Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
Categories
Manufacturers
Categories
Known as the "IRESA silencer", here you will find the RC RACING and66-73 stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
kit 4 injectors 525cc Fuel Injector Clinic for SUZUKI Swift 1.3 GTI G13A 101cv 03/1989-05/2001
WALBRO 400 L/H High Flow Fuel Pump for PORSCHE 911 (996) 3.6 Turbo 42 & 4WD 00-2005Replaces the original pump. Original fuel pump part number: 99662010200
MALPASSI Adjustable Fuel Pressure Regulator for BMW 3 Series M3 Evolution I/II/III E30 87-94For fuel-injected engines only. This pressure regulator is adjustable, allowing you to increase your engine's performance. It installs in place of the original part.Image for illustrative purposes only
MALPASSI Adjustable Fuel Pressure Regulator for AUDI A3 1.8T 20v 2000For fuel-injected engines only. This pressure regulator is adjustable, allowing you to increase your engine's performance. It installs in place of the original part.Image for illustrative purposes only
RC RACING Group N silencer manufactured from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, manifold flange modification, vehicle/competition specifics, etc.).Not road legal.
VIBRA-TECHNICS reinforced engine mount and transmission mount for2.0 16V F4R 874 engine:RENAULT Megane 3 RS 2009 - 2015
VIBRA-TECHNICS reinforced transmission support for OPEL Corsa D OPC 1.6 16V Turbo 2006-2014 - Sold individually
VIBRA-TECHNICS reinforced engine mount and transmission mount for VW Golf 6:VW Golf 6 2008 - 2017
COOL IT Thermo-Shield 51mm x 15M Heat WrapIdeal for protecting your hoses and electrical wires in applications where it is difficult to disconnect them. This wrap protects your parts from over 90% of radiant heat up to 1093A deg C.Caution: Do not use directly on the heat source.Generic Photo
COOL IT 60.96 x 101.6cm Mylar Heat Shield for Muffler/Catalytic Converter (400A deg C)Ideal for protecting your running gear from exhaust heat. This woven silica heat shield with a Mylar finish can withstand continuous direct temperatures of 400A deg C and radiant heat up to 1093A deg C.Sold with mounting hardware.Generic Photo
High-quality Connecting rods forged BMW / TOYOTA 3.0 24V B58B30 (Connecting rods forged BMW TOYOTA 3.0 24V B58B30) for reliable fitment and performance.
Forged Crankshaft Stroke 89mm ZRP for CITROEN PEUGEOT TU5J4 TU5JP4 1.6 16V
High-performance ZRP forged connecting rod in 4340 steel with ARP L19 bolts (260,000 psi). Designed for VAG 1.8T 20V and 2.0L TFSI EA113 engines in Drift, Rally, Circuit and Drag Racing builds. Center-to-center 144mm, piston pin A?20mm. Sold individually.
MISHIMOTO universal aluminum water radiator 686 x 483 x 76mm with inlet (38mm) and outlet (45mm) on the same side
MISHIMOTO X-Line aluminum water radiator for BMW M3 (E36) 3.0 24V S50B30 286hp 08/1994-09/1995
RC RACING manufactured in 304L stainless steel, with wide welds and tight tolerances, allowing for easy installation in place of the original part.
RC RACING stainless steel manifold made from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED FOR...
COOL IT clip-on thermal insulation for 4 or 6 cylinder manifoldsReduces heat transfer. Can be installed directly on the vehicle without removing the manifold.Generic photo
High-quality Reinforced cylinder head studs ARP FORD Focus 2 RS 2.5 20V 305hp (Reinforced cylinder head studs ARP FORD Focus RS) for reliable fitment and performance.
ARP Reinforced 12-Screw kit for Self-Locking Bolts, Part Number 204-3003 Installation Instructions
RC RACING stainless steel pipe silencer made from 304L stainless steel, with with welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED FOR ROAD...
CATCAMS reinforced double valve spring, part number PAC-D19864
Powerflex Black Series 2-Built Bushing kit for Front Rear Control Arm for Audi S3 (8L), 1.8T 20V Quattro Engine from November 1998 to June 2003 The "Black Series" range from industry leader Powerflex is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. This kit corresponds...
POWERFLEX BLACK SERIES Front Suspension Bushing kit (45mm) for AUDI S3 (8L), 1.8T 20V AWD engine from November 1998 to June 2003 The "Black Series" range from the market leader POWERFLEX is designed for racing, track, and rally applications with a 95 Shore A hardness, offering increased rigidity and a long service life. Attention: Please check the outside...
POWERFLEX PERFORMANCE Front Suspension Control Arm Bushing kit (45mm) for AUDI S3 (8L), 1.8T 20V AWD engine from November 1998 to June 2003 The "Performance" range from the market leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a certain level of comfort and designed for a long service life. Attention: Please...
135A REDOX silicone elbow, 30mm inner diameter, 100x100mm length
REDOX silicone hose, 115mm inner diameter, 1 meter length
RC RACING Africa pipe/decatalytic converter made of 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.
1/8" NPT Water Temperature Probe/Sensor with Solder Insert and DTM Type Connector (Waterproof)
90A deg male-male elbow adapter 1/8" NPT - DASH 4 (JIC 7/16")
ACL Race Series 5M2905H Trimetal Crankshaft Bearing Set
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B4390H
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B1185H
GOODRIDGE braided brake hose kit for FORD Fiesta VI ST180
GOODRIDGE braided brake hose kit for CITROEN DS3 RACING (Brembo calipers)
GOODRIDGE braided brake hose kit for MERCEDES A45 / CLA 45 AMG from 2013 onwards
RC RACING stainless steel primary intermediate pipe without flame arrester for RENAULT SUPER 5 1.4 8V GT TURBO from 1985 to 1993
MISHIMOTO 68A deg C Water Thermostat for NISSAN 350Z 2003-2006Information:Opens at 68A deg C vs. original 76.5A deg CFits in place of the original compatible with engines:VQ35ofVQ35HRVQ40ofVK45of
EBC Brake A Yellow/Yellowstuff rear brake pads (set) for PEUGEOT 309 GTI
Known as the "IRESA silencer", here you will find the RC RACING and381 stainless steel exhaust silencer, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
SAFFA Reinforced Clutch Mechanism for PEUGEOT 405 Mi16, 2.0 16V engine from 1992 to 1995For 215mm diameter discPull-type clutchThe reinforced mechanisms have the same dimensions and tolerances as the standard series, but with increased pressure plate and damping tabs Reinforced. Photo not contractual
Reinforced SAFFA clutch mechanism for PEUGEOT 106 reinforced cushioning.Non-contractual photo
SAFFA 3-pad sintered metal reinforced clutch disc for SUZUKI Jimny, 1.3 16V engineTechnical Information:Diameter: 190mmNumber of splines: 20 Disc compatible with original mechanism but note your original mechanism will wear out faster than a reinforced mechanism.
AEM Ethanol Percentage and Temperature Sensor with 3/8" Barbed Connection
VOLKSWAGEN SAFFA 1974-1984 performance part from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: ALFA ROMEO 145/146 1 7 disc m such frit rigid 4 pads 16V Boxer NSB CONCEPT Fast shipping.
SAFFA Reinforced Clutch Disc, reference EMB-2588Technical Information:- Diameter: 180mm- Disc: Rigid- Pads: 3 sintered metal pads- Hub: 21X18XEV- Splines: 18
MEGAFLEX REDOX silicone hose, 30mm inner diameter, length of your choice
90A silicone elbow, REDOX, 152mm inner diameter, 150x150mm length
51mm - double humps silicone 4 plis. NSB CONCEPT. Fast shipping!
POWERFLEX PERFORMANCE Rear Control Arm 2-Pack Hard Bushing kit for BMW E36The "Performance" range from industry leader POWERFLEX is designed for road/sport use, offering improved rigidity while maintaining a degree of comfort and built for a long service life. This kit corresponds to Part 8 (see below):
POWERFLEX PERFORMANCE Hard Bushings for Rear Axle/Differential Mount for BMW E30
Pair of Bilstein B6 rear shock absorbers for RENAULT Clio PHASE II, part number 24-065733SOLD AS A PAIR
Intake + Exhaust Valves Ferrea original side TOYOTA SUPRA 2JZGTE
RC RACING stainless steel decat pipe/catalyst made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED...
RC RACING Group N stainless steel silencer manufactured from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics,...
RC RACING stainless steel decat pipe/catalyst made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED...
