Sort and filter
- Piston Pins, Circlips and Piston Rings
- KS Kolbenschmidt bearings
- Valve collets
- Graduated disc for camshaft timing
- Grease/Gasket for Reinforced Cylinder Head Bolts and Studs
- Shims for mechanical cam followers
- ARP Reinforced Crankshaft Bearing Bolts/Studs
- ARP reinforced connecting rod bolts
- ACL ref
- BY REFERENCE ARP - Reinforced cylinder head bolts/studs
- BY REFERENCE ATHENA - Reinforced cylinder head gaskets
- BY REFERENCE CATCAMS - Camshafts
- BY REFERENCE CATCAMS - Reinforced valve spring retainers
- BY REFERENCE CATCAMS - Mechanical Cam Followers
- BY REFERENCE CATCAMS - Reinforced Valve Springs
- BY REFERENCE COMETIC - Reinforced cylinder head gaskets
- BY REFERENCE FERREA - Reinforced valve spring retainers
- BY REFERENCE FERREA - Reinforced valve springs
- BY REFERENCE FERREA - Reinforced Valves
- BY REFERENCE NGK - Spark Plugs
- BY REFERENCE KENT CAMS - Reinforced Timing Belt
- BY REFERENCE SUPERTECH - Mechanical Cam Followers
- BY REFERENCE VIBRA-TECHNICS - Engine Mounts
- BY REFERENCE VIBRA-TECHNICS - Gearbox/transmission mount
Sort by:
Filter By
BY REFERENCE FERREA - Reinforced valve spring retainers
Titanium halves retainer mass at equal stiffness, which takes weight straight off the fastest moving part of the spring stack. Two Ferrea part numbers are active here, both listed for the 2.8 litre…Titanium halves retainer mass at equal stiffness, which takes weight straight off the fastest moving part of the spring stack. Two Ferrea part numbers are active here, both listed for the 2.8 litre 24-valve VR6 fitted by Volkswagen and Seat, engines AQP, AUE, BDE, BDF, AYL and AXK in the Golf IV, Bora, Jetta IV, Sharan, Leon Cupra and Alhambra. The first, E11063, is the titanium retainer on its own, for replacing one piece or completing a set. The second pairs that same retainer with the Ferrea S10087 spring as a matched assembly: the sensible choice when the head is off and springs and retainers are being renewed together.
- On order