Sort and filter
- Piston Pins, Circlips and Piston Rings
- KS Kolbenschmidt bearings
- Valve collets
- Graduated disc for camshaft timing
- Grease/Gasket for Reinforced Cylinder Head Bolts and Studs
- Shims for mechanical cam followers
- ARP Reinforced Crankshaft Bearing Bolts/Studs
- ARP reinforced connecting rod bolts
- ACL ref
- BY REFERENCE ARP - Reinforced Cylinder Head Screws/Studs
- BY REFERENCE ATHENA - Reinforced cylinder head gaskets
- BY REFERENCE CATCAMS - Camshafts
- BY REFERENCE CATCAMS - Reinforced spring cups
- BY REFERENCE CATCAMS - Mechanical Cam Followers
- BY REFERENCE CATCAMS - Reinforced Valve Springs
- BY REFERENCE COMETIC - Reinforced cylinder head gaskets
- BY REFERENCE FERREA - Reinforced spring cups
- BY REFERENCE FERREA - Reinforced valve springs
- FERREA REFERENCE - Reinforced Valves
- NGK REFERENCE - Spark Plugs
- BY REFERENCE KENT CAMS - Reinforced Timing Belt
- BY REFERENCE SUPERTECH - Mechanical Cam Followers
- BY REFERENCE VIBRA-TECHNICS - Engine Mounts
- BY REFERENCE VIBRA-TECHNICS - Gearbox/Transmission Support
Sort by:
Filter By
KS Kolbenschmidt bearings
The densest of our part number pages: 3,003 active KS Kolbenschmidt bearings out of 3,008 listings. Two coding systems sit side by side. The first is an eight-digit number taken from the…The densest of our part number pages: 3,003 active KS Kolbenschmidt bearings out of 3,008 listings. Two coding systems sit side by side. The first is an eight-digit number taken from the Kolbenschmidt-Rheinmetall catalogue, whose leading pair places the range. The second pairs a type prefix with a size: CB for a big end bearing, MS for a main bearing, TW for a thrust washer, followed by STD, 0.25 or 0.75 depending on how far the crankshaft has been reground. Listings carry neither vehicle nor engine code: this page is browsed with the number in hand, read off the removed bearing or taken from the maker's catalogue. It is the quickest route once the undersize is known.