Skip to content
  • On order
Forged connecting rods BMW - 2.0L 16V Turbo - N20B20 N26B20 for forged pistons Forged connecting rods BMW - 2.0L 16V Turbo - N20B20 N26B20 for forged pistons

Forged connecting rods BMW - 2.0L 16V Turbo - N20B20 N26B20 for forged pistons

€640.32 (tax incl.)
€800.40 (tax incl.) -20%

Set of 4 forged 4340 steel rods for BMW 2.0L Turbo N20B20 N26B20.

  • Brands: ZRP
  • Compatibility: 1 Series (F20), 3 (F30), 5 (F10), X1 (E84), Z4 (E89)
  • Engine codes: N20B20, N26B20
  • Bolts included: ARP 2000
R-BMW-022-I
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

The BMW N20B20 N26B20 engine

The N20 is BMW's 2.0-litre turbocharged four-cylinder petrol engine, built from 2011 to 2017. Aluminium block, double overhead camshafts, 16 valves, direct injection, Valvetronic variable valve lift and a twin-scroll turbo: it replaced the naturally aspirated sixes across much of the range. With an 84 mm bore and a 90.1 mm stroke, it produces from 156 to 245 hp depending on version. The N26 is its SULEV emissions variant for the North-American market.

Very widely used (1 to 5 Series, X1, X3, X4, X5, X6, Z4), the N20 is a popular tuning base: its displacement and turbo offer strong potential. But as soon as boost pressure and power rise, the standard rods become the weak link. Switching to forged 4340 connecting rods secures the bottom end and allows significant, reliable power gains.

Forged connecting rods

Everything starts with the steel: a high-strength 4340, forged and heat treated, whose yield strength and fatigue endurance are on a different scale from those of a mass-production rod. That is what makes the N20 / N26 bottom end reliable as soon as power climbs, and it is essential when moving to forged pistons, raising the rev limit, increasing boost pressure or gaining displacement. The ZRP I profile, 487 g for a 144 mm centre-to-centre, a 22 mm pin and a 53.6 mm big end, stays light while taking far more load.

They are sized for modified engines, turbocharged or supercharged, and cover every discipline: rally, drift, drag, circuit and trackdays, hillclimb, time attack. They support Stage 2, Stage 3 and Stage 4+ builds, right up to the competition block. On a modern turbo four-cylinder such as the N20 they follow the rise in boost pressure without becoming the weak point.

Technical specifications of the BMW N20B20 N26B20 forged connecting rods

ReferenceBrandProfileBoltsPin diameterSmall-end widthBig-end diameterBig-end widthCenter-to-centerWeight
per rod
R-BMW-022-I ZRP I ARP 2000-3/8"-38mm 22 mm 53.6 mm 20.9 mm 144 mm 487 g

ZRP: Straight, non-tapered pin end.

Couple de serrage et allongement

RodBoltsTightening torqueRecommended stretch
ZRP (R-BMW-022-I) ARP 2000 61 N·m 0.140 – 0.152 mm

Contrary to a widespread belief, it is not combustion pressure that threatens rod fasteners: combustion pushes the piston down and compresses the joint between rod and cap. The danger comes from the phase where the piston is decelerated at the top of its stroke, when inertia pulls the cap outwards. If tightening has stayed below the range, preload no longer covers that pull: the cap lifts, the shell is hammered, the parting face degrades and running clearance drifts until the oil film is lost. If tightening has exceeded the range, the bolt has been stretched beyond its elastic limit: its preload collapses anyway, and the overload has distorted the bearing bore and made the big end oval. For the ZRP rods of this N20 or N26 only one combination exists, with 3/8" ARP 2000 fasteners: the torque and stretch figures in the table below, as specified by the fastener manufacturer, apply without discussion. The stretch gauge remains the reliable method, with ARP assembly lubricant and the kit instructions as references.

Technical guide

4340 forged steel: what is it?

4340 is a low-alloy nickel-chromium-molybdenum steel used in aerospace and motorsport. Forged then heat-treated by quenching and tempering, it combines high tensile strength, excellent fatigue life and good ductility. Compared with an original sintered-steel rod, it gains around 19% in yield strength, 8% in tensile strength and 19 to 37% in fatigue life: real margin where sintered steel breaks under heavy load. It is the reference material for any high-performance connecting rod.

Connecting rod profiles

Bielle forgée profil en I I-Beam profile. Slimmed at its centre and bordered by two flanges that form the letter “I”, the section gives the rod high stiffness for a controlled mass. On modern turbo engines such as the N20 / N26, it is the reference profile, as relevant for making the bottom end reliable as for following an increase in boost pressure.

How to choose your rod bolts? ARP

The rod bolt is the part whose metallurgy translates most directly into engine reliability. Alloy grade, cleanliness of the steel, quench and temper carried through the whole section, threads rolled after that treatment to work-harden the thread root: every step adds cyclic fatigue margin. Dimensional consistency then decides how equal the preloads are from one bolt to the next. This N20 / N26 is supplied with ARP 2000 hardware in 3/8"-38 mm; refer to the table for torque and stretch, and always drive the tightening by measured stretch.

Visserie ARP 2000 ARP 2000 (tensile strength around 220,000 psi, ~1,517 MPa) stands as the high-performance standard. Its thresholds are reasoned per cylinder and per bolt diameter: on the order of 200 hp per cylinder in 3/8", for engine speeds allowed up to 8,500 rpm. Versatile, it suits circuit, trackday, drift, rally, drag and hillclimb, with a recognised balance of strength and reliability and no storage constraints.

Measuring bolt stretch

Mesure de l'allongement d'une vis de bielle forgée à la jauge ARP

In addition to torque tightening, measuring rod-bolt stretch is the most reliable check for optimal preload. The check is done with the bolt fitted: place the gauge (dial indicator) on the two ends of the bolt and read its actual stretch, which must match the recommended value (see the torque & stretch table above). This method removes the friction variations inherent in torque tightening and secures the assembly on heavily stressed engines.

Buy the ARP stretch gauge →

The brands we offer

ZRP ZRP : a Greek brand of high-performance forged connecting rods, made by Drakos Engineering in Athens. Each rod is forged from 4340 steel, precision-machined and balanced to stay reliable at high rpm. Available here in I-Beam profile and supplied with ARP 2000 bolts, they are designed and inspected in Greece and used in rally, on track and in drift.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the BMW N20B20 N26B20 engine

Below are the vehicles fitted with the BMW 2.0L 16V Turbo N20B20 N26B20 engine. Measuring the piston pin diameter and the rod length remains essential before any order.

BrandModel (chassis)Engine codePowerYears
BMW 1 Series (F20, F21) 120i / 125i N20B20 184–238 hp 2011–2019
BMW 2 Series Coupé / Convertible (F22, F23) 220i / 228i N20B20 184–245 hp 2013–2021
BMW 3 Series (F30, F31, F34) 320i / 328i N20B20 184–245 hp 2012–2016
BMW 4 Series (F32, F33, F36) 428i N20B20 245 hp 2013–2017
BMW 5 Series (F10, F11) 520i / 528i N20B20 184–245 hp 2011–2017
BMW X1 (E84) sDrive / xDrive 18i / 20i / 28i N20B20 156–245 hp 2011–2016
BMW X3 (F25) sDrive / xDrive 20i / 28i N20B20 184–245 hp 2011–2017
BMW X4 (F26) xDrive 20i / 28i N20B20 184–245 hp 2014–2018
BMW X5 (F15) xDrive 28i N20B20 245 hp 2013–2018
BMW X6 (F16) xDrive 28i N20B20 245 hp 2015–2019
BMW Z4 Roadster (E89) sDrive 18i / 20i / 28i N20B20 156–245 hp 2011–2016

OEM reference: 11 24 7 624 616.

Why it is the most cost-effective solution

A broken standard rod on this engine is not solved with one part: the rods AND the pistons, almost always damaged at the same time, have to be replaced, and the crankshaft, bearings and liners have to be checked. The bill for a simple return to the factory configuration is high, and the engine has gained no capability at all.

For an equivalent or even lower budget, a set of 4340 forged rods combined with forged pistons changes the level of reliability and installs a real safety margin, with the option of raising power afterwards. This has been the choice of European engine builders for more than fifteen years on turbo four-cylinders of this type.

For the same budget: more reliability, more potential and more longevity for the N20 bottom end.

4 other products in the same category

Viewed products

Loading...