I ZRP forged connecting rods for OPEL 1.6T A16LER/S/T Z16LER

kit of 4 ZRP forged I-shaped connecting rods with ARP reinforced connecting rod screws for OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014

The ZRP brand is the subsidiary of DRAKOS ENGEERING renowned for its experience in high-performance mechanical part designs. ZRP specializes exclusively in forged engine parts and has designed for your OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014 forged connecting rods in high-strength 4340 steel in order to accept high boosts on your Z16LER engine and ARP2000 connecting rod screws for large increases in engine speed.

The head of the ZRP forged connecting rods for OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014 is equipped with a ring machined from hot extruded cupro-aluminum alloy patented AMPCO 18 before being ground to ensure that the oil film is maintained with your piston pin.

The design of this ZRP forged I-shaped connecting rod for OOPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014 gives it exceptional resistance to significant increases in power and torque by high boost pressures, as well as to extreme uses as we encounter with our customers whom we equip for their preparation of Drift forged engines and Run Dragster forged engines.

Features: Center distance: 129.75mm

Foot diameter: 46.00mm Foot width: 21.90mm

Piston pin diameter: 19.00mm

Connecting rod screws supplied: ARP2000

Thread of screws provided: 3/8" Weight: 419gr

Maximum admissible power: 800hp Lexicon:

1) Connecting rod 2) Foot diameter

3) Connecting rod body 4) Connecting rod screw

5) Big end 6) Nut

7) Connecting rod cap 8) Head diameter

9) Center distance

When you upgrade your Z16LER engine to a forged engine, it is recommended to fit forged connecting rods with tri-metal connecting rod bearings, in addition to replacing your original pistons with forged pistons.

Find the forged pistons for your OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014 (if your engine has more than 50,000km, it is recommended to take an extra cost and re-bore the cylinders followed by honing the barrels).

Find the connecting rod bearings for your ZRP forged connecting rods for your OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014.

Find this kit with reinforced ARP L19 and ARP 625+ connecting rod screws for your OPEL Corsa D OPC 1.6 Turbo 192CV Z16LER 2006-2014.