Sort and filter
- Piston Pins, Circlips and Piston Rings
- KS Kolbenschmidt bearings
- Valve collets
- Graduated disc for camshaft timing
- Grease/Gasket for Reinforced Cylinder Head Bolts and Studs
- Shims for mechanical cam followers
- ARP Reinforced Crankshaft Bearing Bolts/Studs
- ARP reinforced connecting rod bolts
- ACL ref
- BY REFERENCE ARP - Reinforced Cylinder Head Screws/Studs
- BY REFERENCE ATHENA - Reinforced cylinder head gaskets
- BY REFERENCE CATCAMS - Camshafts
- BY REFERENCE CATCAMS - Reinforced spring cups
- BY REFERENCE CATCAMS - Mechanical Cam Followers
- BY REFERENCE CATCAMS - Reinforced Valve Springs
- BY REFERENCE COMETIC - Reinforced cylinder head gaskets
- BY REFERENCE FERREA - Reinforced spring cups
- BY REFERENCE FERREA - Reinforced valve springs
- FERREA REFERENCE - Reinforced Valves
- NGK REFERENCE - Spark Plugs
- BY REFERENCE KENT CAMS - Reinforced Timing Belt
- BY REFERENCE SUPERTECH - Mechanical Cam Followers
- BY REFERENCE VIBRA-TECHNICS - Engine Mounts
- BY REFERENCE VIBRA-TECHNICS - Gearbox/Transmission Support
Sort by:
Filter By
BY REFERENCE ARP - Reinforced Cylinder Head Screws/Studs
A reinforced head gasket only seals if the head is clamped to suit: it is the stud that does the work, not the gasket. Fifteen ARP part numbers are active on this page. Complete kits follow the…A reinforced head gasket only seals if the head is clamped to suit: it is the stud that does the work, not the gasket. Fifteen ARP part numbers are active on this page. Complete kits follow the seven-digit catalogue format, three digits for the application then four for the kit, for instance 204-4706 or 251-4703. Individual spares use a different, letter-based code for a nut, a washer or a short bolt: they let you top up a part-used kit without buying another. Both generic kits and kits aimed at a specific engine are listed, BMW M40 and M42 or the VAG 1.8 T 20V AEB.
