2.0 16v - K20A K20Z
Manufacturers
2.0 16v - K20A K20Z
View larger Warning: Last items in stock!
338430R
New product
ATHENA reinforced head gasket, reference 338430R, for:
-HONDA Stream 2.0 16V K20A1 156hp
-HONDA CIVIC VII Hatchback 2.0 Type-R K20A2 200hp
-HONDA CIVIC VII Hatchback 2.0 i Sport K20A3 160hp
-HONDA INTEGRA coupe 2.0 K20A3 160hp
-HONDA ACCORD VII 2.4 K24A 190hp
-HONDA ACCORD VII Tourer 2.4 K24A 190hp
ATHENA reinforced head gasket, reference 338430R
Fitment:
-HONDA Stream 2.0 16V K20A1 156hp 05/2001 -
-HONDA CIVIC VII Hatchback 2.0 Type-R K20A2 200hp 09/2001 - 09/2005
-HONDA CIVIC VII Hatchback 2.0 i Sport K20A3 160hp 09/2001 - 09/2005
-HONDA INTEGRA coupe 2.0 K20A3 160hp 02/2002 -
-HONDA ACCORD VII 2.4 K24A 190hp 02/2003 - 05/2008
-HONDA ACCORD VII Tourer 2.4 K24A 190hp 04/2003 - 05/2008
Type: MLS range
Bore: 87mm
Compressed thickness: 0.85mm
Technical specification:
The head gasket is one of the most important parts of the engine, and also one of the most fragile. It sits between the cylinder head and the cylinder block, and its job is to keep the engine working properly. A good head gasket must seal the combustion chambers completely and maintain the continuity and the sealing of the water and oil circuits. This part therefore has to withstand heavy thermal, mechanical and chemical loads, and it must be in good condition if engine failure is to be avoided. On an engine built for motorsport, the head gasket takes far greater loads, which is why a reinforced head gasket is the right choice. Athena is an internationally recognised specialist in reinforced head gaskets and builds them to a very high standard.
The gaskets offered here come from the MLS range. These reinforced MLS head gaskets replace the original gasket and improve on it, and they are perfectly suited to heavy thermal, mechanical and chemical loads.
ATHENA head gaskets are made up of 3 to 5 stainless steel layers. On top of that, the gasket is built with folded layer technology, which lets it take higher compression ratios or a move to forced induction. A special coating is applied to the surface to increase its sealing ability. These products go through a long series of quality tests to guarantee gaskets that are sound, reliable and efficient.
Please note that changing a head gasket is a fairly technical job. If you are not confident, have it fitted by a professional.
Image for illustrative purposes only
