Manufacturers

BY REFERENCE KENT CAMS - Reinforced Timing Belt

BY REFERENCE KENT CAMS - Reinforced Timing Belt 

There are 24 products.
Showing 1 - 24 of 24 items
BY REFERENCE KENT CAMS - Reinforced Timing Belt
Kent Cams makes its belts in Britain for engines whose camshaft timing has been altered, with a pitch and a carcass able to take stiffer springs without jumping a tooth. Twenty-four part numbers are active on this page. The numbering is a plain catalogue run, CB followed by two digits, from CB02 to CB33: no segment within it codes a manufacturer or a capacity. Selection therefore rests on the physical data of the belt, tooth count and width, taken off the fitted part or supplied by the engine builder. A reinforced belt removes none of the usual precautions: set the tension with the proper tool and renew the tensioner at the same time.