Skip to content
  • In stock
Trimetal connecting rod bearings 50 mm Alfa Romeo 1.3 to 2.0 Trimetal connecting rod bearings 50 mm Alfa Romeo 1.3 to 2.0

Trimetal connecting rod bearings 50 mm Alfa Romeo 1.3 to 2.0

€75.14 (tax incl.)
€83.48 (tax incl.) -10%

Set of 8 trimetal connecting rod half-bearings for Alfa Romeo 1.3 to 2.0 (Ø 50 mm).

  • Brand and treatment: ACL Race, King Racing
  • Compatibility: Giulia, Giulietta, Alfetta, Spider, GTV, 75, 90, 155, 164
  • Available sizes: standard and +0.25 mm
4B1110H-STD
39 in stock in Europe (72h lead time)
Pay in installments

The Alfa Romeo four-cylinder twin-cam engines

The Alfa Romeo four-cylinder twin-cam engines, from 1.3 to 2.0 litres with 8 valves, power the Giulia, Giulietta, Alfetta, Spider, GTV, 75, 90, 155 and 164, including the Twin Spark versions. ACL and King list the same bearing set for these engines: a single set covers the family.

From the factory, these engines are fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

In a trimetal bearing, a steel back carries a copper-lead intermediate layer with high load capacity, itself covered by an anti-friction running layer that spares the crankpin. The set is supplied complete: 8 half shells, i.e. 4 pairs.

Trimetal targets high, sustained loads, whereas aluminium bi-metal is limited to low to medium loads: about 8,000 psi for the latter, up to 12,000 psi for a performance trimetal, 50% more. The benefit shows in strength and durability on turbo, supercharged and high-revving engines.

Technical specifications

Fitment dimensions common to all references
ACL / King bearings
Crankpin Ø 49.987 / 50.000 mm
Housing bore Ø 53.693 / 53.708 mm
Width 23.4 / 23.44 mm
ReferenceBrand and treatmentSizeWall thickness (mm)
4B1110H-STD ACL Race - Untreated Standard 1.836
4B1110H-.25 ACL Race - Untreated +0.25 1.961
CR4595XP King Racing - Untreated Standard 1.834
CR4595XP0.25 King Racing - Untreated +0.25 1.961

Running clearance

Running clearance is the gap between the bearing and the crankpin, filled by the oil film.

While the engine turns, the crankpin floats on this oil film, which carries the load without direct contact with the bearing. Film thickness depends on clearance: too tight, oil passes poorly, temperature rises and the risk of seizure grows; too wide, oil escapes, the film carries less and oil pressure decreases. A correct clearance ensures both sufficient lubrication and a well-maintained film.

Size / gradeWhen to choose itACL Race SeriesKing XP
Standard (STD) Standard journal, not reground 0.053 to 0.063 mm 0.050 mm
+0.25 mm Journal reground to 0.25 mm 0.053 to 0.063 mm 0.050 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

These ACL and King trimetal connecting rod bearings are aimed at built engines and racing: where a standard bearing quickly reaches its limit, they accept more power, more rpm and more boost. The range includes the standard size and a +0.25 mm regrind size. It allows the same part number to be kept after the crankshaft is reground and the clearance to be tailored to the oil used and the engine's duty.

The two brands

ACL An Australian specialist in high-performance engine bearings since 1949, ACL Bearing Company produces the Race Series: precisely made trimetal bearings, available in numerous sizes and recognised on built engines across the world.
King Racing Since the 1960s, Israel's King Engine Bearings has built high-performance engine bearings; its pMax Black trimetal alloy bearings are sized for heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No No
Available sizes Standard and +0.25 mm Standard and +0.25 mm

Vehicle compatibility

This connecting rod bearing set fits the engines of the following Alfa Romeo models:

BrandModel (chassis)Engine codePowerYears
ALFA ROMEO Giulia (105_) 1600 Super AR 00526 97–103 hp 1964–1978
ALFA ROMEO Giulia GT (105_) 1600 Super AR 00526 103 hp 1974–1978
ALFA ROMEO 1750-2000 (105_) 1750 AR 00548 113 hp 1968–1972
ALFA ROMEO Berlina (105_) 1750 AR 00548, AR 01608 118 hp 1968–1972
ALFA ROMEO GT (105_) 1600 / V 1750 AR 00526 S, AR 00536, AR 00548 102–113 hp 1963–1977
ALFA ROMEO Spider (105_) 1600 / 1750 / 2000 AR 00512, AR 00526, AR 00536, AR 00548, AR 01600 109–131 hp 1966–1977
ALFA ROMEO Spider (115_) 1600 / 2000 / 2.0 AR 00515, AR 00526, AR 00536, AR 01544, AR 01563, AR 01588, AR 01590, AR 01615 102–128 hp 1971–1993
ALFA ROMEO Alfetta (116_) 1.6 / 1.8 / 2.0 AR 01600, AR 01608, AR 01608 X, AR 01623, AR 01655, AR 01678, AR 01713 107–132 hp 1974–1984
ALFA ROMEO Alfetta GT (116_) 1.6 / 1.8 / 2.0 AR 01600, AR 01608, AR 01608 X, AR 01623, AR 01655 107–131 hp 1974–1986
ALFA ROMEO GTV (116_) 2.0 AR 01655 131 hp 1978–1986
ALFA ROMEO Giulietta (116_) 1.6 / 1.8 / 1.8 Turbo / 2.0 AR 01354, AR 01600, AR 01655, AR 01678 106–150 hp 1977–1985
ALFA ROMEO Sport Berline tricorps 2.0 AR 01623 112 hp 1977–1979
ALFA ROMEO 75 (162_) 1.6 / 1.6 Cat / 1.8 / 1.8 Turbo / 1.8 Turbo i.e. / 2.0 T.S. / 2.0 T.S Cat AR 06100, AR 06134, AR 06158, AR 06166, AR 06168, AR 06202, AR 06224, AR 61101, AR 61201, AR 61202, AR 67101 103–155 hp 1985–1992
ALFA ROMEO 90 (162_) 1.8 / 2.0 i.e. AR 01713, AR 06202 116–128 hp 1984–1987
ALFA ROMEO 155 (167_) 1.7 T.S. / 1.8 T.S. / 1.8 T.S. Sport / 2.0 T.S. AR 67101, AR 67102, AR 67103, AR 67105, AR 67201, AR 67402 105–144 hp 1992–1997
ALFA ROMEO 164 (164_) 2.0 Twin Spark AR 64103 144 hp 1992–1998

Why replace the bearings

Replacing the bearings during a build or rebuild guards against the most expensive failure: a worn-out connecting rod bearing scores the crankpin, contaminates the oil circuit with debris and forces at least a crankshaft regrind, or even a new rod and block. Against such costs a new set weighs little: it is the cheapest part of the rotating assembly, but the one whose failure costs the most.

2 other products in the same category

Viewed products

Loading...