Skip to content
  • In stock
Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA111 (19 mm pin) for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA111 (19 mm pin) for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA111 (19 mm pin) for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA111 (19 mm pin) for forged pistons

Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA111 (19 mm pin) for forged pistons

€515.52 (tax incl.)
€644.40 (tax incl.) -20%

Set of 4 forged 4340 connecting rods for Audi/Volkswagen 1.4 TSI EA111.

  • Brands: ZRP
  • Compatibility: VW Golf V/VI, Scirocco, Jetta ; Audi A1 ; SEAT ; Škoda Octavia, Yeti
  • Engine codes: CAVD, CAXA
  • Bolts included: ARP 2000 or L19
R-VW-004-H
20 in stock in Europe (72h lead time)
Pay in installments

The 1.4 TSI EA111 engine

The 1.4 TSI from the EA111 family is an inline four-cylinder petrol engine with direct injection and forced induction, launched in the mid-2000s within the Volkswagen group. Displacing 1,390 cc (76.5 mm bore, 75.6 mm stroke), it was built mainly between 2005 and 2015. Depending on the version it uses a single turbocharger or, on the most powerful variants, a turbo combined with a supercharger (Twincharger). It appears across a broad VAG range: Volkswagen Golf V and VI, Golf Plus, Jetta, EOS, Scirocco, Beetle, Touran, Sharan and Tiguan, Audi A1, SEAT Toledo and Alhambra, Škoda Octavia, Rapid and Yeti, with outputs from roughly 122 to 170 hp depending on the engine code (CAXA, CAVA, CAVD, BLG). This generation pairs a 19 mm piston pin with a 144 mm connecting-rod center-to-center.

Compact and a favourite with tuners, the 1.4 TSI soon pushes its factory rod to the limit as boost, engine speed and torque rise. On the most heavily worked engines it is the first part to give way. Fitting forged connecting rods is therefore the decisive reliability step to exploit the full potential of a tuned EA111 with confidence.

The forged connecting rods

Dedicated to the 1.4 TSI EA111, our forged connecting rods are forged from wrought 4340 steel, the benchmark for the most demanding builds. They suit every use: circuit and track days, drift, rally, drag, time attack and hillclimb, on a heavily tuned street engine as much as on a competition unit. From Stage 2 to high-power Stage 3, then up to Stage 4 and beyond, they follow the power climb without ever compromising on strength. Each set contains 4 weight-matched rods and faithfully keeps the original 19 mm pin and 144 mm center-to-center.

Where the factory rod stays sized for very high-volume cost, the 4340 forged rod delivers a markedly greater mechanical margin: around +19% on yield strength, +8% on tensile strength and +19 to +37% on fatigue life. This reserve lets the small boosted 1.4 absorb cylinder-pressure peaks and inertial loads without any crack initiation. For this engine we choose the ZRP H profile, shaped to withstand torque and boost.

Technical specifications of the 1.4 TSI EA111 forged rods (19 mm pin, 144 mm center-to-center)

ReferenceBrandProfileRod boltsPin bore (mm)Small-end width (mm)Big-end bore (mm)Big-end width (mm)Center-to-center (mm)Weight (g)
R-VW-004-H ZRP H ARP 2000-5/16"-38mm 19 50.6 23 144 467
R-VW-004-H-L19 ZRP H ARP L19-5/16"-38mm 19 50.6 23 144 467

ZRP: Rods without oil feed drilling.

Tightening torque and stretch

The torque and stretch figures below are given as a guide for each bolt grade; always refer to your rod manufacturer’s data sheet. The stretch method, using a dial gauge, remains the benchmark for a reliable preload.

ReferenceBrandRod boltsTorqueRecommended stretch
R-VW-004-H ZRP ARP 2000-5/16"-38mm 40.7 N·m 0.140 to 0.152 mm
R-VW-004-H-L19 ZRP ARP L19-5/16"-38mm 54.2 N·m 0.127 to 0.140 mm

Technical guide

Forged 4340 steel: what is it?

4340 is a highly alloyed nickel-chromium-molybdenum steel prized for its rare balance of strength and toughness. Chosen in aerospace as well as motorsport, it is quenched then tempered, refining its grain and giving it top-tier endurance. Against a widely used sintered steel it brings about +19% yield strength, +8% tensile strength and +19 to +37% fatigue life: this margin is what separates a factory rod from a forged rod able to cope with a tuned engine.

The rod profile offered

Profil H

H profile. Made up of two broad flat flanks joined by a central web, its H-shaped section gives the rod a massive, even silhouette from one end to the other. On a turbocharged engine such as the 1.4 TSI EA111, this robust and versatile profile suits mainstream builds, from making the bottom end reliable when switching to forged pistons to a measured increase in boost pressure.

How to choose your rod bolts? ARP

The rod bolt is one of the most heavily stressed parts of the engine: it must keep the cap firmly clamped despite endlessly repeated inertial loads. The grade is chosen according to the target power and the operating engine speed. On this listing both grades are offered in 5/16".

ARP 2000

ARP 2000. With a tensile strength of about 220,000 psi (≈ 1,517 MPa), ARP 2000 covers the vast majority of builds. In 5/16" it comfortably handles up to about 150 hp per cylinder, at engine speeds reaching 8,500 rpm. It is the ideal all-round choice for circuit, track day, drift, rally, drag and hillclimb.

ARP L19

ARP L19. More capable, ARP L19 develops about 260,000 psi (≈ 1,793 MPa). In 5/16" it targets the most heavily loaded engines, up to about 200 hp per cylinder, at engine speeds approaching 10,000 rpm. It is reserved for high boost and sustained high rpm; sensitive to corrosion and hydrogen, it demands quality oil and careful storage.

Measuring bolt stretch

Manufacturers recommend tightening to stretch rather than to torque: measuring the bolt’s actual stretch with a dial gauge ensures an even, reliable preload from one rod to the next, whereas a torque wrench depends on thread friction. Each bolt has a target stretch range: you measure the free bolt, then the tightened bolt, and the difference must fall within the recommended window.

Mesure allongement

See the ARP stretch gauge

The brand offered

ZRP

ZRP. Designed by Alex Drakos in Athens (Greece), ZRP rods are machined with high precision from 4340 steel and delivered weight-matched to ±1 g. Offered here in the H profile with ARP 2000 or ARP L19 bolts, they stand out in circuit, drift, rally and drag as a robust solution.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the 1.4 TSI EA111 engine

This table gathers the vehicles powered by the Audi Volkswagen 1.4L 16V TSI EA111. Measure the piston pin diameter and the rod length before ordering to rule out any fitting error. Variant concerned: 19 mm pin.

MakeModel (chassis)Engine codePowerYears
Volkswagen Golf V / VI, Golf Plus V, Jetta III / IV, EOS, Scirocco III, Beetle, Tiguan CAVD 160 hp 2008–2018
Audi A1 (8X1, 8XK / 8XA, 8XF) CAXA 122 hp 2010–2015
SEAT Toledo IV (KG3) CAXA 122 hp 2012–2015
Škoda Octavia II (1Z), Rapid (NH), Yeti (5L) CAXA 122 hp 2008–2015
Volkswagen Golf V / VI, Golf Plus V, EOS CAXA 122 hp 2007–2016
SEAT Alhambra (710, 711) CAVA 150 hp 2010–2015
Volkswagen Jetta IV, Sharan (7N), Tiguan (5N) CAVA 150 hp 2007–2018
Volkswagen Golf V (1K1), Golf Plus V, Jetta III (1K2), Touran (1T) BLG 170 hp 2005–2010

Why is it the most economical solution?

Replacing the factory rods with forged rods during a build remains the most cost-effective spend: it costs only a fraction of a new engine or of a full rebuild after failure. On a heavily worked 1.4 TSI, a forged rod prevents the failure that takes out block, crankshaft and cylinder head. It is a lasting mechanical insurance to unlock the engine’s potential with peace of mind.

3 other products in the same category

Viewed products

Loading...