Skip to content
  • On order
Reinforced exhaust valves Subaru EJ20 EJ205 EJ207 EJ255 EJ257 Reinforced exhaust valves Subaru EJ20 EJ205 EJ207 EJ255 EJ257

Reinforced exhaust valves Subaru EJ20 EJ205 EJ207 EJ255 EJ257

€187.78 (tax incl.)
€234.72 (tax incl.) -20%

Set of 8 reinforced exhaust valves for Subaru with EJ20 turbo, EJ255 and EJ257 boxer engines.

  • Brands: FERREA, SUPERTECH
  • Engines: EJ20-GN, EJ20G, EJ20U, EJ205, EJ207, EJ20X, EJ20Y, EJ255, EJ257, EJ25DET
  • Dimensions: 32 mm, 32.5 mm or 33 mm head, 5.96 mm stem, 104.2 mm to 104.8 mm length
  • Material: special alloy, black nitrided stainless steel, Super Alloy, Inconel or sodium filled Nimonic
F6075*8
0 in stock in France
ORDER TODAY, WE SHIP IN 20 DAYS
Pay in installments

Subaru engines covered

16-valve flat-four engines, most of them turbocharged, the EJ units on this page come as 2 litre (EJ20-GN, EJ20G, EJ20U, EJ205, EJ207, EJ20X, EJ20Y) and 2.5 litre (EJ255, EJ257, EJ25DET). From 1992 to 2022 they power the Impreza GT, WRX and STi, the turbocharged Forester, the Legacy and Outback, then the WRX and WRX STi.

Each has 8 exhaust valves: 13202AA400 and 13202AA401 on the EJ205, 104.7 mm long with a 5.945 to 5.960 mm stem, 13202AA520, 13202AA410 and 13202AA411 on the EJ207, 13202AA530, 13202AA570, 13202AA630 and 13202AA660 on the 2.5 litre. Built for standard power, they suffer once tuning raises boost, revs or gas temperature.

FERREA and SUPERTECH reinforced exhaust valves

The burnt gases leave through the exhaust valve, and it is the part that runs hottest: the metal of its head reaches 760 to 870 °C on a naturally aspirated engine and goes beyond 1,000 °C when turbocharged, as most of these EJ engines are. Around 75 % of that heat flows through the seat and 20 % through the guide. An EV8 family valve steel still withstands 550 MPa at 600 °C but only 300 MPa at 800 °C: beyond that, the head overheats, fatigues, may distort and no longer seals.

The reinforced versions use materials made for these temperatures. SUPERTECH offers black nitrided stainless steel, whose hardened, smooth surface limits friction and wear, Inconel, a nickel-based superalloy holding 860 MPa at 730 °C and still 554 MPa near 815 °C, about 85 % more than EV8 steel near 800 °C and recommended with a turbo, and a hollow sodium filled Nimonic version that carries heat from the head to the stem. FERREA supplies its 6000 series special alloy and the nickel-based Super Alloy of its Competition Plus range, with 20 % more hot strength and 25 % longer seat life.

Larger heads are also offered: 32.5 mm (+0.5 mm) and 33 mm (+1 mm) instead of 32 mm. The burnt gases leave the cylinder faster, to the benefit of the fresh charge and of power. They fit a cylinder head with seats machined to that size.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F6075*8 FERREA Standard 32.0 mm 5.96 mm 104.8 mm Special alloy
F6076*8 FERREA +1 mm 33.0 mm 5.96 mm 104.8 mm Special alloy
F1514P*8 FERREA Standard 32.0 mm 5.96 mm 104.8 mm Super Alloy (nickel base)
F1519P*8 FERREA +1 mm 33.0 mm 5.96 mm 104.8 mm Super Alloy (nickel base)
SEVN-1010-8 SUPERTECH Standard 32.0 mm 5.96 mm 104.7 mm Black nitrided stainless
SEVN-1012-8 SUPERTECH +0.5 mm 32.5 mm 5.96 mm 104.7 mm Black nitrided stainless
SEVN-1012-2-8 SUPERTECH +0.5 mm 32.5 mm 5.96 mm 104.2 mm Black nitrided stainless
SEVI-1010-8 SUPERTECH Standard 32.0 mm 5.96 mm 104.7 mm Inconel
SEVI-1012-8 SUPERTECH +0.5 mm 32.5 mm 5.96 mm 104.7 mm Inconel
SEVI-1014-8 SUPERTECH +1 mm 33.0 mm 5.96 mm 104.7 mm Inconel
SEVI-1014-2-8 SUPERTECH +1 mm 33.0 mm 5.96 mm 104.2 mm Inconel
SEVI-1014-HS-8 SUPERTECH +1 mm 33.0 mm 5.96 mm 104.7 mm Sodium filled Nimonic

Valve fitting

PartSubaru originalReinforced
Collets 13210AA020 K10061
Valve stem seals 13211AA050 (EJ205, EJ207) ; 13211AA100 / 13211AA110 / 13211AA120 (EJ255) VS1015
Valve guide 13213-AA120 GDE-SUEJ6-E-8

On reassembly, each valve gets sound collets, original (13210AA020) or K10061, seated properly in the stem groove; a marked collet is replaced.

A 32.5 or 33 mm head needs exhaust seats machined to its diameter: the cylinder head then goes to the machine shop during its rebuild.

The SEVN-1012-2-8 and SEVI-1014-2-8 are 0.5 mm shorter (104.2 mm), with the groove moved by the same amount: check the stem height on reassembly.

Technical guide

Our brands

SUPERTECH SUPERTECH Performance, based in Silicon Valley, has designed valves, springs, titanium retainers and guides for racing for more than thirty years. Each valve, in stainless steel, titanium or Inconel, is developed for a specific engine and proven with drag racing, rally and circuit engine builders.
FERREA FERREA Racing Components, launched in 1978 by Horacio Ferrea and Daniel Urrutia, machines its valves in Florida and Argentina, from stainless steel to titanium by way of nickel-based superalloys. Engine builders all over the world, from NASCAR to drag racing, fit its parts.

How to choose

All these valves keep the engine's 5.96 mm stem: what remains to choose is the head size and the material, according to the tuning and the condition of the cylinder head.

CriterionOption 1Option 2
Size Standard size, 32 mm
For a cylinder head whose exhaust seats have never been recut: the head keeps its production diameter.
+0.5 mm or +1 mm, 32.5 or 33 mm
The burnt gases leave faster and make more room for the fresh charge, which helps the power gain (about 10 to 12 cfm per mm of head). Seats to be machined to the new size; also makes up for seats that have already been reground.
Material Special alloy, black nitrided stainless steel
For a road engine or moderate tuning: 6000 series alloy or stainless steel with a hardened surface, available in every size.
Super Alloy, Inconel, sodium filled Nimonic
Nickel-based superalloys, far stronger when hot: the choice for high boost; the sodium version also draws heat away from the head.

When reinforced valves become necessary

  • Sharper camshafts or stiffer valve springs
  • Higher rev limit
  • Raised boost pressure or a bigger turbo (Inconel version recommended)
  • Cylinder head rebuild on a rally, circuit or drift car
  • Production valves marked, worn or already at repair size

Vehicle compatibility

ModelEngine codePowerYears
Forester (SF_) 2.0 EJ205 170-177 hp 1998-2002
Forester (SG_, S11SG) 2.0 EJ205 177-220 hp 2002-2007
Forester (SG_, S11SG) 2.5 EJ255 / EJ257 211-256 hp 2003-2009
Forester (SH_) 2.0 EJ205 230 hp 2007-2012
Forester (SH_) 2.5 EJ255 230-270 hp 2008-2015
Impreza Saloon (GC) 2.0 EJ205 / EJ207 / EJ20G 211-280 hp 1992-2000
Impreza Estate (GF) 2.0 EJ205 / EJ207 / EJ20G / EJ20U 211-280 hp 1993-2000
Impreza Coupé (GFC) 2.0 EJ207 / EJ20G 211-280 hp 1996-2000
Impreza Saloon (GD) 2.0 EJ205 / EJ207 204-320 hp 2000-2007
Impreza Estate (GG) 2.0 EJ205 / EJ207 218-280 hp 2000-2007
Impreza Saloon (GD) 2.5 EJ255 / EJ257 230-300 hp 2005-2008
Impreza Estate (GG) 2.5 EJ255 / EJ257 230-300 hp 2005-2008
Impreza Saloon (GE, GV) 2.5 EJ255 / EJ257 230-320 hp 2007-
Impreza Estate 2.5 EJ255 / EJ257 233-309 hp 2007-2011
Impreza Hatchback (GR, GH, G3) 2.5 EJ255 / EJ257 230-400 hp 2008-2014
Impreza Saloon (GE, GV) 2.0 EJ207 309 hp 2010-2015
Legacy I (BC) 2.0 EJ20-GN 200 hp 1992-1994
Legacy I Estate (BC, BF, BJ) 2.0 EJ20-GN 200 hp 1992-1994
Legacy IV Estate (BP) 2.0 EJ20X / EJ20Y 190-272 hp 2003-2009
Legacy IV (BL) 2.0 EJ20X / EJ20Y 179-272 hp 2003-2015
Legacy IV (BL) 2.5 EJ255 / EJ25DET 233-264 hp 2004-2009
Legacy IV Estate (BP) 2.5 EJ255 / EJ25DET 233-264 hp 2004-2009
Legacy V Estate (BR) 2.5 EJ255 265-286 hp 2009-2014
Legacy V (BM) 2.5 EJ255 233-286 hp 2009-2015
Outback (BP) 2.5 EJ255 / EJ25DET 233-265 hp 2005-2009
WRX Hatchback (GP) 2.5 EJ257 300 hp 2010-2014
WRX Saloon (GJ) 2.5 EJ255 / EJ257 233-310 hp 2011-
WRX Estate 2.5 EJ255 / EJ257 233-309 hp 2011-
WRX Saloon (VA) 2.0 EJ207 308 hp 2013-2022
WRX Saloon (VA) 2.5 EJ257 301 hp 2013-2022
WRX Saloon (GJ) 2.0 EJ207 308 hp 2016-

OEM part number (exhaust valve): 13202AA400, 13202AA401, 13202AA410, 13202AA411, 13202AA520 (EJ205, EJ207, EJ20X) ; 13202AA530, 13202AA570, 13202AA630, 13202AA660 (EJ255, EJ257)

Important: one set of 8 equips a complete engine (two exhaust valves per cylinder). Every part number fits the EJ207. The F1514P*8 and F1519P*8 are limited to the EJ207; the F6075*8 and F6076*8 also cover the EJ205 and EJ20-GN; the SEVN-1012-8 and SEVN-1012-2-8 cover the EJ205, EJ20G and EJ20U; the SEVN-1010-8 and the five SEVI fit every code in the table. The naturally aspirated 2.5 litre EJ251 and EJ253, with one camshaft per cylinder head, and the FA20 engines are not covered on this page.

Don't forget the inlet valves

With an EJ cylinder head off, take the opportunity to replace the inlet valves and valve stem seals too, and rebuild with an entirely new valvetrain.

Subaru EJ20 EJ205 EJ207 EJ255 EJ257 inlet valves →

16 other products in the same category

Viewed products

Loading...