair of nested springs here: the PAC-D92009 merges outer spring PAC-E92009 with inner spring PAC-I92009, and the upper retainer 99317/S completes the assembly. Both springs act together. The set holds 16 double springs, one per valve. |
When reinforced springs become necessary
- Camshaft with a bigger lift
- Higher rev ceiling after tuning
- Turbocharger or supercharger fitted to the engine
- Head rebuilt for circuit, drift or rally use
- Worn springs, or valve float showing up near the rev limit
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Citroën Xsara VTS | XU10J4RS | 1998-2005 | |
| Citroën ZX 16V | XU10J4RS | 1996-1997 | |
| Peugeot 306 S16 | XU10J4RS | 1996-2001 |
Related products
While the cylinder head is off, consider the inlet valves, the exhaust valves and their guides as well: firmer springs then show their full worth.
| Inlet valves PSA XU10J4RS → |
| Exhaust valves PSA XU10J4RS → |
-
Brand
-
ReferencePAC-D92009*16+99317/S*16