Skip to content
  • On order
Reinforced inlet valves OPEL Z16LER Z18XER A18XER Reinforced inlet valves OPEL Z16LER Z18XER A18XER

Reinforced inlet valves OPEL Z16LER Z18XER A18XER

€252.26 (tax incl.)
€315.32 (tax incl.) -20%

Set of 8 reinforced inlet valves for the OPEL Z16LER, Z18XER and A18XER.

  • Brand: SUPERTECH
  • Engines: Z16LER (1.6 turbo), Z18XER, A18XER (1.8 16V)
  • Dimensions: 31.3 mm head, 4.96 mm stem, 118.38 mm long
  • Material: black nitrided EV8, single groove
GIVN-3320S-8
On order, 15 to 30 days lead time
Pay in installments

OPEL engines covered

The Z16LER, Z18XER and A18XER are Opel 16-valve, twin-cam four-cylinders: the 1.6 litre turbo Z16LER powers the 192 hp Corsa D 1.6 Turbo, while the 1.8 litre Z18XER and A18XER are fitted to the 140 hp Astra H and J, Insignia A, Mokka, Vectra C, Signum and Zafira.

Their cylinder head carries 8 original inlet valves 55557741 (6 41 076), held by collets 90529533. Raised boost on the Z16LER, sharper camshafts or a higher rev limit on the 1.8 expose them to more heat and impact.

SUPERTECH reinforced inlet valves

In Opel's Z16LER, Z18XER and A18XER, the cam pushes the 8 inlet valves down in turn to bring air into the chambers, which the 192 hp Corsa D also feeds through its turbo; each valve then returns sharply to its seat while the stem carries on its travel in the guide. With the engine driven towards its limiter, this motion tops twenty passes a second. Each valve works at 400 to 550 °C, whereas a stock chrome-silicon goes from 500 MPa at 500 °C to 250 MPa at 600 °C: 50 % of its strength gone as soon as heat rises.

The SUPERTECH GIVN-3320S-8 is made from EV8 stainless steel, which keeps 550 MPa at 600 °C, 120 % better than chrome-silicon at that temperature. Black nitriding covers its stem, whose hardened surface copes with rubbing and holds up longer; its head is dished and its stem thinned where it meets the head, lightening the moving parts and freeing airflow towards the cylinder.

It stands out with a single groove in place of the original grooves: paired with the collets designed for it, this groove lets the collets grip the stem firmly and relieves the groove area, making retainer retention more reliable as revs climb.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
GIVN-3320S-8 SUPERTECH Standard 31.3 mm 4.96 mm 118.38 mm 1 EV8, black nitrided, dished head

Fitting details

PartOPEL originalReinforced
Collets 90529533 KPR-5.0-7S-16
Valve stem seals 24405819 VSI-GM50-E-8
Valve guide 24405805 GDE-OP50-8

This single groove valve must be fitted with SUPERTECH KPR-5.0-7S collets, two per valve.

Valve clearance is set with graded tappets: after replacing the valves, check it and select tappets of the right thickness.

Technical guide

The brand offered

SUPERTECH SUPERTECH Performance, a Californian shop devoted to competition valve trains for more than thirty years, produces valves, springs, retainers and guides, and has every series checked by ultrasound, radiography and then laser before sending it to engine builders.

When reinforced valves become necessary

  • Raised boost on the Corsa's Z16LER turbo
  • Pointier cams or springs rated higher
  • Fuel cut-off pushed past the stock limit
  • Engine prepared for track or rally stages
  • Original valves showing wear, or recut seats

Compatible vehicles

ModelEngine codePowerYears
Astra H (A04) 1.8 Z18XER, A18XER 140 hp 2005-2010
Astra H (A04) 1.8 Z18XER, A18XER 140 hp 2006-2010
Astra H (A04) 1.8 Z18XER, A18XER 140 hp 2007-2010
Astra H Classic (A04) 1.8 Z18XER 140 hp 2009-2012
Astra H Classic (A04) 1.8 Z18XER 140 hp 2012-2014
Astra H Classic (A04) 1.8 Z18XER 140 hp 2013-2014
Astra H GTC (A04) 1.8 Z18XER, A18XER 140 hp 2006-2010
Astra H TwinTop (A04) 1.8 Z18XER, A18XER 140 hp 2005-2010
Astra J GTC 1.8 A18XER 140 hp 2011-2013
Corsa D (S07) 1.6 Turbo Z16LER 192 hp 2006-2014
Insignia A (G09) 1.8 A18XER 140 hp 2008-2017
Mokka / Mokka X (J13) 1.8 A18XER 140 hp 2013-2019
Mokka / Mokka X (J13) 1.8 4x4 A18XER 140 hp 2013-2019
Signum (Z03) 1.8 Z18XER 140 hp 2005-2008
Vectra C (Z02) 1.8 Z18XER 140 hp 2005-2008
Vectra C GTS (Z02) 1.8 Z18XER 140 hp 2005-2008
Zafira / Zafira Family B (A05) 1.8 Z18XER, A18XER 140 hp 2005-2015
Zafira Tourer C (P12) 1.8 A18XER 140 hp 2011-2018

OEM part number (inlet valve): 55557741 (6 41 076)

Important: one set of 8 covers a complete engine. The LPG bi-fuel versions, fitted with a different original valve (55572520), are not covered.

Related products

While the head of these Opel engines is off, also replace its 8 exhaust valves, likewise available reinforced through the button below:

OPEL Z16LER Z18XER A18XER exhaust valves →
SUPERTECH bronze valve guides Opel Z16LER A18XER →

16 other products in the same category

Viewed products

Loading...