Crankshaft thrust washers Nissan VQ35HR, VQ37VHR, VR30DDTT, VR38DETT

The Nissan VQ35HR, VQ37VHR, VR30DDTT and VR38DETT V6 engines

The VQ35HR (3.5 litre) and VQ37VHR (3.7 litre) are naturally aspirated 24-valve Nissan V6 engines. The VR30DDTT (3.0 litre) and VR38DETT (3.8 litre) are 24-valve V6 engines fitted with two turbochargers. They power the Nissan 350Z, 370Z, Skyline and GT-R, as well as the Infiniti G, M, Q50 and Q60. For these engines, the manufacturer lists a single version of thrust washers, uncoated.

Thrust washers

Thrust washers, also called thrust bearings, sit on each side of a crankshaft main bearing. They take the clutch thrust every time the clutch is released and set the crankshaft end play. A single version in standard size: two identical half washers, uncoated.

This part number is common to the four engines. The manufacturer does not publish the washer's own dimensions.

Technical specifications

The brand

ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, supplies uncoated thrust washers for these engines.

Vehicle compatibility

These thrust washers fit the Nissan VQ35HR, VQ37VHR, VR30DDTT and VR38DETT V6 engines (engine codes VQ35HR, VQ37VHR, VR30DDTT, VR38DETT) of the following vehicles: