• On order
Forged pistons Porsche 964 3.6 M64, Ø 100-105 mm Forged pistons Porsche 964 3.6 M64, Ø 100-105 mm

Forged pistons 3.6L 12v M64 Porsche

€1,225.91 (tax incl.)
€1,751.30 (tax incl.) -30%

Forged pistons Porsche 911 (964) 3.6 M64: bore 100 OEM, pin 23 mm, CR 11.3:1 (Carrera) / 7.5:1 (Turbo). Complete table of references JE/Wossner 100-105 mm + vehicles & OEM.

JE-274636
On order, 15 to 30 days lead time

ORDER TODAY, WE SHIP IN 5 - 15 DAYS

Pay in installments

Specifications of the forged pistons offered by NSB Concept for Porsche 911 3.6 L 12 V M64 (964) :

Reference OEM Bore
100,00 mm		 OEM CR 11,3 :1 (Carrera) / 7,5 :1 (Turbo 3.6) OEM Pin
23 mm		 Height OEM Pin
31,80 mm		 Range Coating Aluminium Forging Dome Weight Rings
JE-381261 100.0 11:1 23 31.8 JE NC 4032 NC NC NC NC
JE-274637 100.0 11.5:1 23 31.8 JE Round NC 2618 Round 40.8 488.0 NC
JE-353306 100.0 11.5:1 23 31.8 JE Round NC 2618 Round 40.8 NC NC
K9016DA 100.0 11.8:1 23 31.7 Wossner NC NC Slipper 40.16 NC 1000XSY
K9017DA 100.0 11.8:1 23 31.7 Wossner NC NC Slipper 40.16 NC 1000XSY
JE-274636 100.0 12.5:1 23 31.8 JE NC 2618 NC 45.8 NC NC
JE-353307 100.0 12.5:1 23 31.8 JE Round NC 2618 Round 45.8 NC NC
K9196D200 102.0 8.2:1 23 31.7 Wossner NC NC NC 6.65 NC 1020XSK
JE-381262 102.0 11:1 23 31.8 JE NC 4032 NC NC NC NC
JE-274046 102.0 11.5:1 23 31.8 JE Round NC 2618 Round 38.8 494.0 NC
JE-353308 102.0 11.5:1 23 31.8 JE Round NC 2618 Round 38.8 NC NC
K9016D200 102.0 11.8:1 23 31.7 Wossner NC NC Slipper 40.16 NC 1020XSK
K9017D200 102.0 11.8:1 23 31.7 Wossner NC NC Slipper 40.16 NC 1020XSK
JE-274045 102.0 12.5:1 23 31.8 JE Round NC 2618 Round 44.0 506.0 NC
JE-353309 102.0 12.5:1 23 31.8 JE Round NC 2618 Round 44.0 NC NC
JE-381263 103.12 11:1 23 31.8 JE NC 4032 NC NC NC NC
JE-353310 103.15 11.5:1 23 31.8 JE Round NC 2618 Round 37.7 NC NC
JE-353311 103.15 12.5:1 23 31.8 JE Round NC 2618 Round 43.0 NC NC
JE-381264 105.03 11:1 23 31.8 JE NC 4032 NC NC NC NC
JE-353312 105.03 11.5:1 23 31.8 JE Round NC 2618 Round 35.7 NC NC
JE-353313 105.03 12.5:1 23 31.8 JE Round NC 2618 Round 41.2 NC NC


Compatibility (engine codes):

  • M64/01 — Carrera 2 / Carrera 4 (manual gearbox)
  • M64/02 — Carrera 2 Tiptronic
  • M64/03 — Carrera RS 3.6
  • M64/50 — Turbo 3.6


Original vehicles equipped with the flat‑6 M64 3.6 :

Brand Model Engine code Power Years
Porsche 911 (964) Carrera 4 M64/01 250 hp 1989 – 1993
Porsche 911 (964) Carrera 2 M64/01 250 hp 1990 – 1993
Porsche 911 (964) Carrera 2 Tiptronic M64/02 250 hp 1990 – 1993
Porsche 911 (964) Carrera RS M64/03 260 hp 1992 – 1993
Porsche 911 (964) Turbo 3.6 M64/50 360 hp 1993 – 1994


OEM piston references :

  • 964 Carrera 2 / 4 (M64/01, M64/02) 100 mm, 11.3:1: Mahle piston/cylinder kits (ex. 964 103 915 25 – to be confirmed by VIN/PR Codes and selection A/B/C).
    964 Carrera RS 3.6 (M64/03): piston/cylinder assemblies matched specific RS – check by VIN.
    964 Turbo 3.6 (M64/50): specific low compression pistons (≈7.5:1) – references dedicated to Turbo 3.6.

    *Important: indicative references. Always validate with the series number (VIN) and the Porsche EPC.

Warning: Before installation, please verify the integrity and conformity of each component of the piston kit as well as the correctness of the assembly in the engine; any warranty is strictly limited to the parts included in the piston kit.

4 other products in the same category

Viewed products