Skip to content
  • On order
PSA TU 106 XSI 8s Soupapes d'échappement Forgées 106/ saxo 8S PSA TU 106 XSI 8s Soupapes d'échappement Forgées 106/ saxo 8S

SUPERTECH bronze valve guides BMW M5 E34 S38B36 S38B38

€240.81 (tax incl.)
€301.01 (tax incl.) -20%

Kit of 24 valve guides for the BMW M5 E34 S38B36 and S38B38, 7 mm stem.

  • Brand: SUPERTECH
  • Engines: S38B36, S38B38
  • Material: manganese bronze, inlet and exhaust
  • Sizes: standard (OD 12.03 mm) or +0.0013" (OD 12.065 mm)
GDE-BMS14-7-12*2
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

BMW engines concerned

The guides in this kit fit the 24-valve, 7 mm stem cylinder head of the BMW S38 inline six of the E34 M5: the 3.6 litre S38B36 and the 3.8 litre S38B38, in saloon form and, for the 3.8 litre, in Touring form.

Each of the 24 valves slides in a guide pressed into the cylinder head. BMW specifies a bore of 7.0 mm for these guides; on the S38B36, the outside diameter is 12.00 mm, with two repair sizes of 12.20 and 12.40 mm.

SUPERTECH manganese bronze valve guides

Housed in the cylinder head, the guide lines the valve up with its seat, drains part of the stem heat into the head and holds the stem seal. As wear sets in, the valve wobbles, closes less well and lets oil slip into the chamber: blue smoke, a dropping oil level and falling compression.

Precision machined by SUPERTECH, these guides are made of manganese bronze, a copper alloy which, according to the brand, dissipates heat much better than original sintered guides. They are most often fitted with reinforced valves; the kit supplies the 24 guides of one cylinder head, a single part number covering inlet as well as exhaust.

Valve guide technical specifications

Part numberBrandMaterialSizeStem Ø
OEM 7.0 mm
Outside Ø
OEM S38B36 12.00 mm, repair 12.20 / 12.40 mm
Length
GDE-BMS14-7-12*2 SUPERTECH Manganese bronze Standard 7.0 mm 12.03 mm 45 mm
GDE-BMS14-7-OS1-12*2 SUPERTECH Manganese bronze +0.0013" 7.0 mm 12.065 mm 45 mm

Valve guide installation

ComponentOriginalReinforced
Valve guide Inside Ø 7.0 mm Replaced by the kit
Inlet stem seal 7 mm stem VS-VW7I-12
Exhaust stem seal 7 mm stem VS-VW7E-12
Valves 7 mm stem Inlet / Exhaust

Technical guide

Reinforced valves with a 7 mm stem available for these engines:

BMW M5 E34 S38 inlet valves →
BMW M5 E34 S38 exhaust valves →

Our brand

SUPERTECH Based in Silicon Valley, SUPERTECH has been making valves, springs and titanium retainers for racing for more than thirty years. Each series goes through finite element analysis, then ultrasonic, X-ray and laser checks; new products are validated with engine builders.

Standard or oversize?

SUPERTECH offers this guide in standard size (12.03 mm outside diameter) and in a 0.0013" oversize (12.065 mm outside diameter).

Manganese bronze

Manganese bronze combines copper and zinc with added iron, aluminium and manganese; it pairs high mechanical strength with good endurance against wear and corrosion, which is why it is used for heavily loaded bushes and guiding parts.

When valve guides must be replaced

  • Blue smoke and oil lost past the stems
  • Reinforced valves on a well-used cylinder head
  • Cylinder head preparation for racing, drift or rally
  • Complete valvetrain rebuild

Vehicle compatibility

ModelEngine codePowerYears
M5 3.6 (E34) S38B36 315 hp 1988-1992
M5 3.8 (E34) S38B38 340 hp 1992-1995
M5 3.8 Touring (E34) S38B38 340 hp 1992-1995

Remember the valve stem seals

Any removal of the guides calls for new valve stem seals. For these engines we offer the following SUPERTECH seals, to be fitted with the kit:

BMW M5 E34 S38 inlet stem seals →
BMW M5 E34 S38 exhaust stem seals →

10 other products in the same category

Viewed products

Loading...